Galeri media
Galeri media
Galeri media

Schneider Electric BMXAMO0410 Modicon X80 Analog Output Module

18 tersedia di stok

Manufacturer: Schneider
Product No.: BMXAMO0410
Country of origin: France
Product Type: Modicon X80 Analog Output Module
Condition: Baru Sama Sekali
Payment: T/T, Western Union
Weight: 0.15 kg
Shipping port: Xiamen
Warranty: 12 bulan

Deskripsi
Reviews
Pengiriman & Pembayaran

Configured for isolated analog signal output in the Modicon X80 platform, the Schneider Electric BMXAMO0410 (BMXAMO0410 Analog Output Module) provides four electrically isolated channels for 0-20 mA, 4-20 mA, or +/-10 V output. The module communicates with the PLC through the rack backplane and uses a 20-way connector for field wiring.

Hardware Specifications

Parameter	Specification
Model	BMXAMO0410
Brand	Schneider Electric
Series	Modicon X80
Product Type	Analog output module
Number of Outputs	4
Output Signals	0-20 mA, 4-20 mA, +/-10 V
Output Resolution	15 bits + sign
Channel Isolation	Isolated
Isolation Voltage	1400 V DC between channels and ground; 1400 V DC between channels and bus; 750 V DC between channels
Conversion Time	<= 1 ms
Minimum Crosstalk Attenuation	80 dB
Common Mode Rejection	100 dB
Measurement Error	<= 0.2% of full scale from 0 to 60 deg C; 0.1% of full scale at 25 deg C
Load Impedance	>= 1000 Ohm for +/-10 V; <= 500 Ohm for 0-20 mA and 4-20 mA
Electrical Connection	20-way connector
Supply	Internal power supply via rack
Power Consumption	3 W at 24 VDC typical; 3.6 W maximum; 0.45 W at 3.3 VDC typical; 0.51 W maximum
Current Consumption	150 mA at 3.3 VDC; 140 mA at 24 VDC
Weight	0.15 kg
Dimensions	32 x 100 x 86 mm
Operating Temp	0 to 60 deg C
Storage Temp	-40 to 85 deg C
Relative Humidity	5-95% at 55 deg C, non-condensing
Protection Rating	IP20
Operating Altitude	0 to 2000 m; 2000 to 5000 m with derating
Vibration Resistance	3 gn
Shock Resistance	30 gn
Compatible PLC Platforms	Modicon M340 and Modicon M580 local or remote I/O
Protective Treatment	Standard version
Status Indication	RUN, channel diagnostics, ERR, I/O LEDs

Analog Output Isolation and Signal Characteristics

The BMXAMO0410 provides four isolated high-level analog outputs. Each channel can be configured for current or voltage output according to the supported signal ranges. The specified isolation voltage is 1400 V DC between channels and ground and between channels and the bus.

The module provides 80 dB minimum crosstalk attenuation and 100 dB common mode rejection. Open-circuit detection is provided for 0-20 mA and 4-20 mA outputs, while short-circuit detection is specified for +/-10 V outputs. Fallback operation can be configured or predefined.

Frequently Asked Questions

Q: What output signals does the BMXAMO0410 support?
A: It supports 0-20 mA, 4-20 mA, and +/-10 V analog outputs across four channels.

Q: How is the module powered?
A: The module receives its internal power through the Modicon X80 rack backplane.

Q: Can the BMXAMO0410 be installed on both M340 and M580 systems?
A: Yes. The supplied data specifies compatibility with Modicon M340 and Modicon M580 PLCs for local or remote I/O configurations.

Field Installation Guidelines

Install the BMXAMO0410 on the specified Modicon X80 rack and secure the module with the two required mounting screws. Use the appropriate 20-way removable terminal block for field wiring.

Route analog signal conductors separately from high-current power wiring and switching conductors where practical. Maintain appropriate shielding and grounding practices for the connected analog circuits. Verify the selected current or voltage mode and the corresponding load impedance before energizing the field circuit.

Confirm rack power availability and module seating before commissioning. Check the RUN, ERR, I/O, and channel diagnostic LEDs after startup. For remote I/O installations, verify the communication path and rack configuration before applying output commands.

Pembayaran: T/T, Western Union.

Pelabuhan pengiriman: Xiamen.

Waktu produksi: Biasanya 1–3 hari kerja setelah pembayaran dikonfirmasi (tergantung ketersediaan stok).

Pengiriman ke seluruh dunia: Kami mengirimkan komponen otomasi industri kepada pelanggan di seluruh dunia. Biaya pengiriman akan dicantumkan dalam RFQ Anda.

F.A.Q.

Pertanyaan umum tentang penawaran harga, pengiriman, garansi, dan pengembalian barang

Klik Minta Penawaran di halaman produk dan kirimkan nomor komponen, jumlah yang diperlukan, serta negara tujuan kepada kami. Tim penjualan kami akan membalas dengan informasi ketersediaan terkini, harga, dan perkiraan waktu pengiriman.

Barang yang tersedia biasanya disiapkan setelah pembayaran dan konfirmasi pesanan. Sebagian besar pesanan dikirim dari gudang kami di Tiongkok, meskipun lokasi pengiriman dapat berbeda tergantung ketersediaan stok saat ini.

Ya. Kami mengirimkan suku cadang otomasi industri kepada pelanggan di seluruh dunia. Biaya pengiriman dan waktu transit bergantung pada tujuan, berat paket, ukuran produk, serta persyaratan impor setempat.

Kami biasanya menggunakan DHL, FedEx, UPS, dan layanan kurir internasional lainnya. Jasa pengiriman dapat dipilih sesuai dengan tujuan, kecepatan pengiriman, ukuran kiriman, dan kebutuhan pelanggan.

Produk kami umumnya dilindungi oleh garansi 12 bulan. Produk yang memenuhi syarat juga dapat dikembalikan berdasarkan kebijakan pengembalian dana 30 hari kami. Harap hubungi tim kami sebelum mengembalikan barang apa pun untuk mengonfirmasi ketentuan yang berlaku dan petunjuk pengembalian.