Galerija medija
Galerija medija
Galerija medija

Honeywell TK-CCR013 Redundant ControlNet Interface Module

17 na zalihi

Manufacturer: Honeywell
Product No.: TK-CCR013
Product Type: Redundant ControlNet Interface Module
Condition: Potpuno nov
Payment: T/T, Western Union
Weight: 1.35 lb
Shipping port: Xiamen
Warranty: 12 mjeseci

Opis
Reviews
Dostava i plaćanje

The Honeywell TK-CCR013 is a dual-media redundant ControlNet interface module designed for communication within Honeywell Experion PKS control systems. It provides a redundant network interface for controller and system communication. The TK prefix identifies the conformal-coated version of the ControlNet module, distinguishing it from the corresponding TC-series version.

Communication Function

The TK-CCR013 belongs to the Series D ControlNet interface family and uses dual-media network redundancy. In a redundant network arrangement, the dual-media interface provides two communication paths, allowing the system architecture to maintain network connectivity through its redundant media configuration.

It is intended for ControlNet-based Experion PKS architectures. It should not be confused with a single-media ControlNet interface or an Ethernet communication module.

Technical Specifications

Parameter	Specification
Model	TK-CCR013
Brand	Honeywell
Product Type	Redundant ControlNet Interface Module
Network Type	ControlNet
Network Configuration	Dual-Media / Redundant
Module Series	Series D
Coating	Conformal-coated version
Supply Voltage	24 VDC (as listed in supplied product information)
Weight	1.35 lbs

Network Configuration and Compatibility

The module provides separate A and B connections for dual-media ControlNet networks. Honeywell documentation specifies that the A and B trunk cable drop connections must be connected to their corresponding module connectors when operating in a redundant-media configuration.

A dual-media module can also operate in a single-media network configuration. In that arrangement, the network drop cable must connect to port A.

Replacement and Lifecycle Information

The TK-CCR013 is identified as an obsolete Series D module in Honeywell's Experion PKS Control Hardware Installation Guide (Release 516).

Successor model: TK-CCR014, Series E dual-media redundant ControlNet interface.
Replacement consideration: If a CCR013 module fails in a redundant chassis pair, Honeywell specifies replacing both partner modules with Series E CCR014 modules.
Both modules in a redundant chassis pair must be the same type.
Replacement firmware and startup diagnostics must be checked before returning the system to operation.

Frequently Asked Questions

Q: What is the difference between TK-CCR013 and a single-media ControlNet module?

A: The TK-CCR013 supports dual-media ControlNet communication through separate A and B network connections. A single-media module uses only one network connection and does not provide the same dual-media configuration.

Q: Can the TK-CCR013 be replaced directly with a TK-CCR014?

A: The TK-CCR014 is the documented Series E successor. However, in a redundant chassis pair, both partner CCR013 modules must be replaced with CCR014 modules of the same type. Firmware compatibility and system configuration must also be verified.

Q: Is the TK-CCR013 hot-swappable?

A: Honeywell's installation procedure specifies switching off chassis power before removing the ControlNet module. Do not assume that this model supports removal under power.

Plaćanje: T/T, Western Union.

Luka otpreme: Xiamen.

Rok isporuke: Obično 1–3 radna dana nakon potvrde plaćanja (ovisno o zalihi).

Isporuka diljem svijeta: Industrijske dijelove za automatizaciju šaljemo kupcima diljem svijeta. Trošak prijevoza navodi se u vašem zahtjevu za ponudu.

Često postavljana pitanja

Česta pitanja o ponudama, dostavi, jamstvu i povratima

Na stranici proizvoda kliknite Zatražite ponudu i pošaljite nam broj dijela, potrebnu količinu i odredišnu zemlju. Naš prodajni tim odgovorit će vam s informacijama o trenutačnoj dostupnosti, cijeni i procijenjenom roku isporuke.

Artikli koji su na zalihi obično se pripremaju nakon plaćanja i potvrde narudžbe. Većina narudžbi šalje se iz našeg skladišta u Kini, iako se mjesto slanja može razlikovati ovisno o trenutačnim zalihama.

Da. Šaljemo dijelove za industrijsku automatizaciju kupcima diljem svijeta. Troškovi dostave i vrijeme isporuke ovise o odredištu, težini paketa, veličini proizvoda i lokalnim uvoznim zahtjevima.

Najčešće upotrebljavamo DHL, FedEx, UPS i druge međunarodne kurirske službe. Prijevoznik se može odabrati prema odredištu, brzini dostave, veličini pošiljke i zahtjevima kupca.

Naši su proizvodi općenito pokriveni 12-mjesečnim jamstvom. Proizvodi koji ispunjavaju uvjete mogu se također vratiti u skladu s našom 30-dnevnom politikom povrata novca. Obratite se našem timu prije vraćanja bilo kojeg artikla kako biste potvrdili primjenjive uvjete i upute za povrat.