
Dimaklumkan melalui e-mel apabila produk ini tersedia semula
- Penerangan
- Reviews
- Penghantaran & Pembayaran
The Schneider Electric BMXNOM0200 is a Modicon X80 serial communication module equipped with two RS-232/RS-485 interfaces for Modbus and character-mode communication. It provides serial connectivity for Modicon M340 and M580 automation platforms, with RJ45 connections, internal rack power supply, and independent activity indicators for both serial ports.
Communication Interfaces and Protocols
The BMXNOM0200 provides two serial communication interfaces with different electrical configurations and transmission rates:
- RS-232: RJ45 connector, 115.2 kbps, 8-wire connection.
- RS-485: RJ45 connector, 57.6 kbps, one twisted-pair connection.
- Communication modes: Modbus and character mode (ASCII).
The two interfaces allow the controller to exchange data with serial field devices and equipment. RS-232 supports point-to-point serial communication, while RS-485 provides a differential signaling interface suitable for multidrop serial networks. The actual network topology and device configuration must follow the applicable communication requirements.
Modicon X80 Platform Integration
The BMXNOM0200 belongs to the Modicon X80 modular I/O and communication platform. It is compatible with Modicon M340 and M580 PLC systems, providing serial communication within these automation architectures.
The module receives its operating power internally through the rack backplane. Its current consumption is 80 mA at 24 VDC, so no separate external power connection is specified for the module itself.
Status Indication and Diagnostics
Four LEDs provide local operating and communication status:
- ERR (red): Indicates a module fault.
- RUN (green): Indicates that the module is operating.
- SER COM 0 (green): Indicates serial interface 0 activity.
- SER COM 1 (green): Indicates serial interface 1 activity.
These indicators help maintenance personnel distinguish module operating status from serial communication activity during troubleshooting.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXNOM0200 |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Serial Communication Interface Module |
| Communication Interfaces | 2 serial ports |
| Serial Interface 0 | RS-232, RJ45, 115.2 kbps, 8 wires |
| Serial Interface 1 | RS-485, RJ45, 57.6 kbps, 1 twisted pair |
| Communication Modes | Modbus, Character Mode (ASCII) |
| Power Supply | Internal power supply via module rack |
| Current Consumption | 80 mA at 24 VDC |
| Local Diagnostics | ERR, RUN, SER COM 0, SER COM 1 LEDs |
| Module Format | Standard |
| Conformal Coating | TC |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 10 to 95%, non-condensing |
| Weight | 0.23 kg |
| Certifications | CE, UL |
| Standards | UL 508, EN 61131-2, EN 61000-6-4, EN 61000-6-2, EN 61010-2-201 |
| EU Directives | 2014/35/EU, 2014/30/EU |
| EAN | 3595864024431 |
| Lifecycle Carbon Footprint | 101 kg CO2 eq. |
Installation and Environmental Conditions
The BMXNOM0200 uses the standard Modicon X80 module format and obtains power through the module rack. Its IP20 protection rating indicates that it is intended for installation inside an appropriate electrical enclosure rather than direct exposure to water or dust.
The specified operating temperature range is 0 to 60 deg C, with relative humidity between 10% and 95%, provided that condensation does not occur. The TC conformal coating designation identifies its climatic treatment configuration.
Frequently Asked Questions
Q: Which PLC platforms support the BMXNOM0200?
A: The BMXNOM0200 is specified for use with Schneider Electric Modicon M340 and M580 PLC platforms. Confirm the rack configuration and applicable platform documentation before installation.
Q: Can the two serial ports operate at different communication speeds?
A: Yes. The specified interface rates are 115.2 kbps for RS-232 and 57.6 kbps for RS-485. Each interface has its own physical connection and activity indicator.
Q: Does the BMXNOM0200 require an external 24 VDC power supply?
A: No separate external supply is specified. The module receives power internally through the rack backplane and has a stated current consumption of 80 mA at 24 VDC.
Pembayaran: T/T, Western Union.
Pelabuhan penghantaran: Xiamen.
Tempoh penghantaran: Biasanya 1–3 hari bekerja selepas pengesahan pembayaran (tertakluk pada stok).
Penghantaran ke seluruh dunia: Kami menghantar alat ganti automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran akan disebut harga bersama RFQ anda.
Soalan Lazim
Soalan lazim tentang sebut harga, penghantaran, waranti dan pemulanganKlik Minta Sebut Harga pada halaman produk dan hantar nombor bahagian, kuantiti yang diperlukan serta negara destinasi kepada kami. Pasukan jualan kami akan membalas dengan ketersediaan semasa, harga dan anggaran masa penghantaran.
Item dalam stok biasanya disediakan selepas pembayaran dan pengesahan pesanan. Kebanyakan pesanan dihantar dari gudang kami di China, walaupun lokasi penghantaran mungkin berbeza bergantung pada stok semasa.
Ya. Kami menghantar komponen automasi industri kepada pelanggan di seluruh dunia. Kos penghantaran dan masa transit bergantung pada destinasi, berat bungkusan, saiz produk dan keperluan import tempatan.
Kami biasanya menggunakan DHL, FedEx, UPS dan perkhidmatan kurier antarabangsa yang lain. Syarikat pengangkutan boleh dipilih berdasarkan destinasi, kelajuan penghantaran, saiz kiriman dan keperluan pelanggan.
Produk kami secara amnya dilindungi oleh waranti 12 bulan. Produk yang layak juga boleh dipulangkan di bawah polisi bayaran balik 30 hari kami. Sila hubungi pasukan kami sebelum memulangkan mana-mana item untuk mengesahkan terma yang berkenaan dan arahan pemulangan.
Anda mungkin juga suka
Siaran Blog
Berita automasi industri, panduan teknikal dan kemas kini produk.
