
Beri tahu melalui email saat produk ini tersedia
- Deskripsi
- Reviews
- Pengiriman & Pembayaran
The BMXNOR0200H is a ruggedized RTU communication module for Schneider Electric Modicon M340 and M580 automation platforms. It supports DNP3, DNP3 IP and IEC 60870-5-101/104 protocols, enabling communication between PLC systems, remote terminal units (RTUs) and SCADA systems. Ethernet and serial interfaces provide connectivity for network-based and modem-based communication, while the conformal coating and extended operating temperature range support installation in demanding environments.
Communication Functions and Protocols
The BMXNOR0200H provides multiple communication services for remote monitoring and control applications. It supports both master and slave operation across multiple protocols within one module, allowing the controller to exchange data with remote RTU stations and forward events to a SCADA system.
Supported communication functions include:
- DNP3 and DNP3 IP.
- IEC 60870-5-101 and IEC 60870-5-104.
- Modbus/TCP messaging.
- Timestamped event management.
- Transparent forwarding of events from remote slave devices to SCADA.
- External modem management through serial, fixed-line, GSM and GPRS/3G connections.
- Automatic event backup in the event of power failure.
- CSV data logging and storage.
- Email and SMS notifications.
Ethernet and Serial Interfaces
The module provides an Ethernet RJ45 interface supporting 10BASE-T and 100BASE-TX, together with an RJ45 serial interface supporting RS232 and RS485 communication. These interfaces allow the module to connect to Ethernet-based control networks as well as serial RTU equipment.
The Ethernet interface supports web services, FTP, SMTP, NTP and SNMP functions. Additional services include BootP, DHCP and FDR client functionality. The integrated web server provides Rackviewer, a data editor and support for user-defined web pages.
Memory and Module Diagnostics
A 128 MB SD flash memory card, model BMXRWS128MWF, is included. It supports standard web server resources, user-defined web pages and CSV data logging. Stored event and process information can be used for monitoring and data retrieval.
The front-panel LEDs provide operating and communication status:
- ETH ACT and ETH LINK: Ethernet activity and link status.
- ETH STS: Ethernet network status.
- RUN: Processor operating status.
- ERR: Processor or system error.
- CARD ERR: Memory card error.
- DL: Download activity.
- SER COM: Serial communication activity.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXNOR0200H |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Ethernet/Serial RTU Communication Module |
| Application | Standard and severe environments |
| Ethernet Interface | 1 x RJ45, 10/100 Mbps |
| Ethernet Standards | 10BASE-T / 100BASE-TX |
| Serial Interface | 1 x RJ45, RS232/RS485 |
| Serial Transmission Rate | 300/38400 bit/s |
| Communication Protocols | DNP3, DNP3 IP, IEC 60870-5-101, IEC 60870-5-104, Modbus/TCP |
| Communication Modes | Multi-protocol master and slave |
| Additional Services | FTP, SMTP, NTP, SNMP, BootP, DHCP, FDR |
| Event Management | Timestamped events and automatic event backup on power loss |
| Data Logging | CSV file logging |
| Memory Card | BMXRWS128MWF SD flash card, 128000 kB |
| Power Supply | Internal supply via module rack |
| Current Consumption | 95 mA at 24 VDC |
| Local Diagnostics | 8 LEDs |
| Protective Treatment | Conformal coating |
| Module Format | Standard |
| Weight | 0.2 kg |
| Operating Temperature | -25 to 70 deg C |
| Relative Humidity | 10-95%, non-condensing |
| Protection Rating | IP20 |
| Environmental Resistance | Gas, dust, sand, salt and fungal growth resistance |
| Product Certifications | CE, UL, CSA, RCM, EAC, UKCA, ATEX Zone 2/22, IECEx Zone 2/22, Marine |
| Standards | IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No. 61010-2-201, IACS E10, IEC 61850-3 |
| EAN | 3595864105314 |
| Total Lifecycle Carbon Footprint | 120 kg CO2 eq. |
RTU Integration with SCADA Systems
The BMXNOR0200H handles communication between remote control stations and supervisory systems. In an upstream configuration, it can communicate with a SCADA system in server or slave mode. In a downstream configuration, it can operate as a master to communicate with remote field devices.
Timestamped event handling preserves the time information associated with reported changes. Transparent event routing allows events received from remote slave devices to be forwarded to the supervisory system. Automatic event backup on power loss helps retain event information during an interruption of the module's power supply.
Power and Environmental Requirements
The module receives its operating power internally through the Modicon X80 rack. Its specified current consumption is 95 mA at 24 VDC. This is a rack-supplied current requirement, not a standalone 24 VDC power input.
The conformal coating and specified environmental resistance characteristics distinguish this version from standard-environment communication hardware. Its IP20 rating still requires installation inside an appropriately protected enclosure; ruggedized environmental characteristics do not indicate a higher ingress protection rating.
Platform Compatibility and Lifecycle
The BMXNOR0200H is specified for use with Modicon M340 and Modicon M580 programmable automation controllers. It belongs to the Modicon X80 common I/O platform, which provides a shared module environment across these controller families.
Schneider Electric lists 1 December 2027 as the sales discontinuation date and 31 December 2035 as the service discontinuation date. The manufacturer also identifies BMENOR2200H as an alternative module to consider. Technical constraints, communication configuration and application requirements should be checked before selecting it as a replacement.
Frequently Asked Questions
Q: Which communication protocols does the BMXNOR0200H support?
A: It supports DNP3, DNP3 IP, IEC 60870-5-101, IEC 60870-5-104 and Modbus/TCP messaging. It also provides timestamped event management and communication services for remote modem connections.
Q: Can the BMXNOR0200H communicate through both Ethernet and serial interfaces?
A: Yes. It has one Ethernet RJ45 interface supporting 10/100 Mbps and one serial RJ45 interface supporting RS232/RS485. The serial interface supports communication at the specified 300/38400 bit/s rates.
Q: Is the BMXNOR0200H suitable for Modicon M580 applications?
A: Yes. The module is specified for both Modicon M340 and M580 platforms. The rack, processor configuration and applicable hardware and firmware requirements should be checked before installation.
Pembayaran: T/T, Western Union.
Pelabuhan pengiriman: Xiamen.
Waktu produksi: Biasanya 1–3 hari kerja setelah pembayaran dikonfirmasi (tergantung ketersediaan stok).
Pengiriman ke seluruh dunia: Kami mengirimkan komponen otomasi industri kepada pelanggan di seluruh dunia. Biaya pengiriman akan dicantumkan dalam RFQ Anda.
F.A.Q.
Pertanyaan umum tentang penawaran harga, pengiriman, garansi, dan pengembalian barangKlik Minta Penawaran di halaman produk dan kirimkan nomor komponen, jumlah yang diperlukan, serta negara tujuan kepada kami. Tim penjualan kami akan membalas dengan informasi ketersediaan terkini, harga, dan perkiraan waktu pengiriman.
Barang yang tersedia biasanya disiapkan setelah pembayaran dan konfirmasi pesanan. Sebagian besar pesanan dikirim dari gudang kami di Tiongkok, meskipun lokasi pengiriman dapat berbeda tergantung ketersediaan stok saat ini.
Ya. Kami mengirimkan suku cadang otomasi industri kepada pelanggan di seluruh dunia. Biaya pengiriman dan waktu transit bergantung pada tujuan, berat paket, ukuran produk, serta persyaratan impor setempat.
Kami biasanya menggunakan DHL, FedEx, UPS, dan layanan kurir internasional lainnya. Jasa pengiriman dapat dipilih sesuai dengan tujuan, kecepatan pengiriman, ukuran kiriman, dan kebutuhan pelanggan.
Produk kami umumnya dilindungi oleh garansi 12 bulan. Produk yang memenuhi syarat juga dapat dikembalikan berdasarkan kebijakan pengembalian dana 30 hari kami. Harap hubungi tim kami sebelum mengembalikan barang apa pun untuk mengonfirmasi ketentuan yang berlaku dan petunjuk pengembalian.
Anda mungkin juga menyukai
Pos Blog
Berita otomasi industri, panduan teknis, dan pembaruan produk.
