Vai alle informazioni sul prodotto
1 di 3

Schneider BMXEHC0800H Modicon X80 High-Speed Counter Module

18 disponibili
  • Manufacturer: Schneider
  • Product No.: BMXEHC0800H
  • Country of origin: France
  • Product Type: Modicon X80 High-Speed Counter Module
  • Condition: Completamente nuovo
  • Payment: Bonifico telegrafico, Western Union
  • Weight: 0.113 kg
  • Shipping port: Xiamen
  • Warranty: 12 mesi
  • Descrizione
  • Reviews
  • Spedizione e pagamento

The Schneider BMXEHC0800H is an 8-channel high-speed counter module in the Modicon X80 I/O family, designed for counting and frequency measurement in industrial automation systems. It supports counting frequencies up to 10 kHz and accepts signals from 19.2-30 V DC two-wire or three-wire proximity sensors and 10-30 V DC push-pull incremental encoders. Its extended operating temperature range is -25 to 70 deg C.

Counting Functions and Signal Processing

The BMXEHC0800H processes high-speed input signals for counting and measurement tasks. Its supported functions include:

  • Up/down counting
  • 32-bit up-counting
  • Down-counting
  • Modulo counting
  • Frequency measurement
  • Counting event detection

The module supports 8 high-speed channels, with 2 inputs in single-mode operation or 3 inputs in a specific two-phase operating mode. The maximum counting frequency is 10 kHz, making it suitable for applications that require pulse counting and incremental position or speed-related signal processing.

Input Compatibility and Electrical Characteristics

The module accepts signals from 19.2-30 V DC two-wire and three-wire proximity sensors, as well as incremental encoders with 10-30 V DC push-pull outputs. The guaranteed logic thresholds define the valid input states: 11-30 V DC for logic 1 and 5 V DC for logic 0.

The 4.5 mA input current and 5 ms cycle time are relevant when evaluating sensor output characteristics and the timing requirements of the counting application. The specified 1500 V insulation voltage applies for 60 seconds.

Electrical Connection and Power Requirements

The BMXEHC0800H uses one 20-pin connector for its electrical connections. Its power consumption is divided between the internal bus supply and the encoder supply:

  • 200 mA at 3.3 V DC bus
  • 80 mA at 24 V DC encoder supply

These are separate supply requirements and should be considered when checking the available capacity of the PLC rack power supply and the external encoder supply.

Installation and Environmental Conditions

The module is designed for installation in a Modicon X80 module rack and is secured with two screws. Its IP20 enclosure protects the electronic components against contact and solid foreign objects within the limits of this protection rating; it does not provide protection against water ingress.

The extended operating temperature range of -25 to 70 deg C and specified resistance to gases, dust, sand, salt, and biological contaminants support its use in demanding installation environments. Relative humidity is specified at 10-95%, with condensation not permitted.

Certifications and Standards

The product carries the following certifications and environmental classifications according to the supplied Schneider specifications:

  • CE, UL, CSA, RCM and EAC
  • Merchant marine
  • ATEX Zone 2/22
  • IECEx Zone 2/22
  • Class I, Division 2 hazardous-location classification
  • IEC 61131-2 and IEC 61010-2-201
  • IACS E10
  • EN/IEC 61850-3, Location G
  • EN/IEC 61000-6-5, Interface Types 1 and 2

The specifications also identify gas resistance Class Gx under ISA S71.04, gas resistance Class 3C4, dust and sand resistance Class 3S4, and mould resistance Class 3B2.

Technical Specifications

Parameter Specification
Model BMXEHC0800H
Brand Schneider Electric
Product Type High-Speed Counter Module
Product Family Modicon X80
Automation Platform Modicon M340
Number of Channels 8
Maximum Counting Frequency 10 kHz
Number of Inputs 2 in single mode; 3 in special two-phase mode
Input Type High-speed
Input Voltage 24 V DC, Type 3
Input Voltage Limits 24 V DC
Input Current 4.5 mA
Guaranteed Logic 1 Voltage 11-30 V DC
Guaranteed Logic 1 Current Greater than 2 mA at U >= 11 V
Guaranteed Logic 0 Voltage 5 V DC
Guaranteed Logic 0 Current Less than 1.5 mA
Compatible Sensors 19.2-30 V DC 2-wire/3-wire proximity sensors
Encoder Compatibility 10-30 V DC push-pull incremental encoders
Counting Functions Event counting, up/down counting, modulo counting, frequency measurement, 32-bit up-counting and down-counting
Cycle Time 5 ms
Insulation Voltage 1500 V for 60 s
Electrical Connection 1 x 20-pin connector
Bus Current Consumption 200 mA at 3.3 V DC
Encoder Supply Current 80 mA at 24 V DC
Module Format Standard
Protective Coating Conformal coating
Operating Temperature -25 to 70 deg C
Relative Humidity 10-95%, non-condensing
Protection Rating IP20
Environmental Resistance Gas, dust, sand, salt and mould resistance classifications specified
Product Certifications CE, UL, CSA, RCM, EAC, Merchant Marine, ATEX, IECEx
Standards IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No. 61010-2-201, IACS E10
Product Weight 0.113 kg
EAN 3595864010427
Lifecycle Carbon Footprint 103 kg CO2 eq.

Frequently Asked Questions

Q: How many high-speed channels does the BMXEHC0800H provide?

A: The module provides 8 high-speed channels, with 2 inputs in single-mode operation and 3 inputs in its specified special two-phase operating mode. The maximum counting frequency is 10 kHz.

Q: Which sensors and encoders are compatible with the BMXEHC0800H?

A: It supports 19.2-30 V DC two-wire and three-wire proximity sensors, along with incremental encoders featuring 10-30 V DC push-pull outputs. The sensor output voltage and current characteristics must meet the module's specified input thresholds.

Q: What installation conditions should be checked before replacing this module?

A: Verify the Modicon X80 rack installation, two-screw fastening arrangement, 20-pin connection, bus power requirements and 24 V DC encoder supply. Also check the sensor configuration, counting mode and operating temperature requirements before commissioning.

Pagamento: T/T, Western Union.

Porto di spedizione: Xiamen.

Tempi di consegna: In genere 1–3 giorni lavorativi dopo la conferma del pagamento (in base alla disponibilità).

Consegna in tutto il mondo: Spediamo componenti per l’automazione industriale a clienti di tutto il mondo. Il costo del trasporto viene indicato nel preventivo relativo alla vostra richiesta.

Domande frequenti (FAQ)

Domande frequenti su preventivi, spedizione, garanzia e resi

Fai clic su Richiedi un preventivo nella pagina del prodotto e inviaci il codice prodotto, la quantità richiesta e il Paese di destinazione. Il nostro team commerciale ti risponderà indicando la disponibilità attuale, il prezzo e i tempi di consegna stimati.

Gli articoli disponibili vengono normalmente preparati dopo il pagamento e la conferma dell’ordine. La maggior parte degli ordini viene spedita dal nostro magazzino in Cina, anche se il luogo di spedizione può variare in base alle scorte disponibili.

Sì. Spediamo componenti per l’automazione industriale a clienti in tutto il mondo. Il costo e i tempi di spedizione dipendono dalla destinazione, dal peso del pacco, dalle dimensioni del prodotto e dai requisiti locali per l’importazione.

Utilizziamo comunemente i servizi di corriere internazionali DHL, FedEx, UPS e altri. Il corriere può essere scelto in base alla destinazione, alla velocità di consegna, alle dimensioni della spedizione e alle esigenze del cliente.

I nostri prodotti sono generalmente coperti da una garanzia di 12 mesi. I prodotti idonei possono inoltre essere restituiti ai sensi della nostra politica di rimborso entro 30 giorni. Contatta il nostro team prima di restituire qualsiasi articolo per confermare i termini applicabili e le istruzioni per la restituzione.

Products FAQs

Potrebbe piacerti anche