{"product_id":"schneider-electric-bmxnrp0201-modicon-x80-fiber-optic-repeater","title":"Schneider Electric BMXNRP0201 Modicon X80 Fiber Optic Repeater","description":"\u003cp\u003eThe \u003cstrong\u003eBMXNRP0201\u003c\/strong\u003e is a Modicon X80 fiber optic repeater designed to extend Ethernet communication over single-mode optical fiber. It provides two 100BASE-TX RJ45 ports and two 100BASE-FX fiber ports, supporting optical transmission distances of up to 15 km at a wavelength of 1310 nm. The module operates on a 24 V supply and supports Ethernet communication in Modicon automation architectures.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eEthernet and Fiber Optic Communication\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe BMXNRP0201 converts Ethernet communication between copper and optical fiber interfaces. Its two RJ45 ports support 100BASE-TX, while the two fiber ports support 100BASE-FX in accordance with IEEE 802.3u.\u003c\/p\u003e\n\u003cp\u003eThe single-mode fiber interface allows Ethernet links to extend beyond the distance limitations of conventional copper cabling. The specified operating distance is 0 to 15,000 m, making the module suitable for communication links between separated automation equipment where optical fiber is required.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eOptical Interface Characteristics\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe optical interface operates at 1310 nm and specifies attenuation of -15 to -8 dB for 9\/125 um fiber. The receiver sensitivity range is -31 to -8 dBm, and the signal rise\/fall time is 2.5 ns.\u003c\/p\u003e\n\u003cp\u003eThese optical parameters are relevant when checking fiber type, link attenuation and receiver operating conditions. The actual achievable transmission distance depends on the optical link budget and the characteristics of the installed fiber and connectors.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePower Supply and Status Indication\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe module uses a rated supply voltage of 24 V. Its typical current consumption is 140 mA, with a maximum of 200 mA. Local LED indicators provide information about the power supply, fault status, Ethernet connections and fiber link activity.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 green LED for power supply status.\u003c\/li\u003e\n\u003cli\u003e1 red LED for fault indication (ERR).\u003c\/li\u003e\n\u003cli\u003e2 green LEDs for Ethernet link status.\u003c\/li\u003e\n\u003cli\u003e2 green LEDs for fiber connection status and activity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eInstallation and System Integration\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe BMXNRP0201 belongs to the Schneider Electric Modicon X80 range, which provides a common I\/O and communication hardware platform for Modicon automation architectures. The module is specified for use with Modicon M340 and M580 systems.\u003c\/p\u003e\n\u003cp\u003eIt is installed in a module rack and secured with two screws. The product documentation also identifies Ethernet interlink cables as the connection method for CRA drop adapters. Its specified hot-swap capability supports module replacement within an appropriately configured system; the applicable rack and system replacement procedures should still be observed.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eBMXNRP0201\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSchneider Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFiber Optic Repeater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Series\u003c\/td\u003e\n\u003ctd\u003eModicon X80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiber Type\u003c\/td\u003e\n\u003ctd\u003eSingle-mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Voltage\u003c\/td\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical Current Consumption\u003c\/td\u003e\n\u003ctd\u003e140 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Current Consumption\u003c\/td\u003e\n\u003ctd\u003e200 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCopper Ethernet Ports\u003c\/td\u003e\n\u003ctd\u003e2 x RJ45, 100BASE-TX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFiber Ethernet Ports\u003c\/td\u003e\n\u003ctd\u003e2 x 100BASE-FX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Standard\u003c\/td\u003e\n\u003ctd\u003eIEEE 802.3u\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptical Wavelength\u003c\/td\u003e\n\u003ctd\u003e1310 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Distance\u003c\/td\u003e\n\u003ctd\u003e0-15,000 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptical Attenuation\u003c\/td\u003e\n\u003ctd\u003e-15 to -8 dB (9\/125 um)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReceiver Sensitivity\u003c\/td\u003e\n\u003ctd\u003e-31 to -8 dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRise\/Fall Time\u003c\/td\u003e\n\u003ctd\u003e2.5 ns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric Strength\u003c\/td\u003e\n\u003ctd\u003e1400 V DC between field and bus; 500 V DC between channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHot-Swap Capability\u003c\/td\u003e\n\u003ctd\u003eSupported\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e32 x 100 x 86 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e203 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-40 to 70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd\u003e0 to 95%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Altitude\u003c\/td\u003e\n\u003ctd\u003e0-4000 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironmental Carbon Footprint\u003c\/td\u003e\n\u003ctd\u003e167 kg CO2 eq.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE, RCM, CSA, