
Obavijest e-poštom kada ovaj proizvod postane dostupan
- Opis
- Reviews
- Dostava i plaćanje
The Schneider Electric BMXDRA1605 is a 16-channel discrete relay output module in the Modicon X80 series. It provides normally open (NO) relay contacts for switching external AC or DC loads, with a specified switching capacity of 3 A. The module supports 24-240 V AC and 24-48 V DC applications and is designed for integration into Modicon M340 and M580 automation platforms.
Output Function and Configuration
The BMXDRA1605 uses electromechanical relay contacts to switch external loads according to output commands from the PLC. Its 16 normally open outputs remain open when de-energized and close when the corresponding output relay is activated.
The AC and DC voltage ranges allow the module to control different types of field circuits. The minimum switching current is 1 mA at 5 V DC, which is relevant when evaluating low-current loads. The specified output response times are less than 8 ms for activation and 10 ms for deactivation.
Platform Compatibility and Mounting
The module belongs to the Modicon X80 I/O platform, which provides a common module architecture for Modicon M340 and M580 PLC systems, including local and remote I/O configurations. It is installed in a compatible module rack and secured with two screws.
The connection is made through a 20-pin removable terminal block. The source identifies cage-clamp, screw-clamp and removable spring-terminal block options. The terminal block and associated wiring should be selected according to the cabinet configuration and field wiring requirements.
Electrical Isolation and Environmental Conditions
The module has an insulation resistance greater than 10 MOhm at 500 V DC and a dielectric withstand rating of 2000 V AC at 50/60 Hz for 1 minute. These specifications describe its insulation characteristics and should be considered when checking the separation requirements between control and field circuits.
The BMXDRA1605 has an IP20 protection rating and supports operation from 0 to 60 deg C. Relative humidity is specified as 5-95% at 55 deg C, without condensation. Its reported MTBF is approximately 2.1 million hours.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDRA1605 |
| Brand | Schneider Electric |
| Series | Modicon X80 |
| Product Type | Discrete Relay Output Module |
| Number of Outputs | 16 |
| Output Type | Normally Open (NO) Relay Contacts |
| Switching Voltage | 24-240 V AC / 24-48 V DC |
| Switching Current | 3 A |
| Minimum Switching Current | 1 mA at 5 V DC |
| Output Response Time - Activation | Less than 8 ms |
| Output Response Time - Deactivation | 10 ms |
| Discrete Output Logic | Positive |
| Insulation Resistance | Greater than 10 MOhm at 500 V DC |
| Dielectric Withstand Voltage | 2000 V AC at 50/60 Hz for 1 min |
| MTBF | Approximately 2,100,000 h |
| Mounting | Modicon X80 Module Rack; secured with 2 screws |
| Connection | 20-pin removable terminal block |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Coating | Standard version |
| Product Weight | 0.15 kg |
| EAN | 3595863909234 |
| Environmental Carbon Footprint | 146 kg CO2 eq. |
Frequently Asked Questions
Q: How many relay outputs does the BMXDRA1605 provide?
A: It provides 16 normally open relay outputs. Each output switches an external circuit in response to its corresponding PLC output command.
Q: Can the BMXDRA1605 switch both AC and DC loads?
A: Yes. The specified switching voltage ranges are 24-240 V AC and 24-48 V DC, with a rated switching current of 3 A. The actual load must also comply with the applicable contact ratings and switching conditions.
Q: Which PLC platforms support the BMXDRA1605?
A: The module is specified for Modicon M340 and Modicon M580 PLC platforms, including local and remote I/O configurations. A compatible Modicon X80 rack and 20-pin terminal block are required.
Output Protection and Switching Limits
For inductive loads, the external circuit requires suitable suppression to limit switching overvoltage. Schneider's technical documentation specifies discharge diodes for DC outputs and RC circuits or ZNO surge limiters for AC outputs.
The manufacturer's product datasheet specifies a conventional free-air thermal current (Ith) of 2 A. It also provides load-dependent electrical durability ratings under AC-12, AC-15, DC-12 and DC-13 utilization categories. These ratings should be checked against the actual load rather than treating the 3 A figure in the product listing as a universal continuous switching rating.
Plaćanje: T/T, Western Union.
Luka otpreme: Xiamen.
Rok isporuke: Obično 1–3 radna dana nakon potvrde plaćanja (ovisno o zalihi).
Isporuka diljem svijeta: Industrijske dijelove za automatizaciju šaljemo kupcima diljem svijeta. Trošak prijevoza navodi se u vašem zahtjevu za ponudu.
Često postavljana pitanja
Česta pitanja o ponudama, dostavi, jamstvu i povratimaNa stranici proizvoda kliknite Zatražite ponudu i pošaljite nam broj dijela, potrebnu količinu i odredišnu zemlju. Naš prodajni tim odgovorit će vam s informacijama o trenutačnoj dostupnosti, cijeni i procijenjenom roku isporuke.
Artikli koji su na zalihi obično se pripremaju nakon plaćanja i potvrde narudžbe. Većina narudžbi šalje se iz našeg skladišta u Kini, iako se mjesto slanja može razlikovati ovisno o trenutačnim zalihama.
Da. Šaljemo dijelove za industrijsku automatizaciju kupcima diljem svijeta. Troškovi dostave i vrijeme isporuke ovise o odredištu, težini paketa, veličini proizvoda i lokalnim uvoznim zahtjevima.
Najčešće upotrebljavamo DHL, FedEx, UPS i druge međunarodne kurirske službe. Prijevoznik se može odabrati prema odredištu, brzini dostave, veličini pošiljke i zahtjevima kupca.
Naši su proizvodi općenito pokriveni 12-mjesečnim jamstvom. Proizvodi koji ispunjavaju uvjete mogu se također vratiti u skladu s našom 30-dnevnom politikom povrata novca. Obratite se našem timu prije vraćanja bilo kojeg artikla kako biste potvrdili primjenjive uvjete i upute za povrat.
Možda će vam se također svidjeti
Objave na blogu
Vijesti o industrijskoj automatizaciji, tehnički vodiči i novosti o proizvodima.
