
Dimaklumkan melalui e-mel apabila produk ini tersedia semula
- Penerangan
- Reviews
- Penghantaran & Pembayaran
The Schneider Electric BMXDDO6402K is a 64-channel discrete transistor output module in the Modicon X80 range. It operates with a 24 VDC output supply and uses positive output logic. The module provides individual channel control, output status detection thresholds, and protection against reverse polarity, external short circuits, overloads, and overvoltage.
Output Configuration and Operation
The BMXDDO6402K provides 64 transistor output channels for controlling external actuators and other discrete loads. Its positive output logic determines the output switching arrangement. The specified output response time is 1.2 ms, which defines the delay between an output command and the corresponding output response.
The module supports output paralleling, with a maximum of three outputs. This configuration must follow the manufacturer's channel and load restrictions. The specified switching frequency is expressed as 0.5/LI² Hz, so the applicable load inductance and current conditions should be checked before selecting a switching rate.
Electrical Protection and Diagnostics
The output circuits include reverse-polarity, external short-circuit, overload, and overvoltage protection. An external fuse is also specified as part of the protection arrangement. These functions address electrical faults that can occur in field wiring and connected loads.
The module provides voltage detection thresholds for preactuator fault monitoring. A voltage below 14 VDC indicates a preactuator fault, while a voltage above 18 VDC is specified for preactuator detection at state 0. These thresholds are relevant when checking output-side voltage conditions during troubleshooting.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDO6402K |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Discrete Transistor Output Module |
| Number of Outputs | 64 |
| Output Technology | Solid-state transistor |
| Output Logic | Positive |
| Rated Output Voltage | 24 VDC |
| Output Voltage Range | 19-30 VDC |
| Rated Current per Channel | 0.1 A |
| Maximum Current per Module | 6.4 A |
| Output Response Time | 1.2 ms |
| Maximum Parallel Outputs | 3 |
| Maximum Overload Duration | 15 ms |
| Switching Frequency | 0.5/LI² Hz |
| Minimum Ohmic Load Impedance | 220 Ohm |
| Voltage Detection Threshold | Below 14 VDC: preactuator fault; above 18 VDC: preactuator at state 0 |
| Insulation Resistance | Greater than 10 MOhm at 500 VDC |
| Dielectric Strength | 1500 VAC, 50/60 Hz, 1 min (output/ground and output/internal logic); 500 VDC, 1 min (between channel groups) |
| Protection | Reverse polarity, short circuit, overload and overvoltage |
| Required External Fuse | 2 A fast-blow fuse per 16-channel group |
| IP Rating | IP20 |
| Protective Treatment | Standard version |
| MTBF | 150,000 hours |
| Net Weight | 0.15 kg |
| Country of Origin | USA |
| GTIN | 3595863910490 |
System Integration
The BMXDDO6402K belongs to the Modicon X80 common I/O platform, which is used with Modicon M340 and M580 programmable automation controllers. Its 64-channel configuration provides a high-density discrete output interface for rack-based control systems.
The module uses two 40-pin connectors for field output connections. The 64 channels are arranged in four groups of 16, with an external 2 A fast-blow fuse specified for each group. This grouping is important when planning field wiring and fault isolation.
Frequently Asked Questions
Q: What is the rated output current of the BMXDDO6402K?
A: The rated output current is 0.1 A per channel, with a maximum aggregate module current of 6.4 A. The total load must remain within the module limit even when multiple channels operate simultaneously.
Q: Can the BMXDDO6402K drive inductive loads?
A: The module supports transistor output switching, but the permissible switching frequency depends on load inductance and current. The specified frequency relationship is 0.5/LI² Hz. Check the load characteristics and manufacturer's switching limits before application.
Q: What external protection is required?
A: A 2 A fast-blow fuse is specified for each 16-channel group. The module also incorporates electronic overload, short-circuit, reverse-polarity and overvoltage protection.
Pembayaran: T/T, Western Union.
Pelabuhan penghantaran: Xiamen.
Tempoh penghantaran: Biasanya 1–3 hari bekerja selepas pengesahan pembayaran (tertakluk pada stok).
Penghantaran ke seluruh dunia: Kami menghantar alat ganti automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran akan disebut harga bersama RFQ anda.
Soalan Lazim
Soalan lazim tentang sebut harga, penghantaran, waranti dan pemulanganKlik Minta Sebut Harga pada halaman produk dan hantar nombor bahagian, kuantiti yang diperlukan serta negara destinasi kepada kami. Pasukan jualan kami akan membalas dengan ketersediaan semasa, harga dan anggaran masa penghantaran.
Item dalam stok biasanya disediakan selepas pembayaran dan pengesahan pesanan. Kebanyakan pesanan dihantar dari gudang kami di China, walaupun lokasi penghantaran mungkin berbeza bergantung pada stok semasa.
Ya. Kami menghantar komponen automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran dan masa transit bergantung pada destinasi, berat bungkusan, saiz produk dan keperluan import tempatan.
Kami biasanya menggunakan DHL, FedEx, UPS dan perkhidmatan kurier antarabangsa yang lain. Syarikat pengangkutan boleh dipilih berdasarkan destinasi, kelajuan penghantaran, saiz kiriman dan keperluan pelanggan.
Produk kami secara amnya dilindungi oleh waranti 12 bulan. Produk yang layak juga boleh dipulangkan di bawah polisi bayaran balik 30 hari kami. Sila hubungi pasukan kami sebelum memulangkan mana-mana item untuk mengesahkan terma yang berkenaan dan arahan pemulangan.
Anda mungkin juga suka
Siaran Blog
Berita automasi industri, panduan teknikal dan kemas kini produk.
