Vai alle informazioni sul prodotto
1 di 3

Schneider BMXCPS2010 Modicon X80 Power Supply Module

18 disponibili
  • Manufacturer: Schneider
  • Product No.: BMXCPS2010
  • Country of origin: France
  • Product Type: Modicon X80 Power Supply Module
  • Condition: Completamente nuovo
  • Payment: Bonifico telegrafico, Western Union
  • Weight: 0.29 kg
  • Shipping port: Xiamen
  • Warranty: 12 mesi
  • Descrizione
  • Reviews
  • Spedizione e pagamento

The Schneider BMXCPS2010 is an isolated 24 VDC power supply module for the Modicon X80 platform, providing power to the I/O modules and processor through the rack backplane. It delivers 16.8 W at 24 VDC and 8.3 W at 3.3 VDC for the I/O logic supply. The module includes secondary-circuit overload, overvoltage and short-circuit protection, along with a rack voltage status LED and a RESET button for cold restart.

Power Supply Function

The BMXCPS2010 converts an external isolated 24 VDC input into the secondary supply rails required by the Modicon X80 rack. Its outputs serve different functions: the 24 VDC rail supplies the I/O modules and processor, while the 3.3 VDC rail supplies I/O module logic.

The module provides 0.7 A at 24 VDC and 2.5 A at 3.3 VDC. These separate output ratings should be considered when checking the total power requirements of the installed rack configuration.

Protection and Status Indication

The secondary circuits include overload, overvoltage and short-circuit protection for the 24 VDC sensor supply. The primary-circuit internal fuse is not accessible. A green LED indicates that rack voltage is OK, allowing maintenance personnel to check the power supply status locally.

A RESET button provides a cold-start reset function. The module also has a two-pin alarm relay connector for the alarm circuit.

Electrical Connections and Installation

The module uses a five-pin connector for the supply input, protective earth and 24 VDC input sensor connection. It must be installed in a compatible module rack and secured with two screws.

The specified maximum cable distances depend on the copper conductor cross-section:

  • 20 m with 1.5 mm2 copper power supply cable.
  • 30 m with 2.5 mm2 copper power supply cable.

The specified power interruption immunity is 1 ms. Primary-to-earth and primary-to-secondary insulation resistance are both at least 10 MOhm.

Parameter Specifications

Parameter Specification
Model BMXCPS2010
Brand Schneider Electric
Product Type Modicon X80 Power Supply Module
Series Modicon X80
Primary Voltage 24 VDC, isolated
Primary Voltage Range 18-31.2 VDC
Input Current 1 A at 24 VDC
Inrush Current 30 A at 24 VDC
Secondary Power 16.8 W at 24 VDC; 8.3 W at 3.3 VDC
Secondary Current 0.7 A at 24 VDC; 2.5 A at 3.3 VDC
Maximum Power Dissipation 8.5 W
Power Interruption Immunity 1 ms
Protection Secondary overload, overvoltage and short-circuit protection
Status Indicator 1 green LED, rack voltage OK
Reset Function Cold-start RESET button
Electrical Connections 2-pin alarm relay connector; 5-pin power supply connector
Maximum Cable Distance 20 m with 1.5 mm2 copper cable; 30 m with 2.5 mm2 copper cable
Insulation Resistance At least 10 MOhm, primary/earth and primary/secondary
Dielectric Strength 1500 V, primary/earth and primary/secondary
Protection Rating IP20
Operating Temperature 0 to 60 deg C
Storage Temperature -40 to 85 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Coating TC
Operating Altitude 0-2000 m; derating required from 2000 to 5000 m
Vibration Resistance 3 Gn
Shock Resistance 30 gn
MTBF 4,886,000 h
Weight 0.29 kg
EAN 3595863909005
Total Lifecycle Carbon Footprint 456 kg CO2 eq.

Backplane Compatibility

The BMXCPS2010 is designed for Modicon X80 module racks used in Modicon M340 and Modicon M580 automation architectures. However, it is explicitly listed as not compatible with BMEXBP..02 backplanes. Rack selection should therefore be checked against the exact backplane reference before installation.

The module is specified for IP20 protection and compliance with EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201. Listed approvals include CE, RCM, Merchant Navy, CSA, EAC and UL.

Frequently Asked Questions

Q: Can the BMXCPS2010 operate with a 24 VDC input below 24 V?

A: Yes. Its specified primary voltage range is 18-31.2 VDC. The input supply should remain within this range under normal operating and load conditions.

Q: Is the BMXCPS2010 compatible with all Modicon X80 backplanes?

A: No. Although it is specified for Modicon X80 racks, it is explicitly excluded from BMEXBP..02 backplanes. Check the exact rack reference before selecting this power supply.

Q: What is the difference between the 24 VDC and 3.3 VDC outputs?

A: The 24 VDC output supplies the I/O modules and processor, while the 3.3 VDC output supplies I/O module logic. Both output power ratings must be considered when checking the rack power budget.

Pagamento: T/T, Western Union.

Porto di spedizione: Xiamen.

Tempi di consegna: In genere 1–3 giorni lavorativi dopo la conferma del pagamento (in base alla disponibilità).

Consegna in tutto il mondo: Spediamo componenti per l’automazione industriale a clienti di tutto il mondo. Il costo del trasporto viene indicato nel preventivo relativo alla vostra richiesta.

Domande frequenti (FAQ)

Domande frequenti su preventivi, spedizione, garanzia e resi

Fai clic su Richiedi un preventivo nella pagina del prodotto e inviaci il codice prodotto, la quantità richiesta e il Paese di destinazione. Il nostro team commerciale ti risponderà indicando la disponibilità attuale, il prezzo e i tempi di consegna stimati.

Gli articoli disponibili vengono normalmente preparati dopo il pagamento e la conferma dell’ordine. La maggior parte degli ordini viene spedita dal nostro magazzino in Cina, anche se il luogo di spedizione può variare in base alle scorte disponibili.

Sì. Spediamo componenti per l’automazione industriale a clienti in tutto il mondo. Il costo e i tempi di spedizione dipendono dalla destinazione, dal peso del pacco, dalle dimensioni del prodotto e dai requisiti locali per l’importazione.

Utilizziamo comunemente i servizi di corriere internazionali DHL, FedEx, UPS e altri. Il corriere può essere scelto in base alla destinazione, alla velocità di consegna, alle dimensioni della spedizione e alle esigenze del cliente.

I nostri prodotti sono generalmente coperti da una garanzia di 12 mesi. I prodotti idonei possono inoltre essere restituiti ai sensi della nostra politica di rimborso entro 30 giorni. Contatta il nostro team prima di restituire qualsiasi articolo per confermare i termini applicabili e le istruzioni per la restituzione.

Products FAQs

Potrebbe piacerti anche