الانتقال إلى معلومات المنتج
1 من 3

Schneider BMXCPS3500H Modicon X80 Power Supply Module

18 في المخزون
  • Manufacturer: Schneider
  • Product No.: BMXCPS3500H
  • Country of origin: France
  • Product Type: Modicon X80 Power Supply Module
  • Condition: جديد تمامًا
  • Payment: تحويل بنكي/ويسترن يونيون
  • Weight: 0.36 kg
  • Shipping port: شيامن
  • Warranty: 12 شهرًا
  • الوصف
  • Reviews
  • الشحن والدفع

The Schneider Electric BMXCPS3500H is a Modicon X80 power supply module designed for severe environmental conditions. It converts a 100-240 V AC primary supply into the DC power required by the rack, processor, I/O modules and field sensors. Its configuration includes separate 3.3 V DC and 24 V DC secondary supply circuits, conformal coating and an extended operating temperature range.

Power Supply Configuration

The BMXCPS3500H provides separate secondary power circuits for rack electronics, I/O and processor loads, and sensor devices. Output capacity depends on the operating temperature range, so the applicable power ratings must be considered when calculating the rack power budget.

  • 3.3 V DC: Supplies internal logic power to I/O modules.
  • 24 V DC: Supplies the I/O modules and processor.
  • 24 V DC sensor supply: Provides power for connected field sensors.

At ambient temperatures from 0 to 60 deg C, the specified secondary power ratings are higher than those available across the extended -25 to 70 deg C operating range. This distinction is important when configuring a rack for high-temperature or low-temperature service.

Electrical Protection and Diagnostics

The primary circuit has an internal fuse that is not accessible for replacement. The secondary circuits include overload, overvoltage and short-circuit protection.

Two green status LEDs indicate rack voltage OK and sensor voltage status. A front-panel RESET push-button initiates a cold restart, providing a local means of restarting the power supply.

Backplane and Electrical Connections

The module has a 5-pin connector for line supply, protective earth and the 24 V DC sensor input, together with a separate 2-pin alarm relay connector. The backplane compatibility restriction is important for replacement selection: BMXCPS3500H is not compatible with BMEXBP..02 backplanes.

Technical Specifications

Parameter Specification
Model BMXCPS3500H
Brand Schneider Electric
Product Range Modicon X80
Product Type Power Supply Module
Application Severe environments
Primary Voltage 100-240 V AC
Primary Voltage Limits 85-264 V AC
Network Frequency 50/60 Hz
Frequency Limits 47-63 Hz
Apparent Power 0.12 kVA
Input Current 0.52 A at 240 V; 1.04 A at 115 V
Inrush Current 30 A at 120 V; 60 A at 240 V
3.3 V DC Logic Supply 15 W at 0 to 60 deg C; 11.3 W at -25 to 70 deg C
24 V DC I/O and Processor Supply 31.2 W at 0 to 60 deg C; 23.4 W at -25 to 70 deg C
24 V DC Sensor Supply 21.6 W at 0 to 60 deg C; 16.2 W at -25 to 70 deg C
Maximum Output Current 4.5 A at 3.3 V DC; 1.3 A at 24 V DC for I/O and processor; 0.9 A for sensor supply
Maximum Power Dissipation 8.5 W
Protection Primary internal fuse; secondary overload, overvoltage and short-circuit protection
Backplane Compatibility Not compatible with BMEXBP..02
Electrical Connections 5-pin line supply connector; 2-pin alarm relay connector
Status Indicators Green rack voltage OK LED; green sensor voltage LED
Reset Function RESET push-button, cold restart
IP Rating IP20
Operating Temperature -25 to +70 deg C
Storage Temperature -40 to +85 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Protective Treatment Conformal coating
Vibration Resistance 3 gn
Shock Resistance 30 gn
Immunity to Microbreaks 1 ms
Operating Altitude 0-2000 m; 2000-5000 m with derating
Insulation Resistance >= 100 Mohm, primary to ground and primary to secondary
Dielectric Strength 1500 V primary/secondary for logic and I/O supplies; 2300 V for sensor supply
Weight 0.36 kg
Country of Origin United States
GTIN 3595864029894

Environmental Resistance

The BMXCPS3500H has conformal coating and environmental resistance classifications for operation in demanding industrial environments.

Its documented environmental characteristics include:

  • Gas resistance: Class Gx, ISA S71.04.
  • Gas resistance: Class 3C4, IEC 60721-3-3.
  • Dust and sand resistance: Class 3S4, IEC 60721-3-3.
  • Mold and fungal spore resistance: Class 3B2, IEC 60721-3-3.
  • Salt resistance: Level 2, IEC 68252.
  • Hazardous location classification: Class I, Division 2.

Frequently Asked Questions

Q: Can the BMXCPS3500H operate at temperatures below 0 deg C?

A: Yes. Its specified operating temperature range extends from -25 to +70 deg C. However, the available secondary power ratings are reduced compared with operation between 0 and 60 deg C.

Q: Is the BMXCPS3500H compatible with all Modicon X80 backplanes?

A: No. The specified compatibility restriction excludes BMEXBP..02 backplanes. Check the exact backplane reference before selecting this module as a replacement.

Q: What happens if a secondary power circuit experiences an overload or short circuit?

A: The secondary circuits include overload, overvoltage and short-circuit protection. The module also provides separate rack voltage and sensor voltage status indicators for local diagnosis.

الدفع: تحويل مصرفي (T/T)، ويسترن يونيون.

ميناء الشحن: شيامن.

مدة التجهيز: عادةً من يوم إلى 3 أيام عمل بعد تأكيد الدفع (وفقًا لتوافر المخزون).

التوصيل worldwide: نشحن قطع الأتمتة الصناعية إلى العملاء حول العالم. تُدرج تكلفة الشحن ضمن عرض السعر الخاص بطلب عرض الأسعار (RFQ).

الأسئلة الشائعة

الأسئلة الشائعة حول عروض الأسعار والشحن والضمان والإرجاع

انقر على طلب عرض سعر في صفحة المنتج وأرسل إلينا رقم القطعة والكمية المطلوبة وبلد الوجهة. سيرد فريق المبيعات لدينا بتوفر المنتج حاليًا وسعره ووقت التسليم التقديري.

تُجهَّز المنتجات المتوفرة عادةً بعد الدفع وتأكيد الطلب. تُشحن معظم الطلبات من مستودعنا في الصين، مع أن موقع الشحن قد يختلف حسب المخزون الحالي.

نعم. نشحن قطع الأتمتة الصناعية إلى العملاء في جميع أنحاء العالم. تعتمد تكلفة الشحن ومدة النقل على الوجهة ووزن الطرد وحجم المنتج ومتطلبات الاستيراد المحلية.

نستخدم عادةً خدمات شركات الشحن الدولية مثل DHL وFedEx وUPS وغيرها. ويمكن اختيار شركة الشحن وفقًا للوجهة وسرعة التسليم وحجم الشحنة ومتطلبات العميل.

تخضع منتجاتنا عمومًا لضمان لمدة 12 شهرًا. كما يمكن إرجاع المنتجات المؤهلة بموجب سياسة استرداد الأموال خلال 30 يومًا. يُرجى التواصل مع فريقنا قبل إرجاع أي منتج لتأكيد الشروط المعمول بها وتعليمات الإرجاع.

Products FAQs

قد يعجبك أيضًا