Przejdź do informacji o produkcie
1 z 3

Schneider BMXDDM16025H Modicon X80 Discrete I/O Module

18 w magazynie
  • Manufacturer: Schneider
  • Product No.: BMXDDM16025H
  • Country of origin: France
  • Product Type: Modicon X80 Discrete I/O Module
  • Condition: Fabrycznie nowy
  • Payment: T/T, Western Union
  • Weight: 168 g
  • Shipping port: Xiamen
  • Warranty: 12 miesięcy
  • Opis
  • Reviews
  • Wysyłka i płatność

The Schneider Electric BMXDDM16025H is a Modicon X80 discrete I/O module with 8 DC inputs and 8 relay outputs. It combines 24 VDC input signal monitoring with relay-based output switching in a single module. Its conformal coating and severe-environment classification distinguish this version from standard-treatment configurations.

Input and Output Configuration

The module provides two different signal interfaces within one I/O unit:

  • 8 discrete inputs: 24 VDC positive logic, current-sinking input type.
  • 8 relay outputs: Isolated relay contacts for switching DC or AC loads.
  • Input current: 3.5 mA per channel.
  • Input impedance: 6,800 Ohm.
  • Input channels cannot be connected in parallel.

The inputs receive signals from field sensors, while the relay outputs switch external loads through their respective output circuits. This arrangement allows the controller to monitor discrete field states and operate relay-controlled devices using the same module.

Input Signal Characteristics

The 24 VDC inputs support 2-wire and 3-wire proximity sensors conforming to IEC 60947-5-2 and IEC 61131-2 Type 3 requirements. The guaranteed input thresholds are:

  • Logic state 1: At least 11 V and 2 mA.
  • Logic state 0: Maximum 5 V and 1.5 mA.
  • Typical response time: 4 ms.
  • Maximum response time: 7 ms.

These thresholds define the signal levels required for reliable input-state recognition. The module also provides reverse-polarity protection on the input side.

Relay Output Characteristics

The eight relay outputs support both DC and AC switching applications.

  • DC operating voltage: 19-30 VDC.
  • AC operating voltage: 19-264 VAC.
  • Maximum output current: 2 A.
  • Output activation response:

Technical Specifications

Parameter Specification
Model BMXDDM16025H
Brand Schneider Electric
Product Range Modicon X80
Product Type Discrete I/O Module
Application Severe environments
Discrete Inputs 8
Input Voltage 24 VDC
Input Type Current sink, positive logic
Input Current 3.5 mA
Input Impedance 6,800 Ohm
Discrete Outputs 8
Output Type Relay
DC Output Voltage 19-30 VDC
AC Output Voltage 19-264 VAC
Maximum Output Current 2 A
Typical Input Response Time 4 ms
Maximum Input Response Time 7 ms
Output Activation Time 10 MOhm at 500 VDC
Dielectric Strength 1,500 VAC, primary/secondary; 2,830 VAC, output relay; 500 VDC, between I/O groups
External Input Fuse 0.5 A fast-blow per input group
Output Protection External fast-blow fuse per output channel or group
Protective Treatment Conformal coating
Operating Temperature -25 to 70 deg C
Relative Humidity 5-95% at 55 deg C, non-condensing
Environmental Protection IP20
Gas Resistance Gx, 3C4
Dust and Sand Resistance 3S4
Salt Resistance Level 2
Mold and Fungal Spore Resistance 3B2
Net Weight 0.135 kg
Package Dimensions 12.0 x 11.0 x 5.5 cm
Package Weight 168 g
Lifecycle Carbon Footprint 35 kg CO2 eq.

Frequently Asked Questions

Q: What is the difference between BMXDDM16025H and BMXDDM16025?

A: Both models provide 8 x 24 VDC positive logic inputs and 8 relay outputs. The BMXDDM16025H is the hardened version, featuring conformal coating and an extended operating temperature range of -25 to 70 deg C.

Q: Can the relay outputs switch both AC and DC loads?

A: Yes. The relay outputs support 19-30 VDC and 19-264 VAC operating ranges, with a maximum output current of 2 A. The connected load must remain within the applicable voltage and current ratings.

Q: Can the eight input channels be connected in parallel?

A: No. Input paralleling is not permitted. Each input channel should receive its own correctly wired field signal.

Płatność: T/T, Western Union.

Port wysyłki: Xiamen.

Czas realizacji: Zazwyczaj 1–3 dni robocze po potwierdzeniu płatności (w zależności od dostępności).

Dostawa na cały świat: Wysyłamy części do automatyki przemysłowej klientom na całym świecie. Koszt transportu jest podawany wraz z wyceną na podstawie zapytania ofertowego.

Najczęściej zadawane pytania

Często zadawane pytania dotyczące wycen, wysyłki, gwarancji i zwrotów

Na stronie produktu kliknij Poproś o wycenę i prześlij nam numer części, wymaganą ilość oraz kraj docelowy. Nasz zespół sprzedaży odpowie, podając aktualną dostępność, cenę i szacowany czas dostawy.

Produkty dostępne w magazynie są zazwyczaj przygotowywane po dokonaniu płatności i potwierdzeniu zamówienia. Większość zamówień jest wysyłana z naszego magazynu w Chinach, choć miejsce wysyłki może się różnić w zależności od aktualnego stanu magazynowego.

Tak. Wysyłamy części do automatyki przemysłowej klientom na całym świecie. Koszt wysyłki i czas transportu zależą od miejsca docelowego, wagi przesyłki, rozmiaru produktu oraz lokalnych wymogów importowych.

Najczęściej korzystamy z usług DHL, FedEx, UPS i innych międzynarodowych firm kurierskich. Przewoźnika można wybrać w zależności od miejsca docelowego, szybkości dostawy, rozmiaru przesyłki i wymagań klienta.

Nasze produkty są zazwyczaj objęte 12-miesięczną gwarancją. Produkty spełniające odpowiednie warunki można również zwrócić zgodnie z naszą 30-dniową polityką zwrotu pieniędzy. Przed zwrotem dowolnego produktu skontaktuj się z naszym zespołem, aby potwierdzić obowiązujące warunki i instrukcje dotyczące zwrotu.

Products FAQs

Możesz też polubić