Prijeđi na informacije o proizvodu
1 od 3

Schneider BMXDRA1605H Modicon X80 Discrete Relay Output Module

18 na zalihi
  • Manufacturer: Schneider
  • Product No.: BMXDRA1605H
  • Country of origin: France
  • Product Type: Modicon X80 Discrete Relay Output Module
  • Condition: Potpuno nov
  • Payment: T/T, Western Union
  • Weight: 0.15 kg
  • Shipping port: Xiamen
  • Warranty: 12 mjeseci
  • Opis
  • Reviews
  • Dostava i plaćanje

The Schneider Electric BMXDRA1605H is a 16-channel discrete relay output module in the Modicon X80 series. It provides normally open (NO) relay contacts for switching external AC or DC loads from a PLC control system. The module features a conformal coating, IP20 protection and an extended operating temperature range of -25 to 70 deg C for installations requiring additional environmental resistance.

Technical Specifications

Parameter Specification
Model BMXDRA1605H
Brand Schneider Electric
Series Modicon X80
Product Type Discrete Relay Output Module
Number of Outputs 16
Output Type Normally Open (NO) relay contacts
Discrete Output Logic Positive
Rated Switching Current 3 A
Switching Voltage 24-240 VAC / 24-48 VDC
Minimum Switching Load 1 mA at 5 VDC
Output Response Time Less than 8 ms (activation); 10 ms (deactivation)
Insulation Resistance Greater than 10 MOhm at 500 VDC
Dielectric Strength 2000 VAC at 50/60 Hz for 1 minute
Protection Rating IP20
Protective Coating Conformal coating
Operating Temperature -25 to 70 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
MTBF 2,100,000 hours (source value; see editorial note)
Weight 0.15 kg
EAN 3595864025803
Environmental Carbon Footprint 148 kg CO2 eq.

Relay Output Function

The BMXDRA1605H uses electromechanical relay contacts to switch external loads. The PLC controls the relay coils, while the relay contacts provide the switching path for the connected field circuits. Its 16 normally open outputs remain open when the corresponding relays are de-energized and close when activated.

The relay output arrangement supports both AC and DC switching within the specified voltage ranges. The minimum switching load of 1 mA at 5 VDC is a separate contact operating parameter and should not be confused with the maximum rated switching current.

Environmental Protection and Construction

This version has a conformal protective coating intended for environments with specified resistance requirements. The manufacturer lists gas resistance classifications Gx and 3C4, dust and sand resistance classifications 3S4, salt resistance Level 2, and mould resistance Class 3B2.

The IP20 rating describes protection against access to hazardous parts and solid foreign objects. It does not indicate protection against water ingress. The extended temperature range and environmental classifications should be considered when checking suitability for the actual control cabinet installation.

PLC Platform and Installation

The BMXDRA1605H belongs to the common Modicon X80 I/O platform used with Modicon M340 and Modicon M580 programmable automation controllers. It can be installed in local or remote I/O configurations, subject to the applicable rack and system configuration requirements.

The module uses a removable 20-pin terminal block for field wiring. Installation requires mounting the module on the appropriate rack and securing it with two screws. Compatible terminal block connection options include cage-clamp, screw-clamp and removable spring-clamp types.

Frequently Asked Questions

Q: What is the difference between BMXDRA1605H and BMXDRA1605?

A: Both references belong to the Modicon X80 16-channel relay output family. The BMXDRA1605H is the ruggedized version with conformal coating and an extended operating temperature range for more demanding environmental conditions.

Q: Which PLC platforms support the BMXDRA1605H?

A: The module is specified for Modicon M340 and Modicon M580 PLC platforms, including local and remote I/O configurations. The appropriate rack and terminal block must be selected for the installation.

Q: What protection should be considered when wiring the relay outputs?

A: Output circuit protection is required. Schneider Electric documentation specifies fast-acting fuses for output protection and recommends suitable discharge or suppression components according to the AC or DC load type. Verify the wiring diagram and load conditions before commissioning.

Plaćanje: T/T, Western Union.

Luka otpreme: Xiamen.

Rok isporuke: Obično 1–3 radna dana nakon potvrde plaćanja (ovisno o zalihi).

Isporuka diljem svijeta: Industrijske dijelove za automatizaciju šaljemo kupcima diljem svijeta. Trošak prijevoza navodi se u vašem zahtjevu za ponudu.

Često postavljana pitanja

Česta pitanja o ponudama, dostavi, jamstvu i povratima

Na stranici proizvoda kliknite Zatražite ponudu i pošaljite nam broj dijela, potrebnu količinu i odredišnu zemlju. Naš prodajni tim odgovorit će vam s informacijama o trenutačnoj dostupnosti, cijeni i procijenjenom roku isporuke.

Artikli koji su na zalihi obično se pripremaju nakon plaćanja i potvrde narudžbe. Većina narudžbi šalje se iz našeg skladišta u Kini, iako se mjesto slanja može razlikovati ovisno o trenutačnim zalihama.

Da. Šaljemo dijelove za industrijsku automatizaciju kupcima diljem svijeta. Troškovi dostave i vrijeme isporuke ovise o odredištu, težini paketa, veličini proizvoda i lokalnim uvoznim zahtjevima.

Najčešće upotrebljavamo DHL, FedEx, UPS i druge međunarodne kurirske službe. Prijevoznik se može odabrati prema odredištu, brzini dostave, veličini pošiljke i zahtjevima kupca.

Naši su proizvodi općenito pokriveni 12-mjesečnim jamstvom. Proizvodi koji ispunjavaju uvjete mogu se također vratiti u skladu s našom 30-dnevnom politikom povrata novca. Obratite se našem timu prije vraćanja bilo kojeg artikla kako biste potvrdili primjenjive uvjete i upute za povrat.

Products FAQs

Možda će vam se također svidjeti