{"product_id":"honeywell-fs-tsdo-04uni-safe-digital-output-module","title":"Honeywell FS-TSDO-04UNI Safe Digital Output Module","description":"\u003cp\u003eThe Honeywell FS-TSDO-04UNI is identified in the supplied product information as a four-channel safe digital output module. It is intended for digital output control in safety-related automation systems. The provided description lists diagnostic capabilities and configurable response behavior, but does not establish the electrical output ratings, safety certification, response time, or compatible controller platform.\u003c\/p\u003e\n\u003ch3\u003eFunction and Signal Interface\u003c\/h3\u003e\n\u003cp\u003eThe FS-TSDO-04UNI is a Field Termination Assembly (FTA), rather than a standalone digital output controller. It connects a system interconnection cable to external field wiring through screw terminals, providing the physical interface between compatible safe digital output modules and field devices.\u003c\/p\u003e\n\u003cp\u003eThe four output channels support field circuits operating at nominal DC voltage levels of 24 V, 48 V, and 110 V, subject to the connected output module's specifications. The FTA terminates the signals and wiring; output switching capability and actual load current depend on the connected output hardware.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eFS-TSDO-04UNI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eSafe Digital Output Field Termination Assembly (FTA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Channels\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Field Voltage Levels\u003c\/td\u003e\n\u003ctd\u003e24 VDC, 48 VDC, 60 VDC, 110 VDC (document-dependent; verify against the applicable hardware revision)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Continuous Current per Channel\u003c\/td\u003e\n\u003ctd\u003e2 A; actual maximum current is defined by the connected output module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Voltage\u003c\/td\u003e\n\u003ctd\u003e50 VDC, overvoltage category III; 150 VDC, overvoltage category II\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eField Wiring Connection\u003c\/td\u003e\n\u003ctd\u003eScrew terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Wire Diameter\u003c\/td\u003e\n\u003ctd\u003e2.5 mm2 (AWG 14)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Strip Length\u003c\/td\u003e\n\u003ctd\u003e7 mm (0.28 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTerminal Tightening Torque\u003c\/td\u003e\n\u003ctd\u003e0.5 Nm (0.37 ft-lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDIN EN rail, TS32 or TS35 x 7.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Dimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e60 x 70 x 54 mm (2.36 x 2.76 x 2.13 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUsed Rail Length\u003c\/td\u003e\n\u003ctd\u003e61 mm (2.40 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003cp\u003eSource: Honeywell Safety Manager hardware documentation and published FS-TSDO-04UNI technical data. Voltage-level descriptions vary across document revisions.Connection and Installation\u003c\/p\u003e\n\u003cp\u003eThe FTA uses a DIN rail snap-in mounting arrangement and screw terminals for field wiring. Its physical interface allows field conductors to be terminated separately from the system interconnection cable, which connects the assembly to the output modules.\u003c\/p\u003e\n\u003cp\u003ePublished documentation identifies connections to compatible SDO-04x or SDOL-04x safe digital output modules through the system interconnection cable. Confirm the cable part number and channel assignment against the installed Safety Manager or FSC hardware revision before replacement.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the FS-TSDO-04UNI itself a digital output switching module?\u003c\/p\u003e\n\u003cp\u003eA: No. It is a field termination assembly that connects compatible digital output hardware to external field wiring. The connected output module determines the switching behavior and allowable load current.\u003c\/p\u003e\n\u003cp\u003eQ: What field voltage levels does the FS-TSDO-04UNI support?\u003c\/p\u003e\n\u003cp\u003eA: Published descriptions list 24 VDC, 48 VDC, 60 VDC, and 110 VDC. However, voltage listings differ across documents, and the applicable limits also depend on the connected output module. Verify the hardware revision and electrical ratings before connecting field loads.\u003c\/p\u003e\n\u003cp\u003eQ: What should be checked when replacing this assembly?\u003c\/p\u003e\n\u003cp\u003eA: Check the full model number, the interconnection cable, the connected SDO-04x or SDOL-04x output module configuration, and the field wiring. Also verify terminal wire size, strip length, tightening torque, and the applicable voltage limits before energizing the circuit.\u003c\/p\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":52750302609693,"sku":"FS-TSDO-04UNI 51305900-176","price":9.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/5387\/3181\/files\/FS-TSDO-04UNI1_1000_ece6b4c0-e937-4c56-9a02-c2ff260b2e03.jpg?v=1787041292","url":"https:\/\/www.6gcontrols.com\/products\/honeywell-fs-tsdo-04uni-safe-digital-output-module","provider":"6G Controls","version":"1.0","type":"link"}