Vai alle informazioni sul prodotto
1 di 3

Schneider Electric BMXNRP0200 Modicon X80 Fiber Optic Repeater

18 disponibili
  • Manufacturer: Schneider
  • Product No.: BMXNRP0200
  • Country of origin: France
  • Product Type: Modicon X80 Fiber Optic Repeater
  • Condition: Completamente nuovo
  • Payment: Bonifico telegrafico, Western Union
  • Weight: 203 g
  • Shipping port: Xiamen
  • Warranty: 12 mesi
  • Descrizione
  • Reviews
  • Spedizione e pagamento

The Schneider Electric BMXNRP0200 is a two-channel fiber optic Ethernet repeater from the Modicon X80 range. It converts two 100BASE-TX copper Ethernet connections to two 100BASE-FX multimode fiber connections, extending Ethernet communication over distances of up to 2,000 m. It operates at 24 VDC and supports IEEE 802.3u Ethernet interfaces.

Ethernet and Fiber Optic Interfaces

The BMXNRP0200 provides four Ethernet connections:

  • 2 x RJ45 ports supporting 100BASE-TX.
  • 2 x multimode fiber optic ports supporting 100BASE-FX.
  • Ethernet interface compliance with IEEE 802.3u.
  • Optical wavelength: 1310 nm.
  • Maximum operating distance: 2,000 m.

The repeater transfers Ethernet communication between copper and fiber optic network segments. Fiber connections allow communication over longer distances than conventional copper Ethernet cabling and provide electrical isolation between connected network segments.

Optical Transmission Characteristics

The optical interface operates at a wavelength of 1310 nm. Its specified attenuation ranges depend on the multimode fiber core size:

  • 50/125 um fiber: -23.5 to -14 dB.
  • 62.5/125 um fiber: -20 to -14 dB.

The receiver sensitivity is specified from -31 to -14 dBm, with a rise/fall time of 3 ns. These values are relevant when checking fiber characteristics, optical signal levels and the transmission path against the required communication distance.

Power Supply and Diagnostics

The module operates with a rated voltage of 24 VDC. Its typical current consumption is 140 mA, with a maximum of 200 mA. Local LED indicators provide information about power status, error conditions, Ethernet link status, and fiber connection status and activity.

The BMXNRP0200 supports hot swapping according to the manufacturer's product specifications. This function is relevant when planning module replacement and maintenance procedures within the applicable Modicon X80 installation.

Installation and Environmental Conditions

The BMXNRP0200 is designed for installation in a module carrier and is secured with two screws. Ethernet interlink cables provide connections to CRA drop adapters in the described Modicon architecture.

Its IP20 enclosure rating is intended for installation inside a suitable equipment enclosure. The specified operating temperature is 0 to 60 deg C, while the storage temperature range is -40 to 70 deg C. The module also supports relative humidity from 0 to 95% and an operating altitude of up to 4,000 m.

Technical Specifications

Parameter Specification
Model BMXNRP0200
Brand Schneider Electric
Product Range Modicon X80
Product Type Fiber Optic Ethernet Repeater
Fiber Type Multimode
Rated Voltage 24 VDC
Typical Current Consumption 140 mA
Maximum Current Consumption 200 mA
Copper Ethernet Ports 2 x RJ45, 100BASE-TX
Fiber Ethernet Ports 2 x 100BASE-FX
Ethernet Standard IEEE 802.3u
Optical Wavelength 1310 nm
Operating Distance 0 to 2,000 m
Attenuation (50/125 um) -23.5 to -14 dB
Attenuation (62.5/125 um) -20 to -14 dB
Receiver Sensitivity -31 to -14 dBm
Rise/Fall Time 3 ns
Hot Swapping Supported
Local Diagnostics Power, error, Ethernet link, fiber link and activity LEDs
Dielectric Strength 1,400 VDC between field and bus; 500 VDC between channels
Protection Rating IP20
Operating Temperature 0 to 60 deg C
Storage Temperature -40 to 70 deg C
Relative Humidity 0 to 95%
Maximum Operating Altitude 4,000 m
Dimensions (W x H x D) 32 x 100 x 86 mm
Weight 203 g
Product Standards IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, CSA C22.2 No. 61010-2-201
Certifications CE, RCM, CSA, EAC, UL, Merchant Navy
EAN 3595864142753
Lifecycle Carbon Footprint 167 kg CO2 eq.

Frequently Asked Questions

Q: What is the difference between the two Ethernet interfaces on the BMXNRP0200?

A: The two RJ45 ports use 100BASE-TX copper Ethernet, while the two fiber optic ports use 100BASE-FX multimode fiber. This configuration allows copper Ethernet network segments to communicate through fiber optic connections.

Q: What fiber optic cable distance does the BMXNRP0200 support?

A: The specified operating distance is 0 to 2,000 m. The actual fiber installation must also satisfy the specified attenuation and receiver sensitivity limits for the selected multimode fiber type.

Q: Does the BMXNRP0200 support hot swapping?

A: Yes. Hot swapping is listed as a supported function in the product specifications. Replacement procedures should still follow the applicable Modicon X80 system and installation requirements.

Pagamento: T/T, Western Union.

Porto di spedizione: Xiamen.

Tempi di consegna: In genere 1–3 giorni lavorativi dopo la conferma del pagamento (in base alla disponibilità).

Consegna in tutto il mondo: Spediamo componenti per l’automazione industriale a clienti di tutto il mondo. Il costo del trasporto viene indicato nel preventivo relativo alla vostra richiesta.

Domande frequenti (FAQ)

Domande frequenti su preventivi, spedizione, garanzia e resi

Fai clic su Richiedi un preventivo nella pagina del prodotto e inviaci il codice prodotto, la quantità richiesta e il Paese di destinazione. Il nostro team commerciale ti risponderà indicando la disponibilità attuale, il prezzo e i tempi di consegna stimati.

Gli articoli disponibili vengono normalmente preparati dopo il pagamento e la conferma dell’ordine. La maggior parte degli ordini viene spedita dal nostro magazzino in Cina, anche se il luogo di spedizione può variare in base alle scorte disponibili.

Sì. Spediamo componenti per l’automazione industriale a clienti in tutto il mondo. Il costo e i tempi di spedizione dipendono dalla destinazione, dal peso del pacco, dalle dimensioni del prodotto e dai requisiti locali per l’importazione.

Utilizziamo comunemente i servizi di corriere internazionali DHL, FedEx, UPS e altri. Il corriere può essere scelto in base alla destinazione, alla velocità di consegna, alle dimensioni della spedizione e alle esigenze del cliente.

I nostri prodotti sono generalmente coperti da una garanzia di 12 mesi. I prodotti idonei possono inoltre essere restituiti ai sensi della nostra politica di rimborso entro 30 giorni. Contatta il nostro team prima di restituire qualsiasi articolo per confermare i termini applicabili e le istruzioni per la restituzione.

Products FAQs

Potrebbe piacerti anche