
Obavijest e-poštom kada ovaj proizvod postane dostupan
- Opis
- Reviews
- Dostava i plaćanje
The Schneider Electric BMXCPS3500H is a Modicon X80 power supply module designed for severe environmental conditions. It converts a 100-240 V AC primary supply into the DC power required by the rack, processor, I/O modules and field sensors. Its configuration includes separate 3.3 V DC and 24 V DC secondary supply circuits, conformal coating and an extended operating temperature range.
Power Supply Configuration
The BMXCPS3500H provides separate secondary power circuits for rack electronics, I/O and processor loads, and sensor devices. Output capacity depends on the operating temperature range, so the applicable power ratings must be considered when calculating the rack power budget.
- 3.3 V DC: Supplies internal logic power to I/O modules.
- 24 V DC: Supplies the I/O modules and processor.
- 24 V DC sensor supply: Provides power for connected field sensors.
At ambient temperatures from 0 to 60 deg C, the specified secondary power ratings are higher than those available across the extended -25 to 70 deg C operating range. This distinction is important when configuring a rack for high-temperature or low-temperature service.
Electrical Protection and Diagnostics
The primary circuit has an internal fuse that is not accessible for replacement. The secondary circuits include overload, overvoltage and short-circuit protection.
Two green status LEDs indicate rack voltage OK and sensor voltage status. A front-panel RESET push-button initiates a cold restart, providing a local means of restarting the power supply.
Backplane and Electrical Connections
The module has a 5-pin connector for line supply, protective earth and the 24 V DC sensor input, together with a separate 2-pin alarm relay connector. The backplane compatibility restriction is important for replacement selection: BMXCPS3500H is not compatible with BMEXBP..02 backplanes.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXCPS3500H |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Power Supply Module |
| Application | Severe environments |
| Primary Voltage | 100-240 V AC |
| Primary Voltage Limits | 85-264 V AC |
| Network Frequency | 50/60 Hz |
| Frequency Limits | 47-63 Hz |
| Apparent Power | 0.12 kVA |
| Input Current | 0.52 A at 240 V; 1.04 A at 115 V |
| Inrush Current | 30 A at 120 V; 60 A at 240 V |
| 3.3 V DC Logic Supply | 15 W at 0 to 60 deg C; 11.3 W at -25 to 70 deg C |
| 24 V DC I/O and Processor Supply | 31.2 W at 0 to 60 deg C; 23.4 W at -25 to 70 deg C |
| 24 V DC Sensor Supply | 21.6 W at 0 to 60 deg C; 16.2 W at -25 to 70 deg C |
| Maximum Output Current | 4.5 A at 3.3 V DC; 1.3 A at 24 V DC for I/O and processor; 0.9 A for sensor supply |
| Maximum Power Dissipation | 8.5 W |
| Protection | Primary internal fuse; secondary overload, overvoltage and short-circuit protection |
| Backplane Compatibility | Not compatible with BMEXBP..02 |
| Electrical Connections | 5-pin line supply connector; 2-pin alarm relay connector |
| Status Indicators | Green rack voltage OK LED; green sensor voltage LED |
| Reset Function | RESET push-button, cold restart |
| IP Rating | IP20 |
| Operating Temperature | -25 to +70 deg C |
| Storage Temperature | -40 to +85 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Protective Treatment | Conformal coating |
| Vibration Resistance | 3 gn |
| Shock Resistance | 30 gn |
| Immunity to Microbreaks | 1 ms |
| Operating Altitude | 0-2000 m; 2000-5000 m with derating |
| Insulation Resistance | >= 100 Mohm, primary to ground and primary to secondary |
| Dielectric Strength | 1500 V primary/secondary for logic and I/O supplies; 2300 V for sensor supply |
| Weight | 0.36 kg |
| Country of Origin | United States |
| GTIN | 3595864029894 |
Environmental Resistance
The BMXCPS3500H has conformal coating and environmental resistance classifications for operation in demanding industrial environments.
Its documented environmental characteristics include:
- Gas resistance: Class Gx, ISA S71.04.
- Gas resistance: Class 3C4, IEC 60721-3-3.
- Dust and sand resistance: Class 3S4, IEC 60721-3-3.
- Mold and fungal spore resistance: Class 3B2, IEC 60721-3-3.
- Salt resistance: Level 2, IEC 68252.
- Hazardous location classification: Class I, Division 2.
Frequently Asked Questions
Q: Can the BMXCPS3500H operate at temperatures below 0 deg C?
A: Yes. Its specified operating temperature range extends from -25 to +70 deg C. However, the available secondary power ratings are reduced compared with operation between 0 and 60 deg C.
Q: Is the BMXCPS3500H compatible with all Modicon X80 backplanes?
A: No. The specified compatibility restriction excludes BMEXBP..02 backplanes. Check the exact backplane reference before selecting this module as a replacement.
Q: What happens if a secondary power circuit experiences an overload or short circuit?
A: The secondary circuits include overload, overvoltage and short-circuit protection. The module also provides separate rack voltage and sensor voltage status indicators for local diagnosis.
Plaćanje: T/T, Western Union.
Luka otpreme: Xiamen.
Rok isporuke: Obično 1–3 radna dana nakon potvrde plaćanja (ovisno o zalihi).
Isporuka diljem svijeta: Industrijske dijelove za automatizaciju šaljemo kupcima diljem svijeta. Trošak prijevoza navodi se u vašem zahtjevu za ponudu.
Često postavljana pitanja
Česta pitanja o ponudama, dostavi, jamstvu i povratimaNa stranici proizvoda kliknite Zatražite ponudu i pošaljite nam broj dijela, potrebnu količinu i odredišnu zemlju. Naš prodajni tim odgovorit će vam s informacijama o trenutačnoj dostupnosti, cijeni i procijenjenom roku isporuke.
Artikli koji su na zalihi obično se pripremaju nakon plaćanja i potvrde narudžbe. Većina narudžbi šalje se iz našeg skladišta u Kini, iako se mjesto slanja može razlikovati ovisno o trenutačnim zalihama.
Da. Šaljemo dijelove za industrijsku automatizaciju kupcima diljem svijeta. Troškovi dostave i vrijeme isporuke ovise o odredištu, težini paketa, veličini proizvoda i lokalnim uvoznim zahtjevima.
Najčešće upotrebljavamo DHL, FedEx, UPS i druge međunarodne kurirske službe. Prijevoznik se može odabrati prema odredištu, brzini dostave, veličini pošiljke i zahtjevima kupca.
Naši su proizvodi općenito pokriveni 12-mjesečnim jamstvom. Proizvodi koji ispunjavaju uvjete mogu se također vratiti u skladu s našom 30-dnevnom politikom povrata novca. Obratite se našem timu prije vraćanja bilo kojeg artikla kako biste potvrdili primjenjive uvjete i upute za povrat.
Možda će vam se također svidjeti
Objave na blogu
Vijesti o industrijskoj automatizaciji, tehnički vodiči i novosti o proizvodima.
