الانتقال إلى معلومات المنتج
1 من 3

Schneider BMXEAE0300 Modicon X80 SSI Encoder Interface Module

18 في المخزون
  • Manufacturer: Schneider
  • Product No.: BMXEAE0300
  • Country of origin: France
  • Product Type: Modicon X80 SSI Encoder Interface Module
  • Condition: جديد تمامًا
  • Payment: تحويل بنكي/ويسترن يونيون
  • Weight: 0.138 kg
  • Shipping port: شيامن
  • Warranty: 12 شهرًا
  • الوصف
  • Reviews
  • الشحن والدفع

The Schneider BMXEAE0300 is a three-channel SSI encoder interface module in the Modicon X80 range. It acquires position data from 24 V DC SSI absolute encoders and transfers the digital information to the automation system. Each channel supports data lengths from 8 to 31 bits, with selectable transmission rates up to 1 MBaud. The module also provides digital input and reflex output functions for encoder-related signal handling.

Technical Specifications

Parameter Specification
Model BMXEAE0300
Brand Schneider Electric
Product Type SSI Encoder Interface Module
Product Series Modicon X80
Number of Channels 3 SSI channels
Data Format 8-31 bits
Transmission Rates 100 kBaud, 200 kBaud, 500 kBaud, 1 MBaud
Update Time 1 ms
Encoder Compatibility 24 V DC SSI absolute encoders
Encoder Voltage Range 19.2-30 V DC
Encoder Current Capacity 200 mA per channel
Digital Inputs 2 x 24 V DC inputs shared across 3 SSI channels
Digital Outputs 1 x 24 V DC digital reflex output per SSI channel
Nominal Operating Voltage 24 V DC
Operating Voltage Range 19.2-30 V DC
Operating Current Less than 30 mA at 24 V DC (typical)
Backplane Current Consumption 150 mA at 3.3 V DC (typical); 250 mA (maximum)
Dielectric Strength 1400 V DC for 60 s
Protection DC overvoltage protection
Protection Rating IP20
Operating Temperature 0 to 60 deg C
Operating Altitude 0-4000 m
Weight 0.138 kg
Mounting Module rack installation, secured with 2 screws
Certifications CE, UL, CSA, RCM, EAC, Merchant Marine
Standards IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, CSA C22.2 No. 61010-2-201
EU Directives 2014/35/EU, 2014/30/EU
EAN 3595864126685
Lifecycle Carbon Footprint 48 kg CO2 eq.

SSI Encoder Signal Processing

The BMXEAE0300 receives serial position data from SSI absolute encoders. SSI uses a synchronous serial communication method in which clock signals coordinate the transmission of encoder data to the receiving controller. The module supports data lengths between 8 and 31 bits, allowing different encoder resolution formats to be handled according to the selected configuration.

The three independent SSI channels allow multiple absolute encoders to be connected through one interface module. The available transmission rates are 100 kBaud, 200 kBaud, 500 kBaud and 1 MBaud. The specified update time is 1 ms, which is relevant when evaluating position acquisition requirements and controller response timing.

Digital I/O Functions

In addition to SSI data acquisition, the module provides digital signal interfaces associated with encoder operation:

  • Two 24 V DC digital inputs: Shared across the three SSI channels for signal acquisition and control-related functions.
  • Three 24 V DC reflex outputs: One output per SSI channel for encoder-related digital output functions.

These additional I/O points allow the module to handle associated digital signals without requiring every signal to be processed through a separate general-purpose I/O module. Their exact operating behavior depends on the configured module functions.

Power Supply and Backplane Consumption

The module operates with a nominal 24 V DC supply, with an allowable operating voltage range of 19.2-30 V DC. The encoder supply specification also identifies a current capacity of 200 mA per channel, which should be considered when checking the connected encoder load.

The backplane current consumption is specified separately from the encoder supply: 150 mA typical and 250 mA maximum at 3.3 V DC. These figures are relevant when calculating the power requirements of the Modicon X80 rack and checking the available capacity of its power supply.

Installation and Environmental Conditions

The BMXEAE0300 is designed for installation in a Modicon X80 module rack and must be secured using two screws. Its IP20 enclosure provides protection against contact with internal electrical components but does not provide protection against water ingress.

The specified operating temperature is 0 to 60 deg C, with an operating altitude of up to 4000 m. The module is listed for use in Modicon M340 and Modicon M580 automation architectures through the Modicon X80 common I/O platform.

Frequently Asked Questions

Q: How many SSI absolute encoders can the BMXEAE0300 connect?

A: The module provides three SSI channels, allowing connection of up to three compatible SSI absolute encoders. Each encoder must meet the specified 24 V DC interface and 200 mA per-channel supply conditions.

Q: What encoder data lengths and communication speeds does this module support?

A: The BMXEAE0300 supports data lengths from 8 to 31 bits and four transmission rates: 100 kBaud, 200 kBaud, 500 kBaud and 1 MBaud. The selected settings must match the connected encoder's communication specifications.

Q: Can the BMXEAE0300 be installed in a Modicon M340 or M580 system?

A: Yes. The module belongs to the Modicon X80 common I/O platform, which is specified for Modicon M340 and Modicon M580 automation architectures. The target rack configuration and system hardware compatibility should be checked before installation.

الدفع: تحويل مصرفي (T/T)، ويسترن يونيون.

ميناء الشحن: شيامن.

مدة التجهيز: عادةً من يوم إلى 3 أيام عمل بعد تأكيد الدفع (وفقًا لتوافر المخزون).

التوصيل worldwide: نشحن قطع الأتمتة الصناعية إلى العملاء حول العالم. تُدرج تكلفة الشحن ضمن عرض السعر الخاص بطلب عرض الأسعار (RFQ).

الأسئلة الشائعة

الأسئلة الشائعة حول عروض الأسعار والشحن والضمان والإرجاع

انقر على طلب عرض سعر في صفحة المنتج وأرسل إلينا رقم القطعة والكمية المطلوبة وبلد الوجهة. سيرد فريق المبيعات لدينا بتوفر المنتج حاليًا وسعره ووقت التسليم التقديري.

تُجهَّز المنتجات المتوفرة عادةً بعد الدفع وتأكيد الطلب. تُشحن معظم الطلبات من مستودعنا في الصين، مع أن موقع الشحن قد يختلف حسب المخزون الحالي.

نعم. نشحن قطع الأتمتة الصناعية إلى العملاء في جميع أنحاء العالم. تعتمد تكلفة الشحن ومدة النقل على الوجهة ووزن الطرد وحجم المنتج ومتطلبات الاستيراد المحلية.

نستخدم عادةً خدمات شركات الشحن الدولية مثل DHL وFedEx وUPS وغيرها. ويمكن اختيار شركة الشحن وفقًا للوجهة وسرعة التسليم وحجم الشحنة ومتطلبات العميل.

تخضع منتجاتنا عمومًا لضمان لمدة 12 شهرًا. كما يمكن إرجاع المنتجات المؤهلة بموجب سياسة استرداد الأموال خلال 30 يومًا. يُرجى التواصل مع فريقنا قبل إرجاع أي منتج لتأكيد الشروط المعمول بها وتعليمات الإرجاع.

Products FAQs

قد يعجبك أيضًا