
Riceverai una notifica via e-mail quando questo prodotto sarà disponibile
- Descrizione
- Reviews
- Spedizione e pagamento
The BMXDRA0815 is an 8-channel discrete relay output module in the Schneider Electric Modicon X80 range. It provides eight electrically isolated normally open (NO) relay outputs for switching AC or DC loads. The module supports rated load voltages of 24-240 V AC and 24-125 V DC, with positive output logic and a standard protective coating. It is designed for Modicon M340 and M580 automation platforms.
Output Configuration and Operation
The BMXDRA0815 uses electromechanical relay contacts to switch external loads. Each of its eight output channels operates as a normally open contact, closing when the corresponding output command is activated and opening when the command is removed.
The relay contacts support both AC and DC switching. Unlike transistor output modules, relay outputs can switch different voltage types without requiring the external load to use the same voltage as the PLC's internal logic supply. The eight outputs are electrically isolated, allowing separate load circuits within the limits of the module's electrical ratings.
Switching Characteristics and Load Protection
The module has an activation response time of 10 ms or less and a deactivation response time of 13 ms or less. These characteristics should be considered when selecting the module for applications involving frequent switching or time-sensitive output sequences.
The permissible switching load depends on voltage, load type, ambient temperature and electrical operating conditions. Inductive loads require particular attention because switching can generate voltage transients across relay contacts.
- AC inductive loads require an appropriately rated RC circuit or ZNO-type surge limiter across each output channel.
- DC inductive loads require a discharge diode on each output channel.
- External fast-blow fuses are required for short-circuit and overload protection.
The minimum switching load is also relevant when controlling low-current signals. Contact operation should be checked against the manufacturer's specified minimum load rather than assuming that the rated voltage range guarantees reliable switching at every current level.
Modicon X80 Platform Integration
The BMXDRA0815 belongs to the Modicon X80 common I/O architecture, which provides a shared hardware environment for Modicon M340 and M580 PLC systems. It can be used in local or remote I/O configurations, subject to the selected PLC architecture and rack arrangement.
The module is installed in an appropriate X80 module rack and secured using two mounting screws. Its field connections use a compatible 20-pin connection arrangement, with cage-clamp, screw-clamp or removable spring-type terminal block options.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDRA0815 |
| Brand | Schneider Electric |
| Product Series | Modicon X80 |
| Product Type | Discrete Relay Output Module |
| Number of Outputs | 8 |
| Output Type | Electromechanical Relay |
| Contact Configuration | 8 Normally Open (NO) |
| Output Isolation | Electrically isolated channels |
| Discrete Output Logic | Positive |
| Rated AC Voltage | 24-240 V AC |
| Rated DC Voltage | 24-125 V DC |
| Minimum Switching Load | 5 V DC / 10 mA |
| Output Activation Time | 10 MOhm at 500 V DC |
| Dielectric Strength | 1780 V AC at 50/60 Hz for 1 min |
| MTBF | 3,200,000 h (product specification) |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 5-95% at 60 deg C, non-condensing |
| Protection Rating | IP20 |
| Protective Coating | Standard version |
| Product Weight | 0.169 kg |
| EAN | 3606481275608 |
| Lifecycle Carbon Footprint | 157 kg CO2 eq. |
Frequently Asked Questions
Q: How many relay outputs does the BMXDRA0815 provide?
A: It provides eight electrically isolated normally open relay outputs. Each channel can switch an external AC or DC load within its specified electrical switching limits.
Q: Can the BMXDRA0815 switch both AC and DC loads?
A: Yes. Its rated voltage ranges are 24-240 V AC and 24-125 V DC. However, permissible switching power and current depend on the load type and operating conditions. Inductive loads require appropriate external suppression components.
Q: Is the BMXDRA0815 compatible with Modicon M340 and M580 PLC systems?
A: Yes. It belongs to the Modicon X80 I/O family and is specified for Modicon M340 and M580 local or remote I/O configurations. The selected rack, connection block and system architecture must support the module.
Pagamento: T/T, Western Union.
Porto di spedizione: Xiamen.
Tempi di consegna: In genere 1–3 giorni lavorativi dopo la conferma del pagamento (in base alla disponibilità).
Consegna in tutto il mondo: Spediamo componenti per l’automazione industriale a clienti di tutto il mondo. Il costo del trasporto viene indicato nel preventivo relativo alla vostra richiesta.
Domande frequenti (FAQ)
Domande frequenti su preventivi, spedizione, garanzia e resiFai clic su Richiedi un preventivo nella pagina del prodotto e inviaci il codice prodotto, la quantità richiesta e il Paese di destinazione. Il nostro team commerciale ti risponderà indicando la disponibilità attuale, il prezzo e i tempi di consegna stimati.
Gli articoli disponibili vengono normalmente preparati dopo il pagamento e la conferma dell’ordine. La maggior parte degli ordini viene spedita dal nostro magazzino in Cina, anche se il luogo di spedizione può variare in base alle scorte disponibili.
Sì. Spediamo componenti per l’automazione industriale a clienti in tutto il mondo. Il costo e i tempi di spedizione dipendono dalla destinazione, dal peso del pacco, dalle dimensioni del prodotto e dai requisiti locali per l’importazione.
Utilizziamo comunemente i servizi di corriere internazionali DHL, FedEx, UPS e altri. Il corriere può essere scelto in base alla destinazione, alla velocità di consegna, alle dimensioni della spedizione e alle esigenze del cliente.
I nostri prodotti sono generalmente coperti da una garanzia di 12 mesi. I prodotti idonei possono inoltre essere restituiti ai sensi della nostra politica di rimborso entro 30 giorni. Contatta il nostro team prima di restituire qualsiasi articolo per confermare i termini applicabili e le istruzioni per la restituzione.
Potrebbe piacerti anche
Articoli del blog
Notizie sull’automazione industriale, guide tecniche e aggiornamenti sui prodotti.
