Vai alle informazioni sul prodotto
1 di 3

Schneider BMXCPS4002H Modicon X80 Redundant Power Supply Module

18 disponibili
  • Manufacturer: Schneider
  • Product No.: BMXCPS4002H
  • Country of origin: France
  • Product Type: Modicon X80 Redundant Power Supply Module
  • Condition: Completamente nuovo
  • Payment: Bonifico telegrafico, Western Union
  • Weight: 0.51 kg
  • Shipping port: Xiamen
  • Warranty: 12 mesi
  • Descrizione
  • Reviews
  • Spedizione e pagamento

The Schneider BMXCPS4002H is a ruggedized power supply module in the Modicon X80 range, designed for redundant power architectures in industrial control systems. It accepts a 100-240 V AC primary supply and provides separate 3.3 V DC and 24 V DC outputs for I/O module logic and module or processor power. Its extended operating temperature range of -25 to 70 deg C supports installations exposed to demanding environmental conditions.

Power Supply Architecture and Output Capacity

The BMXCPS4002H provides two secondary power outputs for the Modicon X80 backplane:

  • 3.3 V DC: 5.5 A, with an output power of 18 W for I/O module logic.
  • 24 V DC: 1.67 A, with an output power of 40 W for I/O module power and processor supply, with the 3.3 V output unloaded.

These outputs serve different power requirements within the control rack. The available output capacity must be considered when calculating the total power demand of installed modules, particularly when the 24 V DC output and processor supply are used together.

The module supports redundant power architectures and includes redundancy monitoring. Its diagnostic functions include remaining operating life information, temperature monitoring, redundancy testing and operating-time information, with extended diagnostics available over the network.

Input Protection and Electrical Characteristics

The primary input accepts a nominal voltage range of 100-240 V AC, with an allowable input range of 85-264 V AC. It operates at 50/60 Hz, with an acceptable frequency range of 47-63 Hz.

The secondary circuits include overload, overvoltage and short-circuit protection. The primary circuit also has internal protection that is not accessible to the user. These protection functions address different fault conditions on the input and output sides of the power supply.

The module has a maximum power dissipation of 8.5 W. Its inrush current reaches 30 A at 120 V and 60 A at 240 V, which should be considered when evaluating upstream circuit protection and power distribution.

Connections, Indicators and Reset

The BMXCPS4002H uses separate removable terminal blocks for power input and alarm relay connections:

  • One 5-pin connector for AC power supply and protective earth.
  • One 2-pin connector for the alarm relay.
  • Two removable cage-type terminal blocks, with 5-way and 2-way configurations, included with the module.

Three green LEDs indicate voltage availability, redundancy status and power supply status. A RESET button provides a cold-start function.

The primary-to-ground and primary-to-secondary insulation resistance is at least 100 MOhm. The specified interruption immunity is 1 ms, and the insulation withstand voltage varies according to the relevant circuit pair.

Installation and Environmental Conditions

The power supply is designed for installation in a Modicon X80 module rack and is secured with two screws. Its IP20 protection rating applies to the specified enclosure protection level and does not indicate suitability for direct exposure to water or dust.

The ruggedized construction includes a protective coating and environmental resistance characteristics:

  • Operating temperature: -25 to 70 deg C.
  • Storage temperature: -40 to 85 deg C.
  • Relative humidity: 5-95% at 55 deg C, without condensation.
  • Operating altitude: 0-2,000 m; derating applies from 2,000 to 5,000 m.
  • Vibration resistance: 3 Gn.
  • Shock resistance: 30 Gn.
  • Gas resistance: Class Gx according to ISA S71.04 and Class 3C4 according to IEC 60721-3-3.
  • Dust and sand resistance: Class 3S4 according to IEC 60721-3-3.

The specified environmental characteristics make this version suitable for installations requiring a wider operating temperature range and additional environmental resistance compared with standard indoor power supply configurations.

Technical Specifications

Parameter Specification
Model BMXCPS4002H
Brand Schneider Electric
Product Type Modicon X80 Power Supply Module
Product Range Modicon X80
Application Ruggedized power supply for redundant architectures
Backplane Compatibility All module racks
Primary Supply Voltage 100-240 V AC
Allowable Input Voltage 85-264 V AC
Supply Frequency 50/60 Hz
Frequency Limits 47-63 Hz
Apparent Power 0.13 kVA
Input Current 0.55 A at 240 V; 1.01 A at 115 V
Inrush Current 30 A at 120 V; 60 A at 240 V
3.3 V DC Output 5.5 A, 18 W
24 V DC Output 1.67 A, 40 W
Maximum Power Dissipation 8.5 W
Protection Secondary overload, overvoltage and short-circuit protection
Redundancy Redundant power architecture support
Diagnostics Network diagnostics, temperature monitoring and redundancy testing
Status Indicators 3 green LEDs
Reset Cold-start RESET button
Electrical Connections 1 x 5-pin power connector; 1 x 2-pin alarm relay connector
Insulation Resistance At least 100 MOhm
Dielectric Strength 1,500 V primary/secondary; 1,500 V primary/earth; 2,300 V sensor supply circuit
MTBF 792,000 h
Interruption Immunity 1 ms
Mounting Modicon X80 module rack, secured with 2 screws
Protection Rating IP20
Operating Temperature -25 to 70 deg C
Storage Temperature -40 to 85 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Vibration Resistance 3 Gn
Shock Resistance 30 Gn
Protective Coating Conformal protective coating
Operating Altitude 0-2,000 m; derating from 2,000 to 5,000 m
Hazardous Area Classification Class I, Division 2
Product Certifications Listed CE, UL, CSA, RCM, EAC, Merchant Navy
Standards IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No. 61010-2-201, IACS E10, EN/IEC 61000-6-5, EN/IEC 61850-3
Weight 0.51 kg
EAN 3606480927577
Environmental Carbon Footprint 495 kg CO2 eq.

Frequently Asked Questions

Q: What is the difference between BMXCPS4002H and a standard Modicon X80 power supply?

A: The BMXCPS4002H is the ruggedized version intended for demanding environmental conditions and redundant power architectures. Its specified operating temperature range is -25 to 70 deg C, and it includes environmental resistance characteristics for industrial installations.

Q: Can the BMXCPS4002H supply both the I/O logic and processor power?

A: Yes. It provides separate 3.3 V DC and 24 V DC outputs. The 3.3 V output supplies I/O module logic, while the 24 V output supplies I/O modules and the processor. The specified 40 W capacity at 24 V DC assumes the 3.3 V output is unloaded.

Q: What connections are provided for the power supply and alarm relay?

A: The module has a 5-pin connector for the AC supply and protective earth, together with a 2-pin connector for the alarm relay. Both removable cage-type terminal blocks are included with the power supply.

Pagamento: T/T, Western Union.

Porto di spedizione: Xiamen.

Tempi di consegna: In genere 1–3 giorni lavorativi dopo la conferma del pagamento (in base alla disponibilità).

Consegna in tutto il mondo: Spediamo componenti per l’automazione industriale a clienti di tutto il mondo. Il costo del trasporto viene indicato nel preventivo relativo alla vostra richiesta.

Domande frequenti (FAQ)

Domande frequenti su preventivi, spedizione, garanzia e resi

Fai clic su Richiedi un preventivo nella pagina del prodotto e inviaci il codice prodotto, la quantità richiesta e il Paese di destinazione. Il nostro team commerciale ti risponderà indicando la disponibilità attuale, il prezzo e i tempi di consegna stimati.

Gli articoli disponibili vengono normalmente preparati dopo il pagamento e la conferma dell’ordine. La maggior parte degli ordini viene spedita dal nostro magazzino in Cina, anche se il luogo di spedizione può variare in base alle scorte disponibili.

Sì. Spediamo componenti per l’automazione industriale a clienti in tutto il mondo. Il costo e i tempi di spedizione dipendono dalla destinazione, dal peso del pacco, dalle dimensioni del prodotto e dai requisiti locali per l’importazione.

Utilizziamo comunemente i servizi di corriere internazionali DHL, FedEx, UPS e altri. Il corriere può essere scelto in base alla destinazione, alla velocità di consegna, alle dimensioni della spedizione e alle esigenze del cliente.

I nostri prodotti sono generalmente coperti da una garanzia di 12 mesi. I prodotti idonei possono inoltre essere restituiti ai sensi della nostra politica di rimborso entro 30 giorni. Contatta il nostro team prima di restituire qualsiasi articolo per confermare i termini applicabili e le istruzioni per la restituzione.

Products FAQs

Potrebbe piacerti anche