
Obavijest e-poštom kada ovaj proizvod postane dostupan
- Opis
- Reviews
- Dostava i plaćanje
The GE IC200ALG320E is a 12-bit analog current output module for the VersaMax distributed I/O system. It provides four single-ended output channels, each delivering a 4-20 mA signal to external control devices. The module uses an external DC supply for its field-side outputs and supports selectable output behavior when normal backplane communication or power is interrupted.
Output Function and Signal Processing
The IC200ALG320E converts digital output data received from the VersaMax CPU or Network Interface Unit (NIU) into analog current signals. Its four output channels operate as current-sourcing outputs and are arranged in one group.
The 4-20 mA signal range supports analog control loops connected to devices such as positioners, control valves, and other current-operated equipment. Each channel receives its own output data, allowing the controller to command multiple field devices through one module.
Output Configuration and Failure Behavior
The module provides a jumper-selectable response for conditions such as loss of backplane power, interruption of communication, or a stopped controller. The outputs can be configured to return to a default value of 4 mA or hold their last output state.
This setting determines how connected equipment responds when normal output updates are unavailable. The configured behavior should therefore be checked before replacing an existing module, particularly where the analog output controls a process actuator.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | IC200ALG320E |
| Brand | GE |
| Series | VersaMax |
| Product Type | Analog Output Module |
| Number of Channels | 4 |
| Channel Configuration | Single-ended, one group |
| Output Signal | Current |
| Output Range | 4-20 mA |
| Resolution | 4 uA = 8 counts |
| Update Rate | 0.3 ms maximum |
| Accuracy at 25 deg C | +/-0.3% typical of full scale; +/-0.5% maximum |
| External Power Supply | 18-30 VDC, including ripple |
| External Current Consumption | 160 mA maximum, including load current |
| Backplane Current Consumption | 50 mA maximum at 5 V |
| Output Default Configuration | 4 mA or hold last state |
| LED Indicators | FLD PWR, OK |
| Dimensions | 10.9 x 6.4 x 5.8 cm |
| Weight | 0.2 kg |
Revision E Identification
The suffix E identifies a revision of the original IC200ALG320 module. Revision E features an improved latching mechanism compared with earlier versions. When sourcing a replacement, check the complete catalog number and mechanical retention arrangement rather than identifying the module only by its base number.
Installation and Field Wiring
The module requires a VersaMax I/O carrier and an external 18-30 VDC supply for its output circuits. Shielded twisted-pair cable is recommended for analog field connections to help limit electrical interference in the current signal wiring.
The FLD PWR LED indicates the presence of field-side power, while the OK LED indicates that backplane power is recognized. These indicators help distinguish a field power issue from a backplane power issue during maintenance.
Frequently Asked Questions
Q: What is the difference between IC200ALG320E and IC200ALG320?
A: Both belong to the same four-channel, 12-bit, 4-20 mA analog output module family. The IC200ALG320E is Revision E and features an improved latching mechanism.
Q: What happens to the outputs if backplane communication is interrupted?
A: The outputs follow the configured jumper setting. They can return to the 4 mA default value or retain their last output state. Verify the existing configuration before replacing the module.
Q: Does the IC200ALG320E require an external power supply?
A: Yes. Its analog output circuits require an external 18-30 VDC supply. The module also draws current from the 5 V backplane supply, so both power requirements must be considered when checking the installation.
Plaćanje: T/T, Western Union.
Luka otpreme: Xiamen.
Rok isporuke: Obično 1–3 radna dana nakon potvrde plaćanja (ovisno o zalihi).
Isporuka diljem svijeta: Industrijske dijelove za automatizaciju šaljemo kupcima diljem svijeta. Trošak prijevoza navodi se u vašem zahtjevu za ponudu.
Često postavljana pitanja
Česta pitanja o ponudama, dostavi, jamstvu i povratimaNa stranici proizvoda kliknite Zatražite ponudu i pošaljite nam broj dijela, potrebnu količinu i odredišnu zemlju. Naš prodajni tim odgovorit će vam s informacijama o trenutačnoj dostupnosti, cijeni i procijenjenom roku isporuke.
Artikli koji su na zalihi obično se pripremaju nakon plaćanja i potvrde narudžbe. Većina narudžbi šalje se iz našeg skladišta u Kini, iako se mjesto slanja može razlikovati ovisno o trenutačnim zalihama.
Da. Šaljemo dijelove za industrijsku automatizaciju kupcima diljem svijeta. Troškovi dostave i vrijeme isporuke ovise o odredištu, težini paketa, veličini proizvoda i lokalnim uvoznim zahtjevima.
Najčešće upotrebljavamo DHL, FedEx, UPS i druge međunarodne kurirske službe. Prijevoznik se može odabrati prema odredištu, brzini dostave, veličini pošiljke i zahtjevima kupca.
Naši su proizvodi općenito pokriveni 12-mjesečnim jamstvom. Proizvodi koji ispunjavaju uvjete mogu se također vratiti u skladu s našom 30-dnevnom politikom povrata novca. Obratite se našem timu prije vraćanja bilo kojeg artikla kako biste potvrdili primjenjive uvjete i upute za povrat.
Možda će vam se također svidjeti
Objave na blogu
Vijesti o industrijskoj automatizaciji, tehnički vodiči i novosti o proizvodima.
