Lewati ke informasi produk
1 dari 3

Schneider Electric BMXDRA0805H Modicon X80 Discrete Output Module

18 tersedia di stok
  • Manufacturer: Schneider
  • Product No.: BMXDRA0805H
  • Country of origin: France
  • Product Type: Modicon X80 Discrete Output Module
  • Condition: Baru Sama Sekali
  • Payment: T/T, Western Union
  • Weight: 0.145 kg
  • Shipping port: Xiamen
  • Warranty: 12 bulan
  • Deskripsi
  • Reviews
  • Pengiriman & Pembayaran

The Schneider Electric BMXDRA0805H is an 8-channel normally open (NO) relay discrete output module designed for the Modicon X80 common I/O platform, supporting Modicon M580 and Modicon M340 Programmable Automation Controllers (PAC). Engineered with conformal coating and an extended operating temperature range of -25 deg C to +70 deg C, this ruggedized module switches 24 to 240 V AC and 24 V DC loads in severe industrial environments.

Output Switching and Electrical Performance

The BMXDRA0805H provides 8 normally open relay output channels configured with positive discrete output logic. It accommodates a nominal load voltage range of 24 to 240 V AC (19 to 264 V AC operating limits) and 12 to 24 V DC (10 to 34 V DC operating limits), requiring a minimum switching load of 10 mA at 5 V DC to ensure reliable contact closure.

Backplane power draw is 79 mA typical at 3.3 V DC. Output switching response times are less than 10 ms for activation and less than 8 ms for deactivation, making the module suitable for general relay control of solenoids, contactors, and pilot indicators. Channel-to-bus isolation is rated at 2000 V AC (50/60 Hz for 1 minute) with an insulation resistance exceeding 10 MOhm at 500 V DC.

Ruggedized Construction and Environmental Ratings

The "H" suffix designates the hardened version featuring conformal coating on the internal printed circuit boards. This protective treatment enables continuous operation from -25 deg C to +70 deg C and up to 95% non-condensing relative humidity at 55 deg C.

The IP20-rated housing is qualified against corrosive and particulate contaminants under standard industrial classifications:

  • Gas resistance: Class Gx and Class 3C4
  • Dust and sand resistance: Class 3S4
  • Salt mist resistance: Level 2
  • Mold growth and fungal spore resistance: Class 3B2

Lifecycle Status and Replacement

Schneider Electric discontinued the BMXDRA0805H on July 1, 2022, with end-of-service scheduled for June 30, 2030. The official direct replacement is the Schneider Electric BMXDRA0815H, which retains the 8 NO relay output form factor and conformal coating while expanding the nominal DC switching capability to 24 to 125 V DC.

Technical Specifications

Parameter Specification
Model BMXDRA0805H
Brand Schneider Electric
Product Series Modicon X80
Product Type Discrete Output Module
Compatible Controllers Modicon M580, Modicon M340
Number of Outputs 8 NO Relay Outputs
Output Logic Positive
Nominal Output Voltage 24 to 240 V AC / 12 to 24 V DC
Operating Voltage Range 19 to 264 V AC / 10 to 34 V DC
Minimum Switching Current 10 mA at 5 V DC
Backplane Current Consumption 79 mA typical at 3.3 V DC
Output Response Time < 10 ms (activation), < 8 ms (deactivation)
Dielectric Strength 2000 V AC at 50/60 Hz for 1 min
Insulation Resistance > 10 MOhm at 500 V DC
MTBF 2,119,902 hours
Protective Treatment Conformal coating
Operating Temperature -25 deg C to +70 deg C
Relative Humidity 5% to 95% at 55 deg C (without condensation)
Enclosure Protection IP20
Certifications ATEX, CE, CSA, EAC, IECEx, Merchant Navy, RCM, UL
Standards Compliance EN 61131-2, EN 61000-6-4, EN 61000-6-2, EN 61010-2-201
Net Weight 0.145 kg

Frequently Asked Questions

Q: What is the difference between the BMXDRA0805H and the standard BMXDRA0805?A: The "H" suffix indicates a hardened version with conformal coating, extending the operating temperature range to -25 deg C to +70 deg C and adding resistance to corrosive gases (Gx, 3C4), dust/sand (3S4), salt (Level 2), and mold/fungi (3B2).

Q: Can the BMXDRA0805H be replaced directly by the BMXDRA0815H?A: Yes. Schneider Electric designates the BMXDRA0815H as the official replacement for the discontinued BMXDRA0805H, offering the same 8 NO relay outputs and severe-environment coating while supporting an expanded 24 to 125 V DC load range.

Q: What is the minimum load required for reliable relay switching on the BMXDRA0805H?A: Each relay output requires a minimum switching current of 10 mA at 5 V DC to maintain proper contact reliability.

Pembayaran: T/T, Western Union.

Pelabuhan pengiriman: Xiamen.

Waktu produksi: Biasanya 1–3 hari kerja setelah pembayaran dikonfirmasi (tergantung ketersediaan stok).

Pengiriman ke seluruh dunia: Kami mengirimkan komponen otomasi industri kepada pelanggan di seluruh dunia. Biaya pengiriman akan dicantumkan dalam RFQ Anda.

F.A.Q.

Pertanyaan umum tentang penawaran harga, pengiriman, garansi, dan pengembalian barang

Klik Minta Penawaran di halaman produk dan kirimkan nomor komponen, jumlah yang diperlukan, serta negara tujuan kepada kami. Tim penjualan kami akan membalas dengan informasi ketersediaan terkini, harga, dan perkiraan waktu pengiriman.

Barang yang tersedia biasanya disiapkan setelah pembayaran dan konfirmasi pesanan. Sebagian besar pesanan dikirim dari gudang kami di Tiongkok, meskipun lokasi pengiriman dapat berbeda tergantung ketersediaan stok saat ini.

Ya. Kami mengirimkan suku cadang otomasi industri kepada pelanggan di seluruh dunia. Biaya pengiriman dan waktu transit bergantung pada tujuan, berat paket, ukuran produk, serta persyaratan impor setempat.

Kami biasanya menggunakan DHL, FedEx, UPS, dan layanan kurir internasional lainnya. Jasa pengiriman dapat dipilih sesuai dengan tujuan, kecepatan pengiriman, ukuran kiriman, dan kebutuhan pelanggan.

Produk kami umumnya dilindungi oleh garansi 12 bulan. Produk yang memenuhi syarat juga dapat dikembalikan berdasarkan kebijakan pengembalian dana 30 hari kami. Harap hubungi tim kami sebelum mengembalikan barang apa pun untuk mengonfirmasi ketentuan yang berlaku dan petunjuk pengembalian.

Products FAQs

Anda mungkin juga menyukai