Lompat ke maklumat produk
1 daripada 3

Schneider BMXEHC0200H Modicon X80 High-Speed Counter Module

18 dalam stok
  • Manufacturer: Schneider
  • Product No.: BMXEHC0200H
  • Country of origin: France
  • Product Type: Modicon X80 High-Speed Counter Module
  • Condition: Serba Baharu
  • Payment: T/T, Western Union
  • Weight: 0.112 kg
  • Shipping port: Xiamen
  • Warranty: 12 bulan
  • Penerangan
  • Reviews
  • Penghantaran & Pembayaran

The Schneider Electric BMXEHC0200H is a hardened high-speed counter module for the Modicon M340 automation platform. It provides two independent high-speed counting channels for processing signals from proximity sensors and incremental encoders. The module supports counting frequencies up to 60 kHz and includes configurable counting functions, auxiliary inputs, and two discrete outputs for counter-related control operations.

High-Speed Counting and Signal Processing

The BMXEHC0200H provides two high-speed counter channels, each designed to process external pulse signals. It accepts signals from 2-wire or 3-wire proximity sensors operating at 19.2-30 V DC, incremental encoders with push-pull outputs, and 10-30 V DC totem-pole devices.

Its counting functions support different measurement and control requirements:

  • Ratio counting and event counting.
  • Frequency measurement.
  • Up/down counting.
  • 32-bit counter operation.
  • Loop (modulo) counting.
  • Time-period measurement.
  • Width modulation.

The 1 ms cycle time supports periodic counter processing. The maximum counting frequency of 60 kHz defines the upper input pulse frequency supported by the module.

Input and Output Configuration

The module provides six inputs in total: three high-speed inputs and three auxiliary inputs. The input interface supports 24 V DC Type 3 signals, with defined voltage and current thresholds for reliable state recognition.

Two discrete outputs are available, with positive or negative logic configurable. Integrated overload and short-circuit protection provides electrical protection for the output circuits.

The output functions can be used in counter-related control operations. Actual load selection must account for the per-output current limit, module-level current limit, output voltage range, and load-current specifications.

Hardened Design for Severe Environments

The BMXEHC0200H belongs to the Modicon X80 common I/O platform and features conformal coating for operation in more demanding environmental conditions. Its specified operating temperature range is -25 to +70 deg C, with IP20 protection for the electronic assembly.

The environmental specifications include resistance classifications for gases, dust, sand, mold growth, and fungal spores. These characteristics are relevant when evaluating the module for installations exposed to industrial contaminants.

Technical Specifications

Parameter Specification
Model BMXEHC0200H
Brand Schneider Electric
Product Type Hardened High-Speed Counter Module
Product Range Modicon X80
Automation Platform Modicon M340
Application Severe environments
Number of Channels 2
Maximum Counting Frequency 60 kHz
Number of Inputs 6
High-Speed Inputs 3
Auxiliary Inputs 3
Input Voltage 24 V DC, Type 3
Input Compatibility 19.2-30 V DC 2-wire/3-wire proximity sensors; incremental encoders with push-pull outputs; 10-30 V DC totem-pole signals
Input Current 2 mA at 11 V
Voltage State 1 Guaranteed 11-30 V DC
Current State 1 Guaranteed Greater than 2 mA at U >= 11 V
Voltage State 0 Guaranteed Less than 5 V DC
Current State 0 Guaranteed Less than 1.5 mA
Number of Outputs 2
Output Voltage 24 V DC
Output Voltage Limits 19.2-30 V
Discrete Output Logic Positive or negative configurable
Maximum Output Current 2 A per module; 0.5 A per output
Maximum Load Current 1 A per module; 0.5 A per output
Maximum Leakage Current 0.1 mA at state 0
Maximum Voltage Drop Less than 3 V at state 1
Output Overload Protection Integrated
Output Short-Circuit Protection Integrated, 1.5 A
Overlap Time 0.2 ms
Counter Cycle Time 1 ms
Counter Functions Ratio count, frequency meter, down counting, 32-bit counting, modulo counting, time-period measurement, event counting, width modulation
Isolation Voltage 1500 V for 60 s
Current Consumption 200 mA at 3.3 V DC bus
Rack Current Consumption 40 mA at 24 V DC rack
Sensor Power Consumption 80 mA at 24 V DC sensor supply
Electrical Connections 1 x 10-pin connector for auxiliary inputs and sensor power; 2 x 16-pin connectors for counter channel sensors
Module Format Standard
Protective Treatment Conformal coating
Operating Temperature -25 to +70 deg C
Relative Humidity 10-95%, non-condensing
Protection Rating IP20
Environmental Classification Gx ISA S71.04; 3C4, 3S4 and 3B2 IEC 60721-3-3
Hazardous Location Classification Class I, Division 2
Product Certifications CE, UL, CSA, RCM, EAC
Standards IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No. 61010-2-201, IACS E10
Net Weight 0.112 kg
Country of Origin USA
GTIN 3595864010410

Installation and Electrical Connections

The BMXEHC0200H is installed on the Modicon X80 rack and secured using two screws. Its three dedicated connectors separate the auxiliary input and sensor power wiring from the sensor connections for counter channels 0 and 1.

When preparing the wiring, verify the sensor output type, voltage levels, and input state thresholds. For output circuits, check both the 0.5 A per-output limit and the 1 A maximum module load current.

Frequently Asked Questions

Q: What is the difference between the two counter channels and the six inputs?

A: The module has two high-speed counter channels and six physical inputs in total. These comprise three high-speed inputs and three auxiliary inputs. The six-input configuration should not be interpreted as six independent high-speed counting channels.

Q: Which sensor types can be connected to the BMXEHC0200H?

A: The module supports 19.2-30 V DC 2-wire and 3-wire proximity sensors, incremental encoders with push-pull outputs, and 10-30 V DC totem-pole signals. The selected sensor must also meet the specified input voltage and current thresholds.

Q: Can the module operate in high-temperature industrial environments?

A: Yes. The specified operating temperature range is -25 to +70 deg C. Its conformal coating and environmental resistance classifications support applications in severe environments, subject to the specified installation and operating conditions.

Pembayaran: T/T, Western Union.

Pelabuhan penghantaran: Xiamen.

Tempoh penghantaran: Biasanya 1–3 hari bekerja selepas pengesahan pembayaran (tertakluk pada stok).

Penghantaran ke seluruh dunia: Kami menghantar alat ganti automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran akan disebut harga bersama RFQ anda.

Soalan Lazim

Soalan lazim tentang sebut harga, penghantaran, waranti dan pemulangan

Klik Minta Sebut Harga pada halaman produk dan hantar nombor bahagian, kuantiti yang diperlukan serta negara destinasi kepada kami. Pasukan jualan kami akan membalas dengan ketersediaan semasa, harga dan anggaran masa penghantaran.

Item dalam stok biasanya disediakan selepas pembayaran dan pengesahan pesanan. Kebanyakan pesanan dihantar dari gudang kami di China, walaupun lokasi penghantaran mungkin berbeza bergantung pada stok semasa.

Ya. Kami menghantar komponen automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran dan masa transit bergantung pada destinasi, berat bungkusan, saiz produk dan keperluan import tempatan.

Kami biasanya menggunakan DHL, FedEx, UPS dan perkhidmatan kurier antarabangsa yang lain. Syarikat pengangkutan boleh dipilih berdasarkan destinasi, kelajuan penghantaran, saiz kiriman dan keperluan pelanggan.

Produk kami secara amnya dilindungi oleh waranti 12 bulan. Produk yang layak juga boleh dipulangkan di bawah polisi bayaran balik 30 hari kami. Sila hubungi pasukan kami sebelum memulangkan mana-mana item untuk mengesahkan terma yang berkenaan dan arahan pemulangan.

Products FAQs

Anda mungkin juga suka