
Riceverai una notifica via e-mail quando questo prodotto sarà disponibile
- Descrizione
- Reviews
- Spedizione e pagamento
The Schneider Electric BMXDRC0805 is an 8-channel relay discrete output module in the Modicon X80 range. It provides isolated relay contacts with normally open (NO) and normally closed (NC) configurations for switching AC and DC loads. Its output voltage range covers 24 to 240 VAC and 24 to 125 VDC, making it suitable for integration into Modicon M340 and M580 local or remote I/O architectures.
Output Configuration and Operation
The BMXDRC0805 uses electromechanical relay outputs to switch external loads according to commands from the PLC. Its 8 isolated relay outputs provide complementary NO and NC contacts, allowing the output circuit to be configured according to the requirements of the connected equipment.
The module supports positive or negative output logic. The minimum switching current is 10 mA at 5 VDC. The specified response times are no more than 10 ms for activation and 13 ms for deactivation, which should be considered when evaluating output timing in the control sequence.
Electrical Characteristics and Protection
The output circuits support switching voltages from 24 to 240 VAC or 24 to 125 VDC. The actual load current capacity is not specified in the supplied data, so the connected load must be checked against the manufacturer's output current ratings before installation.
The module specifies external short-circuit, overload and inductive-load overvoltage protection requirements. Its insulation resistance is greater than 10 MOhm at 500 VDC, and its dielectric strength is 1780 VAC at 50/60 Hz for 1 minute.
PLC Integration and Installation
The BMXDRC0805 belongs to the Modicon X80 common I/O platform, which supports Modicon M340 and M580 PLC architectures, including local and remote I/O configurations. It is installed on the PLC rack and secured with two screws.
Electrical connections use a 40-way removable terminal block. Supported terminal block types include caged, screw-clamp and spring connections. The terminal block must be selected separately according to the required wiring arrangement.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDRC0805 |
| Brand | Schneider Electric |
| Product Type | Relay Discrete Output Module |
| Product Range | Modicon X80 |
| Number of Outputs | 8 |
| Output Type | Isolated relay outputs |
| Contact Configuration | NO / NC, complementary |
| Discrete Output Logic | Positive or negative |
| Output Switching Voltage | 24-240 VAC / 24-125 VDC |
| Minimum Switching Current | 10 mA at 5 VDC |
| Output Activation Time | 10 MOhm at 500 VDC |
| Dielectric Strength | 1780 VAC, 50/60 Hz, 1 min |
| Protection Requirements | External short-circuit, overload and inductive-load overvoltage protection |
| Mounting | Modicon X80 rack, secured with 2 screws |
| Connection | 40-way removable terminal block |
| Terminal Block Types | Caged, screw-clamp or spring |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 5-95%, non-condensing |
| Dimensions (W x D x H) | 32 x 100 x 86 mm |
| Net Weight | 0.189 kg |
| Certifications | CE, UL, CSA, RCM, EAC, UKCA, Merchant Navy |
| Standards | EN 61000-6-5, EN 61850-3, EN 61131-2 |
| Country of Origin | USA |
| GTIN | 3606489485061 |
Frequently Asked Questions
Q: Which PLC platforms support the BMXDRC0805?
A: The BMXDRC0805 is designed for Modicon M340 and Modicon M580 PLC architectures. It supports both local and remote I/O configurations within the Modicon X80 platform.
Q: What terminal block is required for the BMXDRC0805?
A: The module uses a 40-way removable terminal block. Caged, screw-clamp and spring-type connections are specified as supported options. The appropriate terminal block must be selected for the installation.
Q: Can the BMXDRC0805 switch both AC and DC loads?
A: Yes. Its relay outputs support 24-240 VAC and 24-125 VDC switching voltages. However, the load current rating must also be checked against the manufacturer's specifications before connecting field devices.
Pagamento: T/T, Western Union.
Porto di spedizione: Xiamen.
Tempi di consegna: In genere 1–3 giorni lavorativi dopo la conferma del pagamento (in base alla disponibilità).
Consegna in tutto il mondo: Spediamo componenti per l’automazione industriale a clienti di tutto il mondo. Il costo del trasporto viene indicato nel preventivo relativo alla vostra richiesta.
Domande frequenti (FAQ)
Domande frequenti su preventivi, spedizione, garanzia e resiFai clic su Richiedi un preventivo nella pagina del prodotto e inviaci il codice prodotto, la quantità richiesta e il Paese di destinazione. Il nostro team commerciale ti risponderà indicando la disponibilità attuale, il prezzo e i tempi di consegna stimati.
Gli articoli disponibili vengono normalmente preparati dopo il pagamento e la conferma dell’ordine. La maggior parte degli ordini viene spedita dal nostro magazzino in Cina, anche se il luogo di spedizione può variare in base alle scorte disponibili.
Sì. Spediamo componenti per l’automazione industriale a clienti in tutto il mondo. Il costo e i tempi di spedizione dipendono dalla destinazione, dal peso del pacco, dalle dimensioni del prodotto e dai requisiti locali per l’importazione.
Utilizziamo comunemente i servizi di corriere internazionali DHL, FedEx, UPS e altri. Il corriere può essere scelto in base alla destinazione, alla velocità di consegna, alle dimensioni della spedizione e alle esigenze del cliente.
I nostri prodotti sono generalmente coperti da una garanzia di 12 mesi. I prodotti idonei possono inoltre essere restituiti ai sensi della nostra politica di rimborso entro 30 giorni. Contatta il nostro team prima di restituire qualsiasi articolo per confermare i termini applicabili e le istruzioni per la restituzione.
Potrebbe piacerti anche
Articoli del blog
Notizie sull’automazione industriale, guide tecniche e aggiornamenti sui prodotti.
