Lompat ke maklumat produk
1 daripada 3

Schneider BMXCPS3020H Modicon X80 Power Supply Module

18 dalam stok
  • Manufacturer: Schneider
  • Product No.: BMXCPS3020H
  • Country of origin: France
  • Product Type: Modicon X80 Power Supply Module
  • Condition: Serba Baharu
  • Payment: T/T, Western Union
  • Weight: 0.34 kg
  • Shipping port: Xiamen
  • Warranty: 12 bulan
  • Penerangan
  • Reviews
  • Penghantaran & Pembayaran

The Schneider Electric BMXCPS3020H is an isolated DC power supply module from the Modicon X80 range, designed for automation systems operating in extended-temperature and demanding environmental conditions. It accepts a 24-48 V DC primary supply and provides separate power outputs for I/O module logic and the processor. Its reinforced environmental protection supports operation from -25 to 70 deg C.

Power Supply and Output Configuration

The BMXCPS3020H converts the incoming DC supply into the secondary power required by the X80 backplane. It provides separate 24 V DC and 3.3 V DC outputs for the I/O module supply and processor, and I/O logic circuits, respectively.

The available output power depends on the operating temperature. At temperatures from 0 to 60 deg C, the module provides up to 31.2 W at 24 V DC and 15 W at 3.3 V DC. Across the extended -25 to 70 deg C range, these ratings are reduced to 23.4 W and 11.3 W, respectively. This derating must be considered when calculating the power budget of the installed rack.

Input Protection and Status Monitoring

The primary circuit has an internal fuse that is not accessible for replacement. The secondary circuit includes overload, overvoltage, and short-circuit protection for the 24 V sensor power supply connection.

A green LED indicates that the rack voltage is OK. The module also includes a RESET pushbutton for a cold start, allowing the power supply and associated rack operation to be restarted through the designated reset function.

Electrical Connections and Mounting

The module uses a 5-pin connector for the DC supply input and protective earth, together with a 2-pin connector for the alarm relay. The specified maximum cable distances between devices are 10 m with 1.5 mm2 copper cable or 15 m with 2.5 mm2 copper cable.

Installation requires mounting the power supply in a compatible X80 module rack and securing it with two screws. The module has an IP20 protection rating and a maximum power dissipation of 8.5 W.

Technical Specifications

Parameter Specification
Model BMXCPS3020H
Brand Schneider Electric
Product Range Modicon X80
Product Type Ruggedized DC Power Supply Module
Primary Input Voltage 24-48 V DC, isolated
Primary Voltage Limits 18-62.4 V DC
Input Current 1.65 A at 24 V DC; 0.83 A at 48 V DC
Total Secondary Power Up to 31.2 W
Secondary Output Voltage 24 V DC / 3.3 V DC
Output Current 1.3 A at 24 V DC; 4.5 A at 3.3 V DC
Secondary Power at 0 to 60 deg C 31.2 W at 24 V DC; 15 W at 3.3 V DC
Secondary Power at -25 to 70 deg C 23.4 W at 24 V DC; 11.3 W at 3.3 V DC
Maximum Power Dissipation 8.5 W
Inrush Current 30 A at 24 V DC; 60 A at 48 V DC
Status Indicator 1 green LED
Reset Function Cold-start RESET pushbutton
Alarm Connection 2-pin connector
Power Connection 5-pin connector with protective earth
Primary Circuit Protection Internal, non-accessible fuse
Secondary Circuit Protection Overload, overvoltage and short-circuit protection
Backplane Compatibility Not compatible with BMEXBP..02
Protection Rating IP20
Insulation Resistance >= 10 MOhm, primary/earth and primary/secondary
Dielectric Strength 1500 V, primary/earth and primary/secondary
Vibration Resistance 3 Gn
Shock Resistance 30 gn
Operating Temperature -25 to 70 deg C
Storage Temperature -40 to 85 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Operating Altitude 0-2,000 m; derating required from 2,000 to 5,000 m
MTBF 4,600,000 hours
Environmental Protection Protective coating
Weight 0.34 kg
EAN 3595864029771

Environmental Resistance and Certifications

The BMXCPS3020H is designed for environments requiring additional resistance to gas, dust, sand, salt and biological contaminants. Its environmental specifications include gas resistance class Gx according to ISA S71.04, gas resistance class 3C4, dust and sand resistance class 3S4, and mold resistance class 3B2 according to IEC 60721-3-3.

The specified certifications and standards include:

  • Certifications: CE, UL, CSA, RCM, EAC, Merchant Navy, ATEX Zone 2/22 and IECEx Zone 2/22.
  • Standards: IEC 61131-2, IEC 61010-2-201, UL 61010-2-201 and CSA C22.2 No. 61010-2-201.
  • Additional environmental standards: EN/IEC 61000-6-5 and EN/IEC 61850-3.
  • Hazardous location classification: Class I, Division 2.

Frequently Asked Questions

Q: What is the difference between BMXCPS3020H and BMXCPS3020?

A: Both models belong to the Modicon X80 DC power supply family and use a 24-48 V DC isolated primary supply. The H version is the hardened version, intended for extended environmental conditions, including an operating temperature range of -25 to 70 deg C. Their environmental and installation requirements should be checked separately.

Q: Can BMXCPS3020H be installed on a BMEXBP..02 backplane?

A: No. BMXCPS3020H is a standalone power supply and is not compatible with BMEXBP..02 redundant power supply backplanes. The rack configuration must be checked before replacement or installation.

Q: Does the BMXCPS3020H provide the same output power throughout its operating temperature range?

A: No. Its output power is derated at extended temperatures. At 0 to 60 deg C, the ratings are 31.2 W at 24 V DC and 15 W at 3.3 V DC. From -25 to 70 deg C, these ratings decrease to 23.4 W and 11.3 W, respectively.

Pembayaran: T/T, Western Union.

Pelabuhan penghantaran: Xiamen.

Tempoh penghantaran: Biasanya 1–3 hari bekerja selepas pengesahan pembayaran (tertakluk pada stok).

Penghantaran ke seluruh dunia: Kami menghantar alat ganti automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran akan disebut harga bersama RFQ anda.

Soalan Lazim

Soalan lazim tentang sebut harga, penghantaran, waranti dan pemulangan

Klik Minta Sebut Harga pada halaman produk dan hantar nombor bahagian, kuantiti yang diperlukan serta negara destinasi kepada kami. Pasukan jualan kami akan membalas dengan ketersediaan semasa, harga dan anggaran masa penghantaran.

Item dalam stok biasanya disediakan selepas pembayaran dan pengesahan pesanan. Kebanyakan pesanan dihantar dari gudang kami di China, walaupun lokasi penghantaran mungkin berbeza bergantung pada stok semasa.

Ya. Kami menghantar komponen automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran dan masa transit bergantung pada destinasi, berat bungkusan, saiz produk dan keperluan import tempatan.

Kami biasanya menggunakan DHL, FedEx, UPS dan perkhidmatan kurier antarabangsa yang lain. Syarikat pengangkutan boleh dipilih berdasarkan destinasi, kelajuan penghantaran, saiz kiriman dan keperluan pelanggan.

Produk kami secara amnya dilindungi oleh waranti 12 bulan. Produk yang layak juga boleh dipulangkan di bawah polisi bayaran balik 30 hari kami. Sila hubungi pasukan kami sebelum memulangkan mana-mana item untuk mengesahkan terma yang berkenaan dan arahan pemulangan.

Products FAQs

Anda mungkin juga suka