الانتقال إلى معلومات المنتج
1 من 3

Schneider Electric BMXDDI3202K Modicon X80 Discrete Input Module

18 في المخزون
  • Manufacturer: Schneider
  • Product No.: BMXDDI3202K
  • Country of origin: France
  • Product Type: Modicon X80 Discrete Input Module
  • Condition: جديد تمامًا
  • Payment: تحويل بنكي/ويسترن يونيون
  • Weight: 0.112 kg
  • Shipping port: شيامن
  • Warranty: 12 شهرًا
  • الوصف
  • Reviews
  • الشحن والدفع

The Schneider Electric BMXDDI3202K is a 32-channel discrete input module from the Modicon X80 I/O platform, designed for Modicon M340 and M580 PLC architectures. It processes 24 VDC positive-logic (sink) field signals using a high-density 40-pin connector interface, allowing compact field wiring via pre-assembled cords or Telefast connection sub-bases.

Technical Specifications

Parameter Specification
Model BMXDDI3202K
Brand Schneider Electric
Series Modicon X80
Product Type Discrete Input Module
Number of Inputs 32 isolated discrete inputs
Input Voltage 24 VDC (positive logic / sink)
Input Wiring Mode 2-wire or 3-wire
Input Current 2.5 mA at 24 VDC
State 1 Voltage Threshold greater than or equal to 11 V
State 0 Voltage Threshold less than or equal to 5 V
State 1 Current Threshold greater than or equal to 2 mA
State 0 Current Threshold less than or equal to 0.5 mA
Input Impedance 9600 Ohm
Typical Response Time 4 ms
Maximum Response Time 7 ms
Sensor Power Supply 19 to 30 VDC
Sensor Supply Fault Threshold less than 14 VDC (fault), greater than 18 VDC (OK)
Current Consumption 160 mA at 3.3 VDC (backplane), 121 mA DC typical
Power Dissipation 3.9 W
Dielectric Isolation 1500 V AC (50/60 Hz, 1 min) primary/secondary; 500 VDC (1 min) between channel groups
Hot-Swapping Yes (fallback supported)
Local LED Indicators 1 green RUN, 1 red ERR, 1 red I/O, 32 green channel status LEDs
Coating Type Standard version (non-conformal coated)
Degree of Protection IP20
Operating Temperature 0 to 60 deg C
Storage Temperature -40 to 85 deg C
Operating Altitude 0 to 2000 m (2000 to 5000 m with derating)
Dimensions (H x W x D) 134.6 mm x 32 mm x 86 mm
Weight 0.112 kg

Signal Processing and Electrical Characteristics

The module accepts 24 VDC sink inputs compliant with IEC 61131-2 and IEC 60947-5-2 for 2-wire and 3-wire sensors. With a 9600 Ohm input impedance and 2.5 mA nominal input current at 24 VDC, it limits field power draw while guaranteeing State 1 recognition at 11 V or higher and State 0 at 5 V or lower.

Built-in sensor voltage supervision monitors the external 19 to 30 VDC field supply, triggering a fault state below 14 VDC and restoring normal status above 18 VDC. Input paralleling is not supported on this module.

Connector Interface and Mounting

Unlike screw-terminal Modicon X80 modules, the BMXDDI3202K uses a 40-pin connector (Pfostenstecker / HE10 style) to accommodate all 32 channels within a single 32 mm wide slot. Field connections require pre-wired 40-pin cordsets (such as BMXFCW or BMXFCC series) or Advantys Telefast ABE7 passive connection sub-bases.

The module mounts directly into a Modicon X80 backplane rack (for M340 or M580 local/remote I/O drops) and is secured with two captive mounting screws. Front-panel diagnostics include module-level RUN, ERR, and I/O LEDs alongside individual green status LEDs for each of the 32 channels.

Frequently Asked Questions

Q: How does the BMXDDI3202K connect to field sensors?A: It uses a 40-pin connector rather than removable screw terminals. You must connect it using pre-assembled 40-pin cables (like BMXFCW503 or BMXFCC series) or route signals through an Advantys Telefast ABE7 terminal block.

Q: What is the difference between BMXDDI3202K and the coated version?A: The BMXDDI3202K is the standard version without conformal coating, rated for 0 to 60 deg C operation and pollution degree 2. Applications requiring hardened conformal coating use the ruggedized variant (typically suffixed with H).

Q: Does the BMXDDI3202K support hot-swapping in a running rack?A: Yes, the module supports hot-swapping fallback when installed in compatible Modicon X80 racks, allowing replacement without powering down the entire PLC station.

الدفع: تحويل مصرفي (T/T)، ويسترن يونيون.

ميناء الشحن: شيامن.

مدة التجهيز: عادةً من يوم إلى 3 أيام عمل بعد تأكيد الدفع (وفقًا لتوافر المخزون).

التوصيل worldwide: نشحن قطع الأتمتة الصناعية إلى العملاء حول العالم. تُدرج تكلفة الشحن ضمن عرض السعر الخاص بطلب عرض الأسعار (RFQ).

الأسئلة الشائعة

الأسئلة الشائعة حول عروض الأسعار والشحن والضمان والإرجاع

انقر على طلب عرض سعر في صفحة المنتج وأرسل إلينا رقم القطعة والكمية المطلوبة وبلد الوجهة. سيرد فريق المبيعات لدينا بتوفر المنتج حاليًا وسعره ووقت التسليم التقديري.

تُجهَّز المنتجات المتوفرة عادةً بعد الدفع وتأكيد الطلب. تُشحن معظم الطلبات من مستودعنا في الصين، مع أن موقع الشحن قد يختلف حسب المخزون الحالي.

نعم. نشحن قطع الأتمتة الصناعية إلى العملاء في جميع أنحاء العالم. تعتمد تكلفة الشحن ومدة النقل على الوجهة ووزن الطرد وحجم المنتج ومتطلبات الاستيراد المحلية.

نستخدم عادةً خدمات شركات الشحن الدولية مثل DHL وFedEx وUPS وغيرها. ويمكن اختيار شركة الشحن وفقًا للوجهة وسرعة التسليم وحجم الشحنة ومتطلبات العميل.

تخضع منتجاتنا عمومًا لضمان لمدة 12 شهرًا. كما يمكن إرجاع المنتجات المؤهلة بموجب سياسة استرداد الأموال خلال 30 يومًا. يُرجى التواصل مع فريقنا قبل إرجاع أي منتج لتأكيد الشروط المعمول بها وتعليمات الإرجاع.

Products FAQs

قد يعجبك أيضًا