
سيتم إشعارك عبر البريد الإلكتروني عند توفر هذا المنتج
- الوصف
- Reviews
- الشحن والدفع
The Schneider Electric BMXDDO6402K is a 64-channel discrete transistor output module in the Modicon X80 range. It operates with a 24 VDC output supply and uses positive output logic. The module provides individual channel control, output status detection thresholds, and protection against reverse polarity, external short circuits, overloads, and overvoltage.
Output Configuration and Operation
The BMXDDO6402K provides 64 transistor output channels for controlling external actuators and other discrete loads. Its positive output logic determines the output switching arrangement. The specified output response time is 1.2 ms, which defines the delay between an output command and the corresponding output response.
The module supports output paralleling, with a maximum of three outputs. This configuration must follow the manufacturer's channel and load restrictions. The specified switching frequency is expressed as 0.5/LI² Hz, so the applicable load inductance and current conditions should be checked before selecting a switching rate.
Electrical Protection and Diagnostics
The output circuits include reverse-polarity, external short-circuit, overload, and overvoltage protection. An external fuse is also specified as part of the protection arrangement. These functions address electrical faults that can occur in field wiring and connected loads.
The module provides voltage detection thresholds for preactuator fault monitoring. A voltage below 14 VDC indicates a preactuator fault, while a voltage above 18 VDC is specified for preactuator detection at state 0. These thresholds are relevant when checking output-side voltage conditions during troubleshooting.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDO6402K |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Discrete Transistor Output Module |
| Number of Outputs | 64 |
| Output Technology | Solid-state transistor |
| Output Logic | Positive |
| Rated Output Voltage | 24 VDC |
| Output Voltage Range | 19-30 VDC |
| Rated Current per Channel | 0.1 A |
| Maximum Current per Module | 6.4 A |
| Output Response Time | 1.2 ms |
| Maximum Parallel Outputs | 3 |
| Maximum Overload Duration | 15 ms |
| Switching Frequency | 0.5/LI² Hz |
| Minimum Ohmic Load Impedance | 220 Ohm |
| Voltage Detection Threshold | Below 14 VDC: preactuator fault; above 18 VDC: preactuator at state 0 |
| Insulation Resistance | Greater than 10 MOhm at 500 VDC |
| Dielectric Strength | 1500 VAC, 50/60 Hz, 1 min (output/ground and output/internal logic); 500 VDC, 1 min (between channel groups) |
| Protection | Reverse polarity, short circuit, overload and overvoltage |
| Required External Fuse | 2 A fast-blow fuse per 16-channel group |
| IP Rating | IP20 |
| Protective Treatment | Standard version |
| MTBF | 150,000 hours |
| Net Weight | 0.15 kg |
| Country of Origin | USA |
| GTIN | 3595863910490 |
System Integration
The BMXDDO6402K belongs to the Modicon X80 common I/O platform, which is used with Modicon M340 and M580 programmable automation controllers. Its 64-channel configuration provides a high-density discrete output interface for rack-based control systems.
The module uses two 40-pin connectors for field output connections. The 64 channels are arranged in four groups of 16, with an external 2 A fast-blow fuse specified for each group. This grouping is important when planning field wiring and fault isolation.
Frequently Asked Questions
Q: What is the rated output current of the BMXDDO6402K?
A: The rated output current is 0.1 A per channel, with a maximum aggregate module current of 6.4 A. The total load must remain within the module limit even when multiple channels operate simultaneously.
Q: Can the BMXDDO6402K drive inductive loads?
A: The module supports transistor output switching, but the permissible switching frequency depends on load inductance and current. The specified frequency relationship is 0.5/LI² Hz. Check the load characteristics and manufacturer's switching limits before application.
Q: What external protection is required?
A: A 2 A fast-blow fuse is specified for each 16-channel group. The module also incorporates electronic overload, short-circuit, reverse-polarity and overvoltage protection.
الدفع: تحويل مصرفي (T/T)، ويسترن يونيون.
ميناء الشحن: شيامن.
مدة التجهيز: عادةً من يوم إلى 3 أيام عمل بعد تأكيد الدفع (وفقًا لتوافر المخزون).
التوصيل worldwide: نشحن قطع الأتمتة الصناعية إلى العملاء حول العالم. تُدرج تكلفة الشحن ضمن عرض السعر الخاص بطلب عرض الأسعار (RFQ).
الأسئلة الشائعة
الأسئلة الشائعة حول عروض الأسعار والشحن والضمان والإرجاعانقر على طلب عرض سعر في صفحة المنتج وأرسل إلينا رقم القطعة والكمية المطلوبة وبلد الوجهة. سيرد فريق المبيعات لدينا بتوفر المنتج حاليًا وسعره ووقت التسليم التقديري.
تُجهَّز المنتجات المتوفرة عادةً بعد الدفع وتأكيد الطلب. تُشحن معظم الطلبات من مستودعنا في الصين، مع أن موقع الشحن قد يختلف حسب المخزون الحالي.
نعم. نشحن قطع الأتمتة الصناعية إلى العملاء في جميع أنحاء العالم. تعتمد تكلفة الشحن ومدة النقل على الوجهة ووزن الطرد وحجم المنتج ومتطلبات الاستيراد المحلية.
نستخدم عادةً خدمات شركات الشحن الدولية مثل DHL وFedEx وUPS وغيرها. ويمكن اختيار شركة الشحن وفقًا للوجهة وسرعة التسليم وحجم الشحنة ومتطلبات العميل.
تخضع منتجاتنا عمومًا لضمان لمدة 12 شهرًا. كما يمكن إرجاع المنتجات المؤهلة بموجب سياسة استرداد الأموال خلال 30 يومًا. يُرجى التواصل مع فريقنا قبل إرجاع أي منتج لتأكيد الشروط المعمول بها وتعليمات الإرجاع.
قد يعجبك أيضًا
منشورات المدونة
أخبار الأتمتة الصناعية، والأدلة التقنية، وتحديثات المنتجات.
