Przejdź do informacji o produkcie
1 z 3

Schneider BMXCPS3500H Modicon X80 Power Supply Module

18 w magazynie
  • Manufacturer: Schneider
  • Product No.: BMXCPS3500H
  • Country of origin: France
  • Product Type: Modicon X80 Power Supply Module
  • Condition: Fabrycznie nowy
  • Payment: T/T, Western Union
  • Weight: 0.36 kg
  • Shipping port: Xiamen
  • Warranty: 12 miesięcy
  • Opis
  • Reviews
  • Wysyłka i płatność

The Schneider Electric BMXCPS3500H is a Modicon X80 power supply module designed for severe environmental conditions. It converts a 100-240 V AC primary supply into the DC power required by the rack, processor, I/O modules and field sensors. Its configuration includes separate 3.3 V DC and 24 V DC secondary supply circuits, conformal coating and an extended operating temperature range.

Power Supply Configuration

The BMXCPS3500H provides separate secondary power circuits for rack electronics, I/O and processor loads, and sensor devices. Output capacity depends on the operating temperature range, so the applicable power ratings must be considered when calculating the rack power budget.

  • 3.3 V DC: Supplies internal logic power to I/O modules.
  • 24 V DC: Supplies the I/O modules and processor.
  • 24 V DC sensor supply: Provides power for connected field sensors.

At ambient temperatures from 0 to 60 deg C, the specified secondary power ratings are higher than those available across the extended -25 to 70 deg C operating range. This distinction is important when configuring a rack for high-temperature or low-temperature service.

Electrical Protection and Diagnostics

The primary circuit has an internal fuse that is not accessible for replacement. The secondary circuits include overload, overvoltage and short-circuit protection.

Two green status LEDs indicate rack voltage OK and sensor voltage status. A front-panel RESET push-button initiates a cold restart, providing a local means of restarting the power supply.

Backplane and Electrical Connections

The module has a 5-pin connector for line supply, protective earth and the 24 V DC sensor input, together with a separate 2-pin alarm relay connector. The backplane compatibility restriction is important for replacement selection: BMXCPS3500H is not compatible with BMEXBP..02 backplanes.

Technical Specifications

Parameter Specification
Model BMXCPS3500H
Brand Schneider Electric
Product Range Modicon X80
Product Type Power Supply Module
Application Severe environments
Primary Voltage 100-240 V AC
Primary Voltage Limits 85-264 V AC
Network Frequency 50/60 Hz
Frequency Limits 47-63 Hz
Apparent Power 0.12 kVA
Input Current 0.52 A at 240 V; 1.04 A at 115 V
Inrush Current 30 A at 120 V; 60 A at 240 V
3.3 V DC Logic Supply 15 W at 0 to 60 deg C; 11.3 W at -25 to 70 deg C
24 V DC I/O and Processor Supply 31.2 W at 0 to 60 deg C; 23.4 W at -25 to 70 deg C
24 V DC Sensor Supply 21.6 W at 0 to 60 deg C; 16.2 W at -25 to 70 deg C
Maximum Output Current 4.5 A at 3.3 V DC; 1.3 A at 24 V DC for I/O and processor; 0.9 A for sensor supply
Maximum Power Dissipation 8.5 W
Protection Primary internal fuse; secondary overload, overvoltage and short-circuit protection
Backplane Compatibility Not compatible with BMEXBP..02
Electrical Connections 5-pin line supply connector; 2-pin alarm relay connector
Status Indicators Green rack voltage OK LED; green sensor voltage LED
Reset Function RESET push-button, cold restart
IP Rating IP20
Operating Temperature -25 to +70 deg C
Storage Temperature -40 to +85 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Protective Treatment Conformal coating
Vibration Resistance 3 gn
Shock Resistance 30 gn
Immunity to Microbreaks 1 ms
Operating Altitude 0-2000 m; 2000-5000 m with derating
Insulation Resistance >= 100 Mohm, primary to ground and primary to secondary
Dielectric Strength 1500 V primary/secondary for logic and I/O supplies; 2300 V for sensor supply
Weight 0.36 kg
Country of Origin United States
GTIN 3595864029894

Environmental Resistance

The BMXCPS3500H has conformal coating and environmental resistance classifications for operation in demanding industrial environments.

Its documented environmental characteristics include:

  • Gas resistance: Class Gx, ISA S71.04.
  • Gas resistance: Class 3C4, IEC 60721-3-3.
  • Dust and sand resistance: Class 3S4, IEC 60721-3-3.
  • Mold and fungal spore resistance: Class 3B2, IEC 60721-3-3.
  • Salt resistance: Level 2, IEC 68252.
  • Hazardous location classification: Class I, Division 2.

Frequently Asked Questions

Q: Can the BMXCPS3500H operate at temperatures below 0 deg C?

A: Yes. Its specified operating temperature range extends from -25 to +70 deg C. However, the available secondary power ratings are reduced compared with operation between 0 and 60 deg C.

Q: Is the BMXCPS3500H compatible with all Modicon X80 backplanes?

A: No. The specified compatibility restriction excludes BMEXBP..02 backplanes. Check the exact backplane reference before selecting this module as a replacement.

Q: What happens if a secondary power circuit experiences an overload or short circuit?

A: The secondary circuits include overload, overvoltage and short-circuit protection. The module also provides separate rack voltage and sensor voltage status indicators for local diagnosis.

Płatność: T/T, Western Union.

Port wysyłki: Xiamen.

Czas realizacji: Zazwyczaj 1–3 dni robocze po potwierdzeniu płatności (w zależności od dostępności).

Dostawa na cały świat: Wysyłamy części do automatyki przemysłowej klientom na całym świecie. Koszt transportu jest podawany wraz z wyceną na podstawie zapytania ofertowego.

Najczęściej zadawane pytania

Często zadawane pytania dotyczące wycen, wysyłki, gwarancji i zwrotów

Na stronie produktu kliknij Poproś o wycenę i prześlij nam numer części, wymaganą ilość oraz kraj docelowy. Nasz zespół sprzedaży odpowie, podając aktualną dostępność, cenę i szacowany czas dostawy.

Produkty dostępne w magazynie są zazwyczaj przygotowywane po dokonaniu płatności i potwierdzeniu zamówienia. Większość zamówień jest wysyłana z naszego magazynu w Chinach, choć miejsce wysyłki może się różnić w zależności od aktualnego stanu magazynowego.

Tak. Wysyłamy części do automatyki przemysłowej klientom na całym świecie. Koszt wysyłki i czas transportu zależą od miejsca docelowego, wagi przesyłki, rozmiaru produktu oraz lokalnych wymogów importowych.

Najczęściej korzystamy z usług DHL, FedEx, UPS i innych międzynarodowych firm kurierskich. Przewoźnika można wybrać w zależności od miejsca docelowego, szybkości dostawy, rozmiaru przesyłki i wymagań klienta.

Nasze produkty są zazwyczaj objęte 12-miesięczną gwarancją. Produkty spełniające odpowiednie warunki można również zwrócić zgodnie z naszą 30-dniową polityką zwrotu pieniędzy. Przed zwrotem dowolnego produktu skontaktuj się z naszym zespołem, aby potwierdzić obowiązujące warunki i instrukcje dotyczące zwrotu.

Products FAQs

Możesz też polubić