{"product_id":"schneider-electric-bmxfta300-modicon-x80-prefabricated-cable-assembly","title":"Schneider Electric BMXFTA300 Modicon X80 Prefabricated Cable Assembly","description":"\u003cp\u003eThe \u003cstrong\u003eSchneider Electric BMXFTA300\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eBMXFTA300\u003c\/strong\u003e prefabricated cable assembly, provides the electrical connection between Modicon M340 I\/O modules and Advantys Telefast ABE 7 terminal blocks. It uses a 28-pin removable terminal block connector on the module side and a 25-pin SUB-D connector on the terminal block side, with a cable length of 3 m.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eHardware Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eBMXFTA300\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSchneider Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Series\u003c\/td\u003e\n\u003ctd\u003eModicon X80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003ePrefabricated Cable Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAccessory Type\u003c\/td\u003e\n\u003ctd\u003ePreformed Cable Set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e3 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule-Side Connection\u003c\/td\u003e\n\u003ctd\u003e1 removable 28-pin terminal block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal Block-Side Connection\u003c\/td\u003e\n\u003ctd\u003e1 SUB-D 25-pin connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Configuration\u003c\/td\u003e\n\u003ctd\u003e28-pin terminal block to 25-pin SUB-D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible I\/O Modules\u003c\/td\u003e\n\u003ctd\u003eBMXAMI0800, BMXAMI0810\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Terminal Blocks\u003c\/td\u003e\n\u003ctd\u003eABE7CPA02, ABE7CPA03, ABE7CPA31, ABE7CPA31\/E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging Quantity\u003c\/td\u003e\n\u003ctd\u003e1 unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e3595864080451\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e\u003cstrong\u003eI\/O Connection Architecture and Compatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe BMXFTA300 provides a preassembled electrical interface between Modicon M340 analog I\/O modules and Advantys Telefast ABE 7 connection systems.\u003c\/p\u003e\n\u003cp\u003eIts connection arrangement consists of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModule side:\u003c\/strong\u003e A removable 28-pin terminal block connects to the I\/O module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal block side:\u003c\/strong\u003e A 25-pin SUB-D connector connects to the ABE 7 terminal block.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable assembly:\u003c\/strong\u003e A fixed 3 m cable carries the corresponding electrical connections between both interfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe cable is specified for the BMXAMI0800 and BMXAMI0810 analog input modules. Compatibility also includes the ABE7CPA02, ABE7CPA03, ABE7CPA31, and ABE7CPA31\/E terminal block references.\u003c\/p\u003e\n\u003cp\u003eFor system integration, connector pin assignments and channel wiring must correspond to the selected I\/O module and terminal block configuration.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Can the BMXFTA300 be used with both BMXAMI0800 and BMXAMI0810?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Yes. Both analog input modules are explicitly listed as compatible products. The cable provides the 28-pin terminal block interface required on the module side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does the BMXFTA300 support hot-swapping?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Hot-swapping capability is not specified for this cable assembly. Disconnect the associated electrical circuits and follow the module manufacturer's maintenance procedure before removing or installing connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What should be checked when replacing an existing BMXFTA300?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Verify the 28-pin removable terminal block, 25-pin SUB-D connector, 3 m cable length, and compatibility with the installed ABE 7 terminal block. Check connector condition and wiring continuity before returning the I\/O circuit to service.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eField Installation Guidelines\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e1. \u003cstrong\u003eConnector Verification:\u003c\/strong\u003e Confirm that the 28-pin removable terminal block matches the designated Modicon I\/O module interface and that the 25-pin SUB-D connector matches the ABE 7 terminal block.\u003c\/p\u003e\n\u003cp\u003e2. \u003cstrong\u003eCable Routing:\u003c\/strong\u003e Route the 3 m cable away from high-voltage power conductors, motor cables, and sources of electromagnetic interference where practical.\u003c\/p\u003e\n\u003cp\u003e3. \u003cstrong\u003eMechanical Installation:\u003c\/strong\u003e Avoid excessive bending, tensile loading, twisting, or compression of the cable. Secure the assembly to prevent connector strain.\u003c\/p\u003e\n\u003cp\u003e4. \u003cstrong\u003eElectrical Inspection:\u003c\/strong\u003e Inspect connector contacts for oxidation, contamination, or mechanical damage before installation.\u003c\/p\u003e\n\u003cp\u003e5. \u003cstrong\u003eShielding and Grounding:\u003c\/strong\u003e Follow the module and terminal block installation documentation for cable shielding and grounding arrangements. Do not assume an undocumented shield termination configuration.\u003c\/p\u003e\n\u003cp\u003e6. \u003cstrong\u003eCommissioning:\u003c\/strong\u003e Verify connector engagement, wiring continuity, channel correspondence, and analog input signal readings before placing the associated control loop into operation.\u003c\/p\u003e","brand":"Schneider","offers":[{"title":"Default Title","offer_id":68129526055197,"sku":"BMXFTA300","price":9.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/5387\/3181\/files\/BMXFTA300.jpg?v=1795081701","url":"https:\/\/www.6gcontrols.com\/ar\/products\/schneider-electric-bmxfta300-modicon-x80-prefabricated-cable-assembly","provider":"6G Controls","version":"1.0","type":"link"}