Przejdź do informacji o produkcie
1 z 3

Schneider BMXCPS4022S Modicon X80 Safety Power Supply Module

18 w magazynie
  • Manufacturer: Schneider
  • Product No.: BMXCPS4022S
  • Country of origin: France
  • Product Type: Modicon X80 Safety Power Supply Module
  • Condition: Fabrycznie nowy
  • Payment: T/T, Western Union
  • Weight: 0.81 kg
  • Shipping port: Xiamen
  • Warranty: 12 miesięcy
  • Opis
  • Reviews
  • Wysyłka i płatność

The BMXCPS4022S is a Schneider Electric Modicon X80 safety power supply module designed for redundant power architectures in industrial automation systems. It accepts a 24-48 VDC primary supply and provides separate 24 VDC and 3.3 VDC secondary outputs for X80 I/O module logic and processor power. Network-based diagnostics provide information on redundancy status, operating time and remaining service life.

Power Supply Function and Redundant Architecture

The BMXCPS4022S supplies the internal power rails required by Modicon X80 system modules. Its two secondary supply outputs serve different electrical loads: the 24 VDC output supplies the I/O module power circuit, while the 3.3 VDC output supplies I/O module logic and processor circuitry.

The module supports redundant power architectures. Its diagnostic functions include redundancy testing and monitoring of remaining operating life, temperature and operating time. These functions provide maintenance information for assessing the power supply condition and planning replacement.

Electrical Protection and Status Monitoring

The secondary circuits incorporate overload, overvoltage and short-circuit protection. These protections address abnormal conditions on the module's output side; they should not be interpreted as a substitute for external protection of the primary supply circuit.

Three green LED indicators provide local status information:

  • Voltage OK: indicates that the required voltages are present.
  • Redundancy OK: indicates the redundancy status.
  • Power supply status: indicates the module's power supply condition.

A RESET button supports a cold restart. The module also provides an alarm relay connection for external status signalling.

Electrical Specifications

The output power allocation must be considered when calculating the rack power budget. The 40 W rating on the 24 VDC rail applies when the 3.3 VDC output is not loaded; the available power on both rails must remain within the module's total power capacity.

Parameter Specification
Model BMXCPS4022S
Brand Schneider Electric
Product Range Modicon X80
Product Type Safety Power Supply Module
Primary Voltage 24-48 VDC
Primary Voltage Limit 18-62.4 VDC
Supply Circuit DC
Input Current 1.9 A at 24 V; 1 A at 48 V
Inrush Current 60 A at 24 V; 60 A at 48 V
Secondary Output 1 3.3 VDC, 18 W
Secondary Output 2 24 VDC, 40 W
Secondary Current 5 A at 3.3 VDC; 1.67 A at 24 VDC
Maximum Power Dissipation 8.5 W
MTBF 721,000 hours
Primary Circuit Protection Internal, inaccessible fuse
Secondary Circuit Protection Overload, overvoltage and short-circuit protection
Electrical Connection 5-pin power supply connector and protective earth; 2-pin alarm relay connector
Reset Function Cold-start RESET pushbutton
Dielectric Strength 1,500 V primary/ground; 1,500 V primary/secondary
Insulation Resistance >= 100 MOhm primary/ground; >= 100 MOhm primary/secondary
Power Interruption Immunity 1 ms
Protection Rating IP20
Operating Temperature -25 to 60 deg C (source discrepancy; see editorial note)
Storage Temperature -40 to 85 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Operating Altitude 0-2,000 m; derating required from 2,000 to 5,000 m
Vibration Resistance 3 Gn
Shock Resistance 15 Gn
Protective Treatment Conformal coating
Weight 0.81 kg
Certifications CE, UL, CSA, RCM, EAC, ATEX Zone 2/22, IECEx Zone 2/22, TÜV, Marine
Standards IEC 61131-2, IEC 61010-2-201, UL 61010-2-201, CSA C22.2 No. 61010-2-201, IACS E10
EAN 3606489562496

Installation and Electrical Connections

The BMXCPS4022S is designed for installation in a Modicon X80 module rack. It occupies the dedicated power supply position marked CPS and is secured to the rack using two screws.

The package includes two removable caged terminal blocks: one 5-way connector for the DC supply and protective earth, and one 2-way connector for the alarm relay. The module has an IP20 enclosure rating and is intended for installation inside a suitable equipment enclosure.

Environmental and Certification Requirements

The module has a conformal protective coating and specified resistance to gas, dust, sand, salt and mould-related environmental conditions. Its environmental classifications include gas resistance class Gx under ISA S71.04, class 3C4 under IEC 60721-3-3, and dust and sand resistance class 3S4.

The listed hazardous-location classifications include Class I Division 2, ATEX Zone 2/22 and IECEx Zone 2/22. Actual installation approval must be checked against the applicable certificate, equipment configuration and site requirements.

Frequently Asked Questions

Q: Can the BMXCPS4022S operate in a redundant power supply configuration?

A: Yes. It is designed for redundant power architectures and provides redundancy diagnostics, including redundancy testing and status monitoring. The system configuration must account for the power requirements of both supply modules.

Q: Can the 3.3 VDC and 24 VDC outputs deliver their maximum rated power simultaneously?

A: The output ratings must be evaluated against the total available power budget. The 40 W rating on the 24 VDC output applies when the 3.3 VDC output is not loaded. Do not calculate the two output ratings as independent power capacities.

Q: What does the RESET button do on this module?

A: The RESET button initiates a cold restart of the rack. This reinitializes the rack modules and, when installed in the main local rack, also reinitializes the CPU. The operation can cause I/O modules to transition to their initialized state, so its use should be coordinated with the control system operating procedure.

Płatność: T/T, Western Union.

Port wysyłki: Xiamen.

Czas realizacji: Zazwyczaj 1–3 dni robocze po potwierdzeniu płatności (w zależności od dostępności).

Dostawa na cały świat: Wysyłamy części do automatyki przemysłowej klientom na całym świecie. Koszt transportu jest podawany wraz z wyceną na podstawie zapytania ofertowego.

Najczęściej zadawane pytania

Często zadawane pytania dotyczące wycen, wysyłki, gwarancji i zwrotów

Na stronie produktu kliknij Poproś o wycenę i prześlij nam numer części, wymaganą ilość oraz kraj docelowy. Nasz zespół sprzedaży odpowie, podając aktualną dostępność, cenę i szacowany czas dostawy.

Produkty dostępne w magazynie są zazwyczaj przygotowywane po dokonaniu płatności i potwierdzeniu zamówienia. Większość zamówień jest wysyłana z naszego magazynu w Chinach, choć miejsce wysyłki może się różnić w zależności od aktualnego stanu magazynowego.

Tak. Wysyłamy części do automatyki przemysłowej klientom na całym świecie. Koszt wysyłki i czas transportu zależą od miejsca docelowego, wagi przesyłki, rozmiaru produktu oraz lokalnych wymogów importowych.

Najczęściej korzystamy z usług DHL, FedEx, UPS i innych międzynarodowych firm kurierskich. Przewoźnika można wybrać w zależności od miejsca docelowego, szybkości dostawy, rozmiaru przesyłki i wymagań klienta.

Nasze produkty są zazwyczaj objęte 12-miesięczną gwarancją. Produkty spełniające odpowiednie warunki można również zwrócić zgodnie z naszą 30-dniową polityką zwrotu pieniędzy. Przed zwrotem dowolnego produktu skontaktuj się z naszym zespołem, aby potwierdzić obowiązujące warunki i instrukcje dotyczące zwrotu.

Products FAQs

Możesz też polubić