
Riceverai una notifica via e-mail quando questo prodotto sarà disponibile
- Descrizione
- Reviews
- Spedizione e pagamento
The Schneider Electric BMXDDM16025H is a Modicon X80 discrete I/O module with 8 DC inputs and 8 relay outputs. It combines 24 VDC input signal monitoring with relay-based output switching in a single module. Its conformal coating and severe-environment classification distinguish this version from standard-treatment configurations.
Input and Output Configuration
The module provides two different signal interfaces within one I/O unit:
- 8 discrete inputs: 24 VDC positive logic, current-sinking input type.
- 8 relay outputs: Isolated relay contacts for switching DC or AC loads.
- Input current: 3.5 mA per channel.
- Input impedance: 6,800 Ohm.
- Input channels cannot be connected in parallel.
The inputs receive signals from field sensors, while the relay outputs switch external loads through their respective output circuits. This arrangement allows the controller to monitor discrete field states and operate relay-controlled devices using the same module.
Input Signal Characteristics
The 24 VDC inputs support 2-wire and 3-wire proximity sensors conforming to IEC 60947-5-2 and IEC 61131-2 Type 3 requirements. The guaranteed input thresholds are:
- Logic state 1: At least 11 V and 2 mA.
- Logic state 0: Maximum 5 V and 1.5 mA.
- Typical response time: 4 ms.
- Maximum response time: 7 ms.
These thresholds define the signal levels required for reliable input-state recognition. The module also provides reverse-polarity protection on the input side.
Relay Output Characteristics
The eight relay outputs support both DC and AC switching applications.
- DC operating voltage: 19-30 VDC.
- AC operating voltage: 19-264 VAC.
- Maximum output current: 2 A.
- Output activation response:
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDM16025H |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Discrete I/O Module |
| Application | Severe environments |
| Discrete Inputs | 8 |
| Input Voltage | 24 VDC |
| Input Type | Current sink, positive logic |
| Input Current | 3.5 mA |
| Input Impedance | 6,800 Ohm |
| Discrete Outputs | 8 |
| Output Type | Relay |
| DC Output Voltage | 19-30 VDC |
| AC Output Voltage | 19-264 VAC |
| Maximum Output Current | 2 A |
| Typical Input Response Time | 4 ms |
| Maximum Input Response Time | 7 ms |
| Output Activation Time | 10 MOhm at 500 VDC |
| Dielectric Strength | 1,500 VAC, primary/secondary; 2,830 VAC, output relay; 500 VDC, between I/O groups |
| External Input Fuse | 0.5 A fast-blow per input group |
| Output Protection | External fast-blow fuse per output channel or group |
| Protective Treatment | Conformal coating |
| Operating Temperature | -25 to 70 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Environmental Protection | IP20 |
| Gas Resistance | Gx, 3C4 |
| Dust and Sand Resistance | 3S4 |
| Salt Resistance | Level 2 |
| Mold and Fungal Spore Resistance | 3B2 |
| Net Weight | 0.135 kg |
| Package Dimensions | 12.0 x 11.0 x 5.5 cm |
| Package Weight | 168 g |
| Lifecycle Carbon Footprint | 35 kg CO2 eq. |
Frequently Asked Questions
Q: What is the difference between BMXDDM16025H and BMXDDM16025?
A: Both models provide 8 x 24 VDC positive logic inputs and 8 relay outputs. The BMXDDM16025H is the hardened version, featuring conformal coating and an extended operating temperature range of -25 to 70 deg C.
Q: Can the relay outputs switch both AC and DC loads?
A: Yes. The relay outputs support 19-30 VDC and 19-264 VAC operating ranges, with a maximum output current of 2 A. The connected load must remain within the applicable voltage and current ratings.
Q: Can the eight input channels be connected in parallel?
A: No. Input paralleling is not permitted. Each input channel should receive its own correctly wired field signal.
Pagamento: T/T, Western Union.
Porto di spedizione: Xiamen.
Tempi di consegna: In genere 1–3 giorni lavorativi dopo la conferma del pagamento (in base alla disponibilità).
Consegna in tutto il mondo: Spediamo componenti per l’automazione industriale a clienti di tutto il mondo. Il costo del trasporto viene indicato nel preventivo relativo alla vostra richiesta.
Domande frequenti (FAQ)
Domande frequenti su preventivi, spedizione, garanzia e resiFai clic su Richiedi un preventivo nella pagina del prodotto e inviaci il codice prodotto, la quantità richiesta e il Paese di destinazione. Il nostro team commerciale ti risponderà indicando la disponibilità attuale, il prezzo e i tempi di consegna stimati.
Gli articoli disponibili vengono normalmente preparati dopo il pagamento e la conferma dell’ordine. La maggior parte degli ordini viene spedita dal nostro magazzino in Cina, anche se il luogo di spedizione può variare in base alle scorte disponibili.
Sì. Spediamo componenti per l’automazione industriale a clienti in tutto il mondo. Il costo e i tempi di spedizione dipendono dalla destinazione, dal peso del pacco, dalle dimensioni del prodotto e dai requisiti locali per l’importazione.
Utilizziamo comunemente i servizi di corriere internazionali DHL, FedEx, UPS e altri. Il corriere può essere scelto in base alla destinazione, alla velocità di consegna, alle dimensioni della spedizione e alle esigenze del cliente.
I nostri prodotti sono generalmente coperti da una garanzia di 12 mesi. I prodotti idonei possono inoltre essere restituiti ai sensi della nostra politica di rimborso entro 30 giorni. Contatta il nostro team prima di restituire qualsiasi articolo per confermare i termini applicabili e le istruzioni per la restituzione.
Potrebbe piacerti anche
Articoli del blog
Notizie sull’automazione industriale, guide tecniche e aggiornamenti sui prodotti.
