
Riceverai una notifica via e-mail quando questo prodotto sarà disponibile
- Descrizione
- Reviews
- Spedizione e pagamento
The BMXNRP0201 is a Modicon X80 fiber optic repeater designed to extend Ethernet communication over single-mode optical fiber. It provides two 100BASE-TX RJ45 ports and two 100BASE-FX fiber ports, supporting optical transmission distances of up to 15 km at a wavelength of 1310 nm. The module operates on a 24 V supply and supports Ethernet communication in Modicon automation architectures.
Ethernet and Fiber Optic Communication
The BMXNRP0201 converts Ethernet communication between copper and optical fiber interfaces. Its two RJ45 ports support 100BASE-TX, while the two fiber ports support 100BASE-FX in accordance with IEEE 802.3u.
The single-mode fiber interface allows Ethernet links to extend beyond the distance limitations of conventional copper cabling. The specified operating distance is 0 to 15,000 m, making the module suitable for communication links between separated automation equipment where optical fiber is required.
Optical Interface Characteristics
The optical interface operates at 1310 nm and specifies attenuation of -15 to -8 dB for 9/125 um fiber. The receiver sensitivity range is -31 to -8 dBm, and the signal rise/fall time is 2.5 ns.
These optical parameters are relevant when checking fiber type, link attenuation and receiver operating conditions. The actual achievable transmission distance depends on the optical link budget and the characteristics of the installed fiber and connectors.
Power Supply and Status Indication
The module uses a rated supply voltage of 24 V. Its typical current consumption is 140 mA, with a maximum of 200 mA. Local LED indicators provide information about the power supply, fault status, Ethernet connections and fiber link activity.
- 1 green LED for power supply status.
- 1 red LED for fault indication (ERR).
- 2 green LEDs for Ethernet link status.
- 2 green LEDs for fiber connection status and activity.
Installation and System Integration
The BMXNRP0201 belongs to the Schneider Electric Modicon X80 range, which provides a common I/O and communication hardware platform for Modicon automation architectures. The module is specified for use with Modicon M340 and M580 systems.
It is installed in a module rack and secured with two screws. The product documentation also identifies Ethernet interlink cables as the connection method for CRA drop adapters. Its specified hot-swap capability supports module replacement within an appropriately configured system; the applicable rack and system replacement procedures should still be observed.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXNRP0201 |
| Brand | Schneider Electric |
| Product Type | Fiber Optic Repeater |
| Product Series | Modicon X80 |
| Fiber Type | Single-mode |
| Rated Voltage | 24 V |
| Typical Current Consumption | 140 mA |
| Maximum Current Consumption | 200 mA |
| Copper Ethernet Ports | 2 x RJ45, 100BASE-TX |
| Fiber Ethernet Ports | 2 x 100BASE-FX |
| Ethernet Standard | IEEE 802.3u |
| Optical Wavelength | 1310 nm |
| Operating Distance | 0-15,000 m |
| Optical Attenuation | -15 to -8 dB (9/125 um) |
| Receiver Sensitivity | -31 to -8 dBm |
| Rise/Fall Time | 2.5 ns |
| Dielectric Strength | 1400 V DC between field and bus; 500 V DC between channels |
| Hot-Swap Capability | Supported |
| Protection Rating | IP20 |
| Dimensions (W x H x D) | 32 x 100 x 86 mm |
| Weight | 203 g |
| Operating Temperature | 0 to 60 deg C |
| Storage Temperature | -40 to 70 deg C |
| Relative Humidity | 0 to 95% |
| Operating Altitude | 0-4000 m |
| Environmental Carbon Footprint | 167 kg CO2 eq. |
| Certifications | CE, RCM, CSA, EAC, Merchant Navy, UL |
| Standards | IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, CSA C22.2 No. 61010-2-201 |
| EAN | 3595864144467 |
Frequently Asked Questions
Q: What is the difference between the BMXNRP0201 copper and fiber ports?
A: The two RJ45 ports provide 100BASE-TX Ethernet connections over copper, while the two 100BASE-FX ports provide Ethernet communication over single-mode optical fiber. This arrangement allows copper-based Ethernet equipment to communicate through an optical link.
Q: What fiber type and wavelength does the BMXNRP0201 require?
A: The specified fiber type is single-mode, with a nominal wavelength of 1310 nm and optical attenuation parameters based on 9/125 um fiber. Fiber and connector specifications should be checked against the optical link requirements.
Q: Does the BMXNRP0201 support hot swapping?
A: Yes. Schneider Electric lists hot swap as an available function for this module. Replacement must follow the applicable Modicon X80 rack and system procedures.
Pagamento: T/T, Western Union.
Porto di spedizione: Xiamen.
Tempi di consegna: In genere 1–3 giorni lavorativi dopo la conferma del pagamento (in base alla disponibilità).
Consegna in tutto il mondo: Spediamo componenti per l’automazione industriale a clienti di tutto il mondo. Il costo del trasporto viene indicato nel preventivo relativo alla vostra richiesta.
Domande frequenti (FAQ)
Domande frequenti su preventivi, spedizione, garanzia e resiFai clic su Richiedi un preventivo nella pagina del prodotto e inviaci il codice prodotto, la quantità richiesta e il Paese di destinazione. Il nostro team commerciale ti risponderà indicando la disponibilità attuale, il prezzo e i tempi di consegna stimati.
Gli articoli disponibili vengono normalmente preparati dopo il pagamento e la conferma dell’ordine. La maggior parte degli ordini viene spedita dal nostro magazzino in Cina, anche se il luogo di spedizione può variare in base alle scorte disponibili.
Sì. Spediamo componenti per l’automazione industriale a clienti in tutto il mondo. Il costo e i tempi di spedizione dipendono dalla destinazione, dal peso del pacco, dalle dimensioni del prodotto e dai requisiti locali per l’importazione.
Utilizziamo comunemente i servizi di corriere internazionali DHL, FedEx, UPS e altri. Il corriere può essere scelto in base alla destinazione, alla velocità di consegna, alle dimensioni della spedizione e alle esigenze del cliente.
I nostri prodotti sono generalmente coperti da una garanzia di 12 mesi. I prodotti idonei possono inoltre essere restituiti ai sensi della nostra politica di rimborso entro 30 giorni. Contatta il nostro team prima di restituire qualsiasi articolo per confermare i termini applicabili e le istruzioni per la restituzione.
Potrebbe piacerti anche
Articoli del blog
Notizie sull’automazione industriale, guide tecniche e aggiornamenti sui prodotti.
