{"product_id":"honeywell-cc-pdob01-51405043-175-digital-output-24v-module","title":"Honeywell CC-PDOB01 51405043-175 rəqəmsal çıxış G\/Ç modulu","description":"\u003cp\u003eThe Honeywell CC-PDOB01 (51405043-175) is described in the supplied material as a 32-channel, 24 V digital output module for switching external loads through discrete control signals. Its listed specifications include a maximum load voltage of 30 VDC, galvanic isolation rated at 1500 VAC RMS or +\/-1500 VDC, and maximum turn-on and turn-off times of 10 ms. These values help define the module's output interface and switching characteristics.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCC-PDOB01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrdering Number\u003c\/td\u003e\n\u003ctd\u003e51405043-175\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eDigital Output 24V Bussed Out 32-Channel Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Channels\u003c\/td\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Output Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Load Voltage\u003c\/td\u003e\n\u003ctd\u003e30 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOn-State Voltage\u003c\/td\u003e\n\u003ctd\u003e24 V typical, specified at 0.5 A load current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOff-State Voltage\u003c\/td\u003e\n\u003ctd\u003e0 VDC maximum; 3.3 VDC maximum indicated under no-load conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOff-State Leakage Current\u003c\/td\u003e\n\u003ctd\u003e0.5 uA maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGalvanic Isolation\u003c\/td\u003e\n\u003ctd\u003e1500 VAC RMS or +\/-1500 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTurn-On \/ Turn-Off Time\u003c\/td\u003e\n\u003ctd\u003e10 ms maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eOutput Operation and Load Limits\u003c\/h3\u003e\n\u003cp\u003eThe CC-PDOB01 is a bussed 24 VDC sourcing digital output module in Honeywell's Experion Series C I\/O family. It supplies switched DC power to field devices such as solenoid valves and interposing relays. The outputs share a common return, so field wiring and load grouping must account for this shared electrical reference.\u003c\/p\u003e\n\u003cp\u003eThe documented maximum load current is 0.5 A per channel and 6 A per module. Outputs are grouped in four sets of eight channels, with a 4 A maximum per group under the specified no-short condition. These limits must be considered together when sizing the field power supply and connecting loads.\u003c\/p\u003e\n\u003ch3\u003eProtection and Configuration\u003c\/h3\u003e\n\u003cp\u003eThe Series C specification describes electronic, fuse-less short-circuit protection. When a channel short circuit is detected, the module removes power from that field connection until the fault is corrected. The module also supports configurable output behavior on a per-channel basis, including holding the last value or changing to a configured safe value following the applicable failure condition.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe module is designed for the Honeywell Experion Series C I\/O platform and uses an associated Input\/Output Termination Assembly (IOTA). The documented assemblies include CC-TDOB01 for non-redundant use and CC-TDOB11 for redundant use. Confirm the installed IOTA, field-power arrangement, and system configuration before replacing an existing module.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How many field outputs does the CC-PDOB01 provide?\u003c\/p\u003e\n\u003cp\u003eA: It provides 32 sourcing digital output channels. Each channel supports up to 0.5 A, subject to the documented group and total module current limits.\u003c\/p\u003e\n\u003cp\u003eQ: What is the maximum load voltage?\u003c\/p\u003e\n\u003cp\u003eA: The documented maximum load voltage is 30 VDC. The nominal output is 24 VDC, and the specified typical on-state voltage is 24 V at a load current of 0.5 A.\u003c\/p\u003e\n\u003cp\u003eQ: Can the CC-PDOB01 be used in a redundant I\/O configuration?\u003c\/p\u003e\n\u003cp\u003eA: Yes. Honeywell's Series C I\/O specification identifies the CC-TDOB11 as the redundant IOTA option. Redundant operation requires the appropriate termination hardware and system configuration; it should not be assumed from the output module alone.\u003c\/p\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52750910193949,"sku":"CC-PDOB01 51405043-175","price":9.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/5387\/3181\/files\/849ada17fcc2941452c270_1000_a22e6843-f76d-46ca-875f-152adf6521ff.jpg?v=1787112621","url":"https:\/\/www.6gcontrols.com\/az\/products\/honeywell-cc-pdob01-51405043-175-digital-output-24v-module","provider":"6G Controls","version":"1.0","type":"link"}