Lewati ke informasi produk
1 dari 3

Schneider Electric BMXP341000 Modicon M340 CPU Processor Module

18 tersedia di stok
  • Manufacturer: Schneider
  • Product No.: BMXP341000
  • Country of origin: France
  • Product Type: Modicon M340 CPU Processor Module
  • Condition: Baru Sama Sekali
  • Payment: T/T, Western Union
  • Weight: 0.2 kg
  • Shipping port: Xiamen
  • Warranty: 12 bulan
  • Deskripsi
  • Reviews
  • Pengiriman & Pembayaran

The BMXP341000 is a processor module for the Schneider Electric Modicon M340 automation platform. It executes PLC application tasks, manages local and distributed I/O processing, and supports serial Modbus and USB communications. It provides a maximum capacity of 512 discrete I/O and 128 analog I/O in multi-rack configurations, with 2,048 kB of internal memory and an 8 MB memory card for application backup.

Technical Specifications

Parameter Specification
Model BMXP341000
Brand Schneider Electric
Product Type Modicon M340 CPU Processor Module
Product Series Modicon M340
Automation Platform Modicon M340
Communication Protocol Modbus RTU/ASCII
Maximum Rack Configuration 2 racks
Discrete I/O Processor Capacity 512 I/O (multi-rack)
Analog I/O Processor Capacity 128 I/O (multi-rack); 66 I/O (single-rack)
Application-Specific Channels 20
Internal Memory 2,048 kB
Data Memory 128 kB
Program, Constants and Symbols Memory 1,792 kB
Memory Card BMXRMS008MP, 8 MB
Power Consumption 72 mA at 24 VDC
Power Supply Internal supply via module rack
Serial Interfaces Non-isolated RS232C / RS485 via RJ45
USB Interface 12 Mbit/s
Ethernet / AS-Interface Processor Capacity 2 Ethernet communication modules; 2 AS-Interface modules
Modbus Device Capacity 0-32 devices per segment
Maximum Modbus Addresses 0-248
Boolean Instruction Execution Time 0.18 us
Single-Length Word Instruction Execution Time 0.38 us
Double-Length Word Instruction Execution Time 0.26 us
Floating-Point Instruction Execution Time 1.74 us
Maximum Boolean Instruction Throughput 5.4 KInst/ms
Maximum Mixed Instruction Throughput 4.2 KInst/ms (65% Boolean and 35% fixed arithmetic)
Application Tasks 1 Master Task, 1 Fast Task, 32 Event Tasks
Operating Temperature 0 to 60 deg C
Relative Humidity 5-95%, non-condensing
Protection Rating IP20
Coating TC
Status Indicators RUN, I/O, CARD ERR, ERR, SER COM
Product Weight 0.2 kg
Certifications CE, UL, CSA, RCM, EAC, UKCA
EAN 3595863910698
Lifecycle Status Sales discontinuation: 1 December 2027; service discontinuation: 31 December 2035

CPU Processing and Memory Architecture

The BMXP341000 executes the PLC application through a Master Task, a Fast Task and up to 32 Event Tasks. The Master Task supports cyclic or periodic execution, while the Fast Task handles time-sensitive application processing. Event Tasks provide additional execution paths for event-driven control operations.

Its 2,048 kB internal memory is divided into 128 kB for data and 1,792 kB for programs, constants and symbols. The supplied BMXRMS008MP 8 MB memory card provides backup storage for programs, constants, symbols and application data. This distinction is relevant when checking application memory requirements and backup arrangements.

Communication Interfaces

The CPU provides non-isolated serial communication through RJ45 connections, supporting RS232C and RS485 physical interfaces. Modbus RTU and ASCII communication modes allow the controller to exchange data with supported field devices and supervisory equipment.

The specified serial transmission rates range from 0.3 to 19.2 kbit/s. RS232C and RS485 configurations have different wiring and duplex characteristics, so the selected physical interface, cable arrangement and communication mode must match the connected equipment.

The USB interface operates at 12 Mbit/s. The product data also specifies a processor capacity for two Ethernet communication modules and two AS-Interface modules. These figures describe communication-module capacity, not built-in Ethernet or AS-Interface ports on the CPU itself.

I/O Capacity and Rack Configuration

The processor supports up to two racks and 11 slots. Its I/O processing capacity depends on the rack arrangement: 512 discrete I/O in the single-rack configuration, 66 analog I/O in a single-rack configuration, and up to 128 analog I/O in a multi-rack configuration. These limits should be checked against the actual rack layout and installed I/O modules.

The 20 application-specific channels and programmable control loops provide additional resources for application control. Modbus diagnostic counters and event counters support communication monitoring and fault analysis.

