
Beri tahu melalui email saat produk ini tersedia
- Deskripsi
- Reviews
- Pengiriman & Pembayaran
The Schneider Electric BMXNOM0200 is a Modicon X80 serial communication module equipped with two RS-232/RS-485 interfaces for Modbus and character-mode communication. It provides serial connectivity for Modicon M340 and M580 automation platforms, with RJ45 connections, internal rack power supply, and independent activity indicators for both serial ports.
Communication Interfaces and Protocols
The BMXNOM0200 provides two serial communication interfaces with different electrical configurations and transmission rates:
- RS-232: RJ45 connector, 115.2 kbps, 8-wire connection.
- RS-485: RJ45 connector, 57.6 kbps, one twisted-pair connection.
- Communication modes: Modbus and character mode (ASCII).
The two interfaces allow the controller to exchange data with serial field devices and equipment. RS-232 supports point-to-point serial communication, while RS-485 provides a differential signaling interface suitable for multidrop serial networks. The actual network topology and device configuration must follow the applicable communication requirements.
Modicon X80 Platform Integration
The BMXNOM0200 belongs to the Modicon X80 modular I/O and communication platform. It is compatible with Modicon M340 and M580 PLC systems, providing serial communication within these automation architectures.
The module receives its operating power internally through the rack backplane. Its current consumption is 80 mA at 24 VDC, so no separate external power connection is specified for the module itself.
Status Indication and Diagnostics
Four LEDs provide local operating and communication status:
- ERR (red): Indicates a module fault.
- RUN (green): Indicates that the module is operating.
- SER COM 0 (green): Indicates serial interface 0 activity.
- SER COM 1 (green): Indicates serial interface 1 activity.
These indicators help maintenance personnel distinguish module operating status from serial communication activity during troubleshooting.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXNOM0200 |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Serial Communication Interface Module |
| Communication Interfaces | 2 serial ports |
| Serial Interface 0 | RS-232, RJ45, 115.2 kbps, 8 wires |
| Serial Interface 1 | RS-485, RJ45, 57.6 kbps, 1 twisted pair |
| Communication Modes | Modbus, Character Mode (ASCII) |
| Power Supply | Internal power supply via module rack |
| Current Consumption | 80 mA at 24 VDC |
| Local Diagnostics | ERR, RUN, SER COM 0, SER COM 1 LEDs |
| Module Format | Standard |
| Conformal Coating | TC |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 10 to 95%, non-condensing |
| Weight | 0.23 kg |
| Certifications | CE, UL |
| Standards | UL 508, EN 61131-2, EN 61000-6-4, EN 61000-6-2, EN 61010-2-201 |
| EU Directives | 2014/35/EU, 2014/30/EU |
| EAN | 3595864024431 |
| Lifecycle Carbon Footprint | 101 kg CO2 eq. |
Installation and Environmental Conditions
The BMXNOM0200 uses the standard Modicon X80 module format and obtains power through the module rack. Its IP20 protection rating indicates that it is intended for installation inside an appropriate electrical enclosure rather than direct exposure to water or dust.
The specified operating temperature range is 0 to 60 deg C, with relative humidity between 10% and 95%, provided that condensation does not occur. The TC conformal coating designation identifies its climatic treatment configuration.
Frequently Asked Questions
Q: Which PLC platforms support the BMXNOM0200?
A: The BMXNOM0200 is specified for use with Schneider Electric Modicon M340 and M580 PLC platforms. Confirm the rack configuration and applicable platform documentation before installation.
Q: Can the two serial ports operate at different communication speeds?
A: Yes. The specified interface rates are 115.2 kbps for RS-232 and 57.6 kbps for RS-485. Each interface has its own physical connection and activity indicator.
Q: Does the BMXNOM0200 require an external 24 VDC power supply?
A: No separate external supply is specified. The module receives power internally through the rack backplane and has a stated current consumption of 80 mA at 24 VDC.
Pembayaran: T/T, Western Union.
Pelabuhan pengiriman: Xiamen.
Waktu produksi: Biasanya 1–3 hari kerja setelah pembayaran dikonfirmasi (tergantung ketersediaan stok).
Pengiriman ke seluruh dunia: Kami mengirimkan komponen otomasi industri kepada pelanggan di seluruh dunia. Biaya pengiriman akan dicantumkan dalam RFQ Anda.
F.A.Q.
Pertanyaan umum tentang penawaran harga, pengiriman, garansi, dan pengembalian barangKlik Minta Penawaran di halaman produk dan kirimkan nomor komponen, jumlah yang diperlukan, serta negara tujuan kepada kami. Tim penjualan kami akan membalas dengan informasi ketersediaan terkini, harga, dan perkiraan waktu pengiriman.
Barang yang tersedia biasanya disiapkan setelah pembayaran dan konfirmasi pesanan. Sebagian besar pesanan dikirim dari gudang kami di Tiongkok, meskipun lokasi pengiriman dapat berbeda tergantung ketersediaan stok saat ini.
Ya. Kami mengirimkan suku cadang otomasi industri kepada pelanggan di seluruh dunia. Biaya pengiriman dan waktu transit bergantung pada tujuan, berat paket, ukuran produk, serta persyaratan impor setempat.
Kami biasanya menggunakan DHL, FedEx, UPS, dan layanan kurir internasional lainnya. Jasa pengiriman dapat dipilih sesuai dengan tujuan, kecepatan pengiriman, ukuran kiriman, dan kebutuhan pelanggan.
Produk kami umumnya dilindungi oleh garansi 12 bulan. Produk yang memenuhi syarat juga dapat dikembalikan berdasarkan kebijakan pengembalian dana 30 hari kami. Harap hubungi tim kami sebelum mengembalikan barang apa pun untuk mengonfirmasi ketentuan yang berlaku dan petunjuk pengembalian.
Anda mungkin juga menyukai
Pos Blog
Berita otomasi industri, panduan teknis, dan pembaruan produk.
