Galeri media
Galeri media
Galeri media

Honeywell TK-CCR013 Redundant ControlNet Interface Module

17 dalam stok

Manufacturer: Honeywell
Product No.: TK-CCR013
Product Type: Redundant ControlNet Interface Module
Condition: Serba Baharu
Payment: T/T, Western Union
Weight: 1.35 lb
Shipping port: Xiamen
Warranty: 12 bulan

Penerangan
Reviews
Penghantaran & Pembayaran

The Honeywell TK-CCR013 is a dual-media redundant ControlNet interface module designed for communication within Honeywell Experion PKS control systems. It provides a redundant network interface for controller and system communication. The TK prefix identifies the conformal-coated version of the ControlNet module, distinguishing it from the corresponding TC-series version.

Communication Function

The TK-CCR013 belongs to the Series D ControlNet interface family and uses dual-media network redundancy. In a redundant network arrangement, the dual-media interface provides two communication paths, allowing the system architecture to maintain network connectivity through its redundant media configuration.

It is intended for ControlNet-based Experion PKS architectures. It should not be confused with a single-media ControlNet interface or an Ethernet communication module.

Technical Specifications

Parameter	Specification
Model	TK-CCR013
Brand	Honeywell
Product Type	Redundant ControlNet Interface Module
Network Type	ControlNet
Network Configuration	Dual-Media / Redundant
Module Series	Series D
Coating	Conformal-coated version
Supply Voltage	24 VDC (as listed in supplied product information)
Weight	1.35 lbs

Network Configuration and Compatibility

The module provides separate A and B connections for dual-media ControlNet networks. Honeywell documentation specifies that the A and B trunk cable drop connections must be connected to their corresponding module connectors when operating in a redundant-media configuration.

A dual-media module can also operate in a single-media network configuration. In that arrangement, the network drop cable must connect to port A.

Replacement and Lifecycle Information

The TK-CCR013 is identified as an obsolete Series D module in Honeywell's Experion PKS Control Hardware Installation Guide (Release 516).

Successor model: TK-CCR014, Series E dual-media redundant ControlNet interface.
Replacement consideration: If a CCR013 module fails in a redundant chassis pair, Honeywell specifies replacing both partner modules with Series E CCR014 modules.
Both modules in a redundant chassis pair must be the same type.
Replacement firmware and startup diagnostics must be checked before returning the system to operation.

Frequently Asked Questions

Q: What is the difference between TK-CCR013 and a single-media ControlNet module?

A: The TK-CCR013 supports dual-media ControlNet communication through separate A and B network connections. A single-media module uses only one network connection and does not provide the same dual-media configuration.

Q: Can the TK-CCR013 be replaced directly with a TK-CCR014?

A: The TK-CCR014 is the documented Series E successor. However, in a redundant chassis pair, both partner CCR013 modules must be replaced with CCR014 modules of the same type. Firmware compatibility and system configuration must also be verified.

Q: Is the TK-CCR013 hot-swappable?

A: Honeywell's installation procedure specifies switching off chassis power before removing the ControlNet module. Do not assume that this model supports removal under power.

Pembayaran: T/T, Western Union.

Pelabuhan penghantaran: Xiamen.

Tempoh penghantaran: Biasanya 1–3 hari bekerja selepas pengesahan pembayaran (tertakluk pada stok).

Penghantaran ke seluruh dunia: Kami menghantar alat ganti automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran akan disebut harga bersama RFQ anda.

Soalan Lazim

Soalan lazim tentang sebut harga, penghantaran, waranti dan pemulangan

Klik Minta Sebut Harga pada halaman produk dan hantar nombor bahagian, kuantiti yang diperlukan serta negara destinasi kepada kami. Pasukan jualan kami akan membalas dengan ketersediaan semasa, harga dan anggaran masa penghantaran.

Item dalam stok biasanya disediakan selepas pembayaran dan pengesahan pesanan. Kebanyakan pesanan dihantar dari gudang kami di China, walaupun lokasi penghantaran mungkin berbeza bergantung pada stok semasa.

Ya. Kami menghantar komponen automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran dan masa transit bergantung pada destinasi, berat bungkusan, saiz produk dan keperluan import tempatan.

Kami biasanya menggunakan DHL, FedEx, UPS dan perkhidmatan kurier antarabangsa yang lain. Syarikat pengangkutan boleh dipilih berdasarkan destinasi, kelajuan penghantaran, saiz kiriman dan keperluan pelanggan.

Produk kami secara amnya dilindungi oleh waranti 12 bulan. Produk yang layak juga boleh dipulangkan di bawah polisi bayaran balik 30 hari kami. Sila hubungi pasukan kami sebelum memulangkan mana-mana item untuk mengesahkan terma yang berkenaan dan arahan pemulangan.