
سيتم إشعارك عبر البريد الإلكتروني عند توفر هذا المنتج
- الوصف
- Reviews
- الشحن والدفع
The Schneider Electric BMXCPS3020H is an isolated DC power supply module from the Modicon X80 range, designed for automation systems operating in extended-temperature and demanding environmental conditions. It accepts a 24-48 V DC primary supply and provides separate power outputs for I/O module logic and the processor. Its reinforced environmental protection supports operation from -25 to 70 deg C.
Power Supply and Output Configuration
The BMXCPS3020H converts the incoming DC supply into the secondary power required by the X80 backplane. It provides separate 24 V DC and 3.3 V DC outputs for the I/O module supply and processor, and I/O logic circuits, respectively.
The available output power depends on the operating temperature. At temperatures from 0 to 60 deg C, the module provides up to 31.2 W at 24 V DC and 15 W at 3.3 V DC. Across the extended -25 to 70 deg C range, these ratings are reduced to 23.4 W and 11.3 W, respectively. This derating must be considered when calculating the power budget of the installed rack.
Input Protection and Status Monitoring
The primary circuit has an internal fuse that is not accessible for replacement. The secondary circuit includes overload, overvoltage, and short-circuit protection for the 24 V sensor power supply connection.
A green LED indicates that the rack voltage is OK. The module also includes a RESET pushbutton for a cold start, allowing the power supply and associated rack operation to be restarted through the designated reset function.
Electrical Connections and Mounting
The module uses a 5-pin connector for the DC supply input and protective earth, together with a 2-pin connector for the alarm relay. The specified maximum cable distances between devices are 10 m with 1.5 mm2 copper cable or 15 m with 2.5 mm2 copper cable.
Installation requires mounting the power supply in a compatible X80 module rack and securing it with two screws. The module has an IP20 protection rating and a maximum power dissipation of 8.5 W.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXCPS3020H |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Ruggedized DC Power Supply Module |
| Primary Input Voltage | 24-48 V DC, isolated |
| Primary Voltage Limits | 18-62.4 V DC |
| Input Current | 1.65 A at 24 V DC; 0.83 A at 48 V DC |
| Total Secondary Power | Up to 31.2 W |
| Secondary Output Voltage | 24 V DC / 3.3 V DC |
| Output Current | 1.3 A at 24 V DC; 4.5 A at 3.3 V DC |
| Secondary Power at 0 to 60 deg C | 31.2 W at 24 V DC; 15 W at 3.3 V DC |
| Secondary Power at -25 to 70 deg C | 23.4 W at 24 V DC; 11.3 W at 3.3 V DC |
| Maximum Power Dissipation | 8.5 W |
| Inrush Current | 30 A at 24 V DC; 60 A at 48 V DC |
| Status Indicator | 1 green LED |
| Reset Function | Cold-start RESET pushbutton |
| Alarm Connection | 2-pin connector |
| Power Connection | 5-pin connector with protective earth |
| Primary Circuit Protection | Internal, non-accessible fuse |
| Secondary Circuit Protection | Overload, overvoltage and short-circuit protection |
| Backplane Compatibility | Not compatible with BMEXBP..02 |
| Protection Rating | IP20 |
| Insulation Resistance | >= 10 MOhm, primary/earth and primary/secondary |
| Dielectric Strength | 1500 V, primary/earth and primary/secondary |
| Vibration Resistance | 3 Gn |
| Shock Resistance | 30 gn |
| Operating Temperature | -25 to 70 deg C |
| Storage Temperature | -40 to 85 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Operating Altitude | 0-2,000 m; derating required from 2,000 to 5,000 m |
| MTBF | 4,600,000 hours |
| Environmental Protection | Protective coating |
| Weight | 0.34 kg |
| EAN | 3595864029771 |
Environmental Resistance and Certifications
The BMXCPS3020H is designed for environments requiring additional resistance to gas, dust, sand, salt and biological contaminants. Its environmental specifications include gas resistance class Gx according to ISA S71.04, gas resistance class 3C4, dust and sand resistance class 3S4, and mold resistance class 3B2 according to IEC 60721-3-3.
The specified certifications and standards include:
- Certifications: CE, UL, CSA, RCM, EAC, Merchant Navy, ATEX Zone 2/22 and IECEx Zone 2/22.
- Standards: IEC 61131-2, IEC 61010-2-201, UL 61010-2-201 and CSA C22.2 No. 61010-2-201.
- Additional environmental standards: EN/IEC 61000-6-5 and EN/IEC 61850-3.
- Hazardous location classification: Class I, Division 2.
Frequently Asked Questions
Q: What is the difference between BMXCPS3020H and BMXCPS3020?
A: Both models belong to the Modicon X80 DC power supply family and use a 24-48 V DC isolated primary supply. The H version is the hardened version, intended for extended environmental conditions, including an operating temperature range of -25 to 70 deg C. Their environmental and installation requirements should be checked separately.
Q: Can BMXCPS3020H be installed on a BMEXBP..02 backplane?
A: No. BMXCPS3020H is a standalone power supply and is not compatible with BMEXBP..02 redundant power supply backplanes. The rack configuration must be checked before replacement or installation.
Q: Does the BMXCPS3020H provide the same output power throughout its operating temperature range?
A: No. Its output power is derated at extended temperatures. At 0 to 60 deg C, the ratings are 31.2 W at 24 V DC and 15 W at 3.3 V DC. From -25 to 70 deg C, these ratings decrease to 23.4 W and 11.3 W, respectively.
الدفع: تحويل مصرفي (T/T)، ويسترن يونيون.
ميناء الشحن: شيامن.
مدة التجهيز: عادةً من يوم إلى 3 أيام عمل بعد تأكيد الدفع (وفقًا لتوافر المخزون).
التوصيل worldwide: نشحن قطع الأتمتة الصناعية إلى العملاء حول العالم. تُدرج تكلفة الشحن ضمن عرض السعر الخاص بطلب عرض الأسعار (RFQ).
الأسئلة الشائعة
الأسئلة الشائعة حول عروض الأسعار والشحن والضمان والإرجاعانقر على طلب عرض سعر في صفحة المنتج وأرسل إلينا رقم القطعة والكمية المطلوبة وبلد الوجهة. سيرد فريق المبيعات لدينا بتوفر المنتج حاليًا وسعره ووقت التسليم التقديري.
تُجهَّز المنتجات المتوفرة عادةً بعد الدفع وتأكيد الطلب. تُشحن معظم الطلبات من مستودعنا في الصين، مع أن موقع الشحن قد يختلف حسب المخزون الحالي.
نعم. نشحن قطع الأتمتة الصناعية إلى العملاء في جميع أنحاء العالم. تعتمد تكلفة الشحن ومدة النقل على الوجهة ووزن الطرد وحجم المنتج ومتطلبات الاستيراد المحلية.
نستخدم عادةً خدمات شركات الشحن الدولية مثل DHL وFedEx وUPS وغيرها. ويمكن اختيار شركة الشحن وفقًا للوجهة وسرعة التسليم وحجم الشحنة ومتطلبات العميل.
تخضع منتجاتنا عمومًا لضمان لمدة 12 شهرًا. كما يمكن إرجاع المنتجات المؤهلة بموجب سياسة استرداد الأموال خلال 30 يومًا. يُرجى التواصل مع فريقنا قبل إرجاع أي منتج لتأكيد الشروط المعمول بها وتعليمات الإرجاع.
قد يعجبك أيضًا
منشورات المدونة
أخبار الأتمتة الصناعية، والأدلة التقنية، وتحديثات المنتجات.