Serial Communication and Network Expansion

The serial interface supports the following configurations:

  • RS232C character mode: full-duplex communication using two twisted, shielded pairs.
  • RS485 character mode: half-duplex communication using one twisted, shielded pair.
  • Modbus RTU/ASCII over RS232C or RS485: master/slave communication in half-duplex mode.
  • Serial transmission rate: 0.3 to 19.2 kbit/s.

The specified maximum segment length is 10 m for non-isolated serial connections and 1,000 m for isolated serial connections. The corresponding point-to-point limits are 15 m. These limits depend on the communication configuration and isolation arrangement.

The CPU supports up to two Ethernet communication modules and two AS-Interface modules. Ethernet connectivity therefore requires a separate communication module rather than relying on an integrated Ethernet port.

Diagnostics and Operating Conditions

Five front-panel LEDs indicate the processor and communication status:

  • RUN (green): processor operating status.
  • I/O (red): I/O module fault.
  • CARD ERR (red): memory card fault.
  • ERR (red): processor or system fault.
  • SER COM (yellow): Modbus serial communication activity.

The IP20 enclosure rating indicates protection against solid objects larger than 12.5 mm, with no specified water-ingress protection. The specified operating temperature is 0 to 60 deg C, and relative humidity is 5-95% without condensation.

Standards and Product Certifications

The BMXP341000 is listed with the following certifications and compliance markings:

  • CE, UL, CSA, RCM, EAC and UKCA.
  • IEC 61131-2.
  • IEC 61010-2-201 and UL 61010-2-201.
  • CSA C22.2 No. 61010-2-201.
  • IACS E10.
  • EN/IEC 61000-6-5, interface types 1 and 2.
  • EN/IEC 61850-3, location G.

The product data also identifies compliance with the applicable low-voltage, electromagnetic compatibility and WEEE directives.

Frequently Asked Questions

Q: Does the BMXP341000 have an integrated Ethernet port?

A: No. The CPU has an integrated Modbus serial interface and USB port. Ethernet communication requires a separate Ethernet communication module installed in an available Modicon M340 rack slot. The processor supports up to two Ethernet communication modules.

Q: What is the difference between the single-rack and multi-rack I/O capacities?

A: The processor supports 512 discrete I/O in a single-rack configuration and 66 analog I/O in a single-rack configuration. The analog I/O capacity increases to 128 in a multi-rack configuration. Check both limits when planning the system architecture.

Q: Which memory card is supplied with the BMXP341000?

A: The specified memory card is the BMXRMS008MP, with 8 MB capacity. It is used to back up application programs, constants, symbols and data. Verify the card reference when checking replacement or maintenance requirements.

Pembayaran: T/T, Western Union.

Pelabuhan pengiriman: Xiamen.

Waktu produksi: Biasanya 1–3 hari kerja setelah pembayaran dikonfirmasi (tergantung ketersediaan stok).

Pengiriman ke seluruh dunia: Kami mengirimkan komponen otomasi industri kepada pelanggan di seluruh dunia. Biaya pengiriman akan dicantumkan dalam RFQ Anda.

F.A.Q.

Pertanyaan umum tentang penawaran harga, pengiriman, garansi, dan pengembalian barang

Klik Minta Penawaran di halaman produk dan kirimkan nomor komponen, jumlah yang diperlukan, serta negara tujuan kepada kami. Tim penjualan kami akan membalas dengan informasi ketersediaan terkini, harga, dan perkiraan waktu pengiriman.

Barang yang tersedia biasanya disiapkan setelah pembayaran dan konfirmasi pesanan. Sebagian besar pesanan dikirim dari gudang kami di Tiongkok, meskipun lokasi pengiriman dapat berbeda tergantung ketersediaan stok saat ini.

Ya. Kami mengirimkan suku cadang otomasi industri kepada pelanggan di seluruh dunia. Biaya pengiriman dan waktu transit bergantung pada tujuan, berat paket, ukuran produk, serta persyaratan impor setempat.

Kami biasanya menggunakan DHL, FedEx, UPS, dan layanan kurir internasional lainnya. Jasa pengiriman dapat dipilih sesuai dengan tujuan, kecepatan pengiriman, ukuran kiriman, dan kebutuhan pelanggan.

Produk kami umumnya dilindungi oleh garansi 12 bulan. Produk yang memenuhi syarat juga dapat dikembalikan berdasarkan kebijakan pengembalian dana 30 hari kami. Harap hubungi tim kami sebelum mengembalikan barang apa pun untuk mengonfirmasi ketentuan yang berlaku dan petunjuk pengembalian.

Products FAQs

Anda mungkin juga menyukai