Galeri media
Galeri media
Galeri media

Schneider Electric BMXAMI0800RU Modicon X80 Analog Input Module

18 dalam stok

Manufacturer: Schneider
Product No.: BMXAMI0800RU
Country of origin: France
Product Type: Modicon X80 Analog Input Module
Condition: Serba Baharu
Payment: T/T, Western Union
Weight: 0.165 kg
Shipping port: Xiamen
Warranty: 12 bulan

Penerangan
Reviews
Penghantaran & Pembayaran

Configured for high-speed analog signal acquisition in the Modicon X80 I/O platform, the Schneider Electric BMXAMI0800RU (BMXAMI0800 analog input module) provides 8 non-isolated analog input channels for voltage and current measurement. It mounts on Modicon X80 backplanes and supports Modicon M340 and Modicon M580 controllers.

Hardware Specifications

Parameter	Specification
Model	BMXAMI0800RU
Brand	Schneider Electric
Product Family	Modicon X80
Product Type	Analog input module
Compatible Controllers	Modicon M340, Modicon M580
Number of Channels	8 analog inputs
Input Type	High-level analog input
Channel Isolation	Non-isolated between channels
Voltage Input	+/-10 V, +/-5 V, 0...10 V, 0...5 V, 1...5 V
Current Input	+/-20 mA, 0...20 mA, 4...20 mA
A/D Conversion	16 bits
Resolution	15 bits + sign
Voltage Input Impedance	10 MOhm
Current Input Impedance	250 Ohm
Fast Read Cycle	1 ms + 1 ms x number of channels used
Nominal Read Cycle	9 ms for 8 channels
Measurement Error	Up to +/-0.1% of full scale for voltage inputs and up to +/-0.3% of full scale for current inputs over 0...60 deg C
Digital Filtering	First-order digital filtering
Crosstalk Attenuation	Minimum 80 dB
Common Mode Rejection	100 dB
Channel-to-Bus Isolation	1400 V DC
Channel-to-Ground Isolation	1400 V DC
Maximum Input Overload	Up to +/-30 V for voltage ranges; up to +/-30 mA for current ranges
Connection	28-way removable terminal block or FTB pre-wired cable
Power Consumption	0.90 W typical, 1.10 W maximum at 24 VDC; 0.32 W typical, 0.48 W maximum at 3.3 VDC
Current Consumption	150 mA at 3.3 VDC; 41 mA at 24 VDC
Weight	0.165 kg
Operating Temp	0...60 deg C
Storage Temp	-40...85 deg C
Relative Humidity	5...95% at 55 deg C, non-condensing
Protection Rating	IP20
Vibration Resistance	3 gn
Shock Resistance	30 gn
Operating Altitude	0...2000 m; 2000...5000 m with derating
Protective Treatment	Conformal coating
Status Indication	RUN LED, channel diagnostic LEDs, ERR LED, I/O LED
Certifications	CE, RCM, CSA, EAC, Merchant Navy, UL
Standards	IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, CSA C22.2 No 61010-2-201
Origin	Not specified in the provided data

Modicon X80 Analog Signal Processing

The BMXAMI0800RU provides eight analog acquisition channels within a single Modicon X80 module position. Voltage and current signals are converted with 16-bit A/D conversion and a stated resolution of 15 bits + sign. The module supports voltage ranges from +/-10 V to 1...5 V and current ranges from +/-20 mA to 4...20 mA.

The fast read cycle is defined as 1 ms plus 1 ms for each active channel. With all 8 channels active, the stated nominal read cycle is 9 ms. First-order digital filtering is provided for the acquired values.

The module specifies a minimum crosstalk attenuation of 80 dB and common mode rejection of 100 dB. These parameters define the signal separation and common-mode rejection characteristics of the analog acquisition circuit.

Conformal Coating and Backplane Integration

The RU version is specified with conformal coating for harsh-environment protection. The module mounts directly on a Modicon X80 backplane and interfaces with field wiring through a 28-way removable terminal block or FTB pre-wired cable.

The provided data identifies the input channels as non-isolated between channels while also specifying 1400 V DC isolation between channels and ground and between channels and the bus. Installation documentation should therefore be checked against the exact hardware revision and wiring configuration before applying channel-to-channel isolation assumptions.

Frequently Asked Questions

Q: How many analog channels does the BMXAMI0800RU provide?
A: It provides 8 analog input channels.

Q: What signal ranges are supported?
A: Voltage ranges include +/-10 V, +/-5 V, 0...10 V, 0...5 V, and 1...5 V. Current ranges include +/-20 mA, 0...20 mA, and 4...20 mA.

Q: What is the stated power consumption?
A: The module consumes 0.90 W typical and 1.10 W maximum at 24 VDC, with an additional stated 3.3 VDC consumption of 0.32 W typical and 0.48 W maximum.

Field Installation Guidelines

Install the BMXAMI0800RU on the specified Modicon X80 backplane and secure the module before connecting field wiring. Use the specified 28-way removable terminal block or compatible FTB pre-wired cable interface.

Keep analog signal wiring separated from high-current power conductors and switching circuits where practical. Maintain appropriate cable routing and shielding practices for low-level analog signals. Terminate cable shields according to the control-system grounding design and the applicable installation documentation.

Verify the selected voltage or current input range before commissioning each channel. For current inputs requiring an external shunt or specified wiring arrangement, verify the resistor value and wiring configuration before applying the field signal.

The module has IP20 protection and a stated operating range of 0...60 deg C. Confirm cabinet ventilation, humidity control, vibration conditions, and installation altitude against the specified environmental limits before commissioning.

Pembayaran: T/T, Western Union.

Pelabuhan penghantaran: Xiamen.

Tempoh penghantaran: Biasanya 1–3 hari bekerja selepas pengesahan pembayaran (tertakluk pada stok).

Penghantaran ke seluruh dunia: Kami menghantar alat ganti automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran akan disebut harga bersama RFQ anda.

Soalan Lazim

Soalan lazim tentang sebut harga, penghantaran, waranti dan pemulangan

Klik Minta Sebut Harga pada halaman produk dan hantar nombor bahagian, kuantiti yang diperlukan serta negara destinasi kepada kami. Pasukan jualan kami akan membalas dengan ketersediaan semasa, harga dan anggaran masa penghantaran.

Item dalam stok biasanya disediakan selepas pembayaran dan pengesahan pesanan. Kebanyakan pesanan dihantar dari gudang kami di China, walaupun lokasi penghantaran mungkin berbeza bergantung pada stok semasa.

Ya. Kami menghantar komponen automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran dan masa transit bergantung pada destinasi, berat bungkusan, saiz produk dan keperluan import tempatan.

Kami biasanya menggunakan DHL, FedEx, UPS dan perkhidmatan kurier antarabangsa yang lain. Syarikat pengangkutan boleh dipilih berdasarkan destinasi, kelajuan penghantaran, saiz kiriman dan keperluan pelanggan.

Produk kami secara amnya dilindungi oleh waranti 12 bulan. Produk yang layak juga boleh dipulangkan di bawah polisi bayaran balik 30 hari kami. Sila hubungi pasukan kami sebelum memulangkan mana-mana item untuk mengesahkan terma yang berkenaan dan arahan pemulangan.