Galeri media
Galeri media
Galeri media

Papan I/O Analog Lanjutan GE DS200TCCBG1BED TC2000

17 dalam stok

Manufacturer: General Electric
Product No.: DS200TCCBG1BED DS200TCCBG1BEDGBTC
Product Type: Papan I/O Analog Lanjutan
Condition: Serba Baharu
Payment: T/T, Western Union
Shipping port: Xiamen
Warranty: 12 bulan

Penerangan
Reviews
Penghantaran & Pembayaran

The GE I/O TC2000 Analog Board DS200TCCBG1BED includes a single 80196 microprocessor and accommodates multiple PROM modules. It also includes one LED that you can see from the side view of the board and two 50-pin connectors identified as JCC and JDD. The microprocessor relies on the processing instructions and firmware stored on the PROM modules. When you install a replacement board, you don't need to perform additional programming or firmware updates. Simply transfer the existing PROM modules from the old board to the sockets on the replacement board. This ensures you can resume drive activity, and processing will stay consistent.

GE DS200TCCBG1BED TC2000 Extended Analog I/O Board

You must reconnect the ribbon cables to the corresponding connectors on the replacement board. This applies to both the 50-pin and 34-pin ribbon cables. Since there are five 34-pin connectors, be cautious to connect the ribbon cables to the correct ones. Similarly, avoid mismatching the 50-pin connectors. Each connector has a clear identifier, and even if the replacement board is a newer version, the connector IDs will remain the same. While the components on the replacement board may have a different arrangement and appearance, extensive product testing guarantees compatibility between versions. Therefore, the replacement board will deliver the same processing results as the defective one. Simply plug the ribbon cables into their corresponding connectors on the new board, using the connector IDs to guide you in mapping the old board to the new board. Related Products

Brand	Model
GE	DS200TCCBG1BED
GE	DS200DCFBG1B
GE	DS200TCEAG1BTF
GE	DS200TCEBG1BAA
GE	DS200TCQCG1BKG
GE	DS200TCRAG1ACC
GE	DS200TCTGG1AFF

Pembayaran: T/T, Western Union.

Pelabuhan penghantaran: Xiamen.

Tempoh penghantaran: Biasanya 1–3 hari bekerja selepas pengesahan pembayaran (tertakluk pada stok).

Penghantaran ke seluruh dunia: Kami menghantar alat ganti automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran akan disebut harga bersama RFQ anda.

Soalan Lazim

Soalan lazim tentang sebut harga, penghantaran, waranti dan pemulangan

Klik Minta Sebut Harga pada halaman produk dan hantar nombor bahagian, kuantiti yang diperlukan serta negara destinasi kepada kami. Pasukan jualan kami akan membalas dengan ketersediaan semasa, harga dan anggaran masa penghantaran.

Item dalam stok biasanya disediakan selepas pembayaran dan pengesahan pesanan. Kebanyakan pesanan dihantar dari gudang kami di China, walaupun lokasi penghantaran mungkin berbeza bergantung pada stok semasa.

Ya. Kami menghantar komponen automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran dan masa transit bergantung pada destinasi, berat bungkusan, saiz produk dan keperluan import tempatan.

Kami biasanya menggunakan DHL, FedEx, UPS dan perkhidmatan kurier antarabangsa yang lain. Syarikat pengangkutan boleh dipilih berdasarkan destinasi, kelajuan penghantaran, saiz kiriman dan keperluan pelanggan.

Produk kami secara amnya dilindungi oleh waranti 12 bulan. Produk yang layak juga boleh dipulangkan di bawah polisi bayaran balik 30 hari kami. Sila hubungi pasukan kami sebelum memulangkan mana-mana item untuk mengesahkan terma yang berkenaan dan arahan pemulangan.