Galerija medija
Galerija medija
Galerija medija

Honeywell FC-DCOM-485 V1.1 Communication Interface Module

15 na zalihi

Manufacturer: Honeywell
Product No.: FC-DCOM-485 V1.1
Country of origin: Sweden
Product Type: Communication Interface Module
Condition: Potpuno nov
Payment: T/T, Western Union
Weight: 0.3 lb
Shipping port: Xiamen
Warranty: 12 mjeseci

Opis
Reviews
Dostava i plaćanje

The Honeywell FC-DCOM-485 V1.1, also identified as the FC-DCOM-485 communication interface module, provides RS485/RS422 signal output for serial communication between connected control system equipment. It operates from a 5 VDC supply provided by the Control Processor(s), with a maximum input current of 500 mA and configurable communication signal formats supporting baud rates up to 2 MBaud.

Hardware Specifications

Parameter	Specification
Model	FC-DCOM-485 V1.1
Brand	Honeywell
Product Type	Communication Interface Module / RS485-RS422 Converter
Weight	0.30 lbs
Dimensions	110 x 70 x 61 mm
Power Consumption	Maximum 2.5 W at 5 VDC and 500 mA
Power Input Voltage	5 VDC +/-5%
Input Current	Maximum 500 mA
Power Source	Control Processor(s)
Output Interface	RS485/RS422
Output Signal Levels	According to EIA/TIA-485-A
Baud Rate	0-2 MBaud
Communication Formats	Transparent, Manchester, FM0, FM1
DIN Rail Compatibility	TS32 / TS35 x 7.5
Used Rail Length	117 mm
Approvals	CE; TUV and UL pending, according to supplied data

RS485/RS422 Communication Characteristics

The FC-DCOM-485 provides serial signal output compliant with the specified EIA/TIA-485-A electrical levels. Its supported baud rate range extends to 2 MBaud, with transparent, Manchester, FM0, and FM1 transmission formats listed in the product specifications.

The module receives its 5 VDC operating supply from the Control Processor(s). System integration must account for the maximum 500 mA input current when verifying processor power capacity. The selected transmission format and baud rate must match the requirements of the connected communication equipment.

Frequently Asked Questions (FAQ)

Q: What power supply does the FC-DCOM-485 require?

A: The module requires 5 VDC +/-5%, supplied by the Control Processor(s). The maximum specified input current is 500 mA.

Q: Which serial communication interfaces are supported?

A: The module provides RS485/RS422 output according to EIA/TIA-485-A electrical levels and supports baud rates up to 2 MBaud.

Q: Which DIN rails are compatible with this module?

A: The specified mounting options are TS32 and TS35 x 7.5 DIN rails. The listed rail length used by the installation is 117 mm.

Field Installation Guidelines

Mount the module on a compatible TS32 or TS35 x 7.5 DIN rail and secure it according to the enclosure and rail manufacturer's instructions.
Verify that the Control Processor(s) can supply 5 VDC within the specified +/-5% tolerance and support the module's maximum 500 mA current demand.
Confirm RS485/RS422 signal polarity, terminal assignments, and the selected communication format against the applicable Honeywell wiring documentation.
Route communication cables separately from high-voltage power conductors and high-noise switching circuits where practical.
Apply cable shielding and grounding according to the system grounding design. Avoid creating unintended ground loops.
Verify network termination and biasing requirements against the connected equipment documentation before commissioning.
Confirm the installed module revision and system compatibility before applying power.

Plaćanje: T/T, Western Union.

Luka otpreme: Xiamen.

Rok isporuke: Obično 1–3 radna dana nakon potvrde plaćanja (ovisno o zalihi).

Isporuka diljem svijeta: Industrijske dijelove za automatizaciju šaljemo kupcima diljem svijeta. Trošak prijevoza navodi se u vašem zahtjevu za ponudu.

Često postavljana pitanja

Česta pitanja o ponudama, dostavi, jamstvu i povratima

Na stranici proizvoda kliknite Zatražite ponudu i pošaljite nam broj dijela, potrebnu količinu i odredišnu zemlju. Naš prodajni tim odgovorit će vam s informacijama o trenutačnoj dostupnosti, cijeni i procijenjenom roku isporuke.

Artikli koji su na zalihi obično se pripremaju nakon plaćanja i potvrde narudžbe. Većina narudžbi šalje se iz našeg skladišta u Kini, iako se mjesto slanja može razlikovati ovisno o trenutačnim zalihama.

Da. Šaljemo dijelove za industrijsku automatizaciju kupcima diljem svijeta. Troškovi dostave i vrijeme isporuke ovise o odredištu, težini paketa, veličini proizvoda i lokalnim uvoznim zahtjevima.

Najčešće upotrebljavamo DHL, FedEx, UPS i druge međunarodne kurirske službe. Prijevoznik se može odabrati prema odredištu, brzini dostave, veličini pošiljke i zahtjevima kupca.

Naši su proizvodi općenito pokriveni 12-mjesečnim jamstvom. Proizvodi koji ispunjavaju uvjete mogu se također vratiti u skladu s našom 30-dnevnom politikom povrata novca. Obratite se našem timu prije vraćanja bilo kojeg artikla kako biste potvrdili primjenjive uvjete i upute za povrat.