
سيتم إشعارك عبر البريد الإلكتروني عند توفر هذا المنتج
- الوصف
- Reviews
- الشحن والدفع
The BMXDDM3202K is a 24 VDC discrete mixed input/output module in the Schneider Electric Modicon X80 platform. It combines 16 positive-logic (sink) discrete inputs and 16 positive-logic (source) solid-state outputs within a single rack slot, using a 40-pin front connector for high-density field wiring in Modicon M340 and M580 automation architectures.
Channel Configuration and Electrical Characteristics
The input section meets IEC/EN 61131-2 Type 3 requirements with a 9600 Ohm input impedance, a typical response time of 4 ms (7 ms maximum), and sensor voltage supervision that flags faults below 14 VDC and confirms normal status above 18 VDC.
The output section provides 16 solid-state channels rated at 0.1 A nominal per channel (0.125 A maximum per channel, 3.2 A maximum per module) with a 1.2 ms output response time and a maximum voltage drop below 1.5 V in State 1. Up to 3 outputs can be connected in parallel to drive higher-current loads, and each output channel integrates reverse polarity and overvoltage protection.
System Compatibility and Mounting
The module operates across Modicon M340 and Modicon M580 PLC systems in both local racks and remote I/O drops. It draws up to 166 mA from the 3.3 VDC backplane bus and up to 104 mA at 24 VDC.
This standard-version unit features IP20 ingress protection and TC (all-climate) treatment for operation from 0 deg C to 60 deg C. Field signals connect via a 40-pin removable terminal block or pre-wired cordsets such as the BMXFCW503 paired with Modicon ABE7 Telefast sub-bases. The module installs directly into a Modicon X80 rack and secures with two captive mounting screws.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDM3202K |
| Brand | Schneider Electric |
| Series | Modicon X80 |
| Product Type | Discrete Mixed I/O Module |
| Discrete Inputs | 16 channels, 24 VDC, positive logic (IEC/EN 61131-2 Type 3) |
| Input Impedance | 9600 Ohm |
| Input Response Time | 4 ms typical, 7 ms maximum |
| Sensor Voltage Detection Threshold | Less than 14 VDC fault; greater than 18 VDC OK |
| Discrete Outputs | 16 channels, 24 VDC, positive logic solid-state |
| Rated Output Current | 0.1 A per channel (0.125 A max per channel, 3.2 A max per module) |
| Output Response Time | 1.2 ms |
| Output Voltage Drop | Less than 1.5 V in State 1 |
| Output Paralleling | Yes, maximum 3 outputs |
| Resistive Load Impedance | Less than or equal to 220 Ohm |
| Maximum Overload Time | 15 ms |
| Switching Frequency | 0.5 / LI^2 Hz |
| Protection Features | Reverse polarity protection (input and output), output overvoltage protection, external 0.5 A fast-blow fuse per input group |
| Current Consumption | Less than or equal to 104 mA at 24 VDC; less than or equal to 166 mA at 3.3 VDC |
| Dielectric Strength | 1500 VAC at 50/60 Hz for 1 min (output/ground, output/internal logic, primary/secondary); 500 VDC for 1 min (between input and output groups) |
| Insulation Resistance | Greater than 10 MOhm at 500 VDC |
| Front Connector | 40-pin connector |
| Ambient Operating Temperature | 0 deg C to 60 deg C |
| Relative Humidity | 5% to 95% at 55 deg C, non-condensing |
| Degree of Protection | IP20 |
| Coating | Standard version (TC all-climate treatment) |
| MTBF | 429,248 hours (430,000 hours nominal) |
| Weight | 0.11 kg |
| Certifications and Standards | CE, UL, CSA, RCM, EAC, UKCA, Merchant Navy; EN 61131-2 Type 3, EN 61000-6-5, EN 61850-3 |
Frequently Asked Questions
Q: How does the BMXDDM3202K differ from the BMXDDM3202KH?A: The BMXDDM3202K is the standard-coated version rated for 0 deg C to 60 deg C, whereas the "H" suffix variants in the Modicon X80 family add conformal coating and extended temperature ratings for harsh environments.
Q: Can outputs on the BMXDDM3202K be wired in parallel for higher load current?A: Yes, up to 3 output channels can be connected in parallel on this module to increase current capacity, provided the total module current does not exceed 3.2 A.
Q: What wiring accessories are required to connect field devices to this 40-pin module?A: The module uses a 40-pin front interface and requires a compatible 40-pin removable terminal block or pre-wired cordsets (such as BMXFCW503) connected to Modicon ABE7 Telefast wiring bases.
الدفع: تحويل مصرفي (T/T)، ويسترن يونيون.
ميناء الشحن: شيامن.
مدة التجهيز: عادةً من يوم إلى 3 أيام عمل بعد تأكيد الدفع (وفقًا لتوافر المخزون).
التوصيل worldwide: نشحن قطع الأتمتة الصناعية إلى العملاء حول العالم. تُدرج تكلفة الشحن ضمن عرض السعر الخاص بطلب عرض الأسعار (RFQ).
الأسئلة الشائعة
الأسئلة الشائعة حول عروض الأسعار والشحن والضمان والإرجاعانقر على طلب عرض سعر في صفحة المنتج وأرسل إلينا رقم القطعة والكمية المطلوبة وبلد الوجهة. سيرد فريق المبيعات لدينا بتوفر المنتج حاليًا وسعره ووقت التسليم التقديري.
تُجهَّز المنتجات المتوفرة عادةً بعد الدفع وتأكيد الطلب. تُشحن معظم الطلبات من مستودعنا في الصين، مع أن موقع الشحن قد يختلف حسب المخزون الحالي.
نعم. نشحن قطع الأتمتة الصناعية إلى العملاء في جميع أنحاء العالم. تعتمد تكلفة الشحن ومدة النقل على الوجهة ووزن الطرد وحجم المنتج ومتطلبات الاستيراد المحلية.
نستخدم عادةً خدمات شركات الشحن الدولية مثل DHL وFedEx وUPS وغيرها. ويمكن اختيار شركة الشحن وفقًا للوجهة وسرعة التسليم وحجم الشحنة ومتطلبات العميل.
تخضع منتجاتنا عمومًا لضمان لمدة 12 شهرًا. كما يمكن إرجاع المنتجات المؤهلة بموجب سياسة استرداد الأموال خلال 30 يومًا. يُرجى التواصل مع فريقنا قبل إرجاع أي منتج لتأكيد الشروط المعمول بها وتعليمات الإرجاع.
قد يعجبك أيضًا
منشورات المدونة
أخبار الأتمتة الصناعية، والأدلة التقنية، وتحديثات المنتجات.
