Lompat ke maklumat produk
1 daripada 3

Schneider BMXDRA0805 Modicon X80 Discrete Relay Output Module

18 dalam stok
  • Manufacturer: Schneider
  • Product No.: BMXDRA0805
  • Country of origin: France
  • Product Type: Modicon X80 Discrete Relay Output Module
  • Condition: Serba Baharu
  • Payment: T/T, Western Union
  • Weight: 0.145 kg
  • Shipping port: Xiamen
  • Warranty: 12 bulan
  • Penerangan
  • Reviews
  • Penghantaran & Pembayaran

The Schneider Electric BMXDRA0805 is an 8-channel discrete relay output module for the Modicon M340 automation platform. Part of the Modicon X80 range, it provides relay-based switching for DC output circuits with a specified 12-24 VDC operating range. The module supports removable 20-pin screw or spring terminal connections and is designed for harsh-environment installations in its H-rated configuration.

Functional Description

The BMXDRA0805 provides eight relay output channels for switching external loads through discrete control signals. Relay contacts provide electrically isolated switching between the control electronics and the connected output circuits, subject to the module's specified contact and wiring limits.

The module has an output activation response time of 10 ms and a deactivation response time of less than 8 ms. These values are relevant when evaluating output timing in control sequences, particularly where relay switching response must be considered separately from PLC scan time.

Electrical and Connection Characteristics

The module uses a removable 20-pin terminal connection, available with screw or spring-clamp wiring arrangements. The connection type should be matched to the installed terminal block and cabinet wiring configuration.

The specified minimum switching current is 10 mA at 5 VDC. This is a minimum contact-load condition, not the module's rated maximum switching current. Maximum contact voltage, current and load ratings should be checked against the applicable product documentation before connecting field devices.

Output Protection and Electrical Isolation

The output circuits do not have built-in short-circuit or overload protection. Schneider specifies an external fast-blow fuse for each relay or protected group of channels. For inductive loads, additional suppression is required: a discharge diode for DC circuits and an RC circuit or ZNO surge limiter for AC circuits.

The module has an insulation resistance greater than 10 MOhm at 500 VDC and a dielectric withstand rating of 2000 VAC at 50/60 Hz for 1 minute. These specifications are relevant when checking electrical separation and the protection arrangements of connected field circuits.

Environmental and Mechanical Characteristics

The module has an IP20 protection rating and a product weight of 0.145 kg. Its specified relative humidity range is 5-95% at 55 deg C, with no condensation permitted.

The BMXDRA0805H is the harsh-environment variant identified by the H suffix. The supplied Schneider product information associates this variant with a temperature range of -25 to +70 deg C and protective coating. These conditions should not be attributed to the standard BMXDRA0805 without the H suffix.

Lifecycle and Replacement Information

Schneider Electric lists the BMXDRA0805 as discontinued on 30 June 2022, with service scheduled to end on 30 June 2030, according to the supplied regional product record. The recommended replacement is BMXDRA0815, an 8-channel relay output module with a different specified DC voltage range of 24-125 VDC and an AC range of 24-240 VAC.

The replacement should not be treated as an electrically identical substitute. Check field supply voltage, relay load ratings, terminal arrangements and application requirements before changing the installed module.

Schneider Electric Österreich+1

Technical Specifications

Parameter Specification
Model BMXDRA0805
Brand Schneider Electric
Product Range Modicon X80
Product Type Discrete Relay Output Module
Number of Outputs 8
Output Type Relay, normally open
Output Voltage 12-24 VDC; 24-240 VAC
DC Operating Voltage Range 10-34 VDC
AC Operating Voltage Range 19-264 VAC
Conventional Free-Air Thermal Current 3 A
Minimum Switching Current 10 mA at 5 VDC
Output Activation Time Less than 10 ms
Output Deactivation Time Less than 8 ms
Insulation Resistance Greater than 10 MOhm at 500 VDC
Dielectric Strength 2000 VAC at 50/60 Hz for 1 min
Power Dissipation 2.7 W
Typical Current Consumption 79 mA at 3.3 VDC
MTBF 2,119,902 hours
Connection Removable 20-pin terminal block
Terminal Type Screw or spring-clamp
Output Protection External fast-blow fuse; external inductive-load suppression
Protection Rating IP20
Relative Humidity 5-95% at 55 deg C, non-condensing
Product Weight 0.145 kg
EAN 3595863910650
Recommended Replacement BMXDRA0815

Frequently Asked Questions

Q: Can the BMXDRA0805 switch both AC and DC loads?

A: Yes. Its relay outputs support specified AC and DC switching circuits. The documented ranges are 19-264 VAC and 10-34 VDC. The actual load must also satisfy the applicable relay switching and electrical durability ratings.

Q: Does the BMXDRA0805 provide built-in short-circuit protection?

A: No. External fast-blow fuses are required for the relay output circuits. Inductive loads also require suitable external suppression, selected according to whether the switched circuit is AC or DC.

Q: What is the difference between BMXDRA0805 and BMXDRA0805H?

A: The H suffix identifies the harsh-environment version. The supplied product information specifies a -25 to +70 deg C operating range and protective coating for this version. These characteristics should not be assumed for the standard BMXDRA0805.

Pembayaran: T/T, Western Union.

Pelabuhan penghantaran: Xiamen.

Tempoh penghantaran: Biasanya 1–3 hari bekerja selepas pengesahan pembayaran (tertakluk pada stok).

Penghantaran ke seluruh dunia: Kami menghantar alat ganti automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran akan disebut harga bersama RFQ anda.

Soalan Lazim

Soalan lazim tentang sebut harga, penghantaran, waranti dan pemulangan

Klik Minta Sebut Harga pada halaman produk dan hantar nombor bahagian, kuantiti yang diperlukan serta negara destinasi kepada kami. Pasukan jualan kami akan membalas dengan ketersediaan semasa, harga dan anggaran masa penghantaran.

Item dalam stok biasanya disediakan selepas pembayaran dan pengesahan pesanan. Kebanyakan pesanan dihantar dari gudang kami di China, walaupun lokasi penghantaran mungkin berbeza bergantung pada stok semasa.

Ya. Kami menghantar komponen automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran dan masa transit bergantung pada destinasi, berat bungkusan, saiz produk dan keperluan import tempatan.

Kami biasanya menggunakan DHL, FedEx, UPS dan perkhidmatan kurier antarabangsa yang lain. Syarikat pengangkutan boleh dipilih berdasarkan destinasi, kelajuan penghantaran, saiz kiriman dan keperluan pelanggan.

Produk kami secara amnya dilindungi oleh waranti 12 bulan. Produk yang layak juga boleh dipulangkan di bawah polisi bayaran balik 30 hari kami. Sila hubungi pasukan kami sebelum memulangkan mana-mana item untuk mengesahkan terma yang berkenaan dan arahan pemulangan.

Products FAQs

Anda mungkin juga suka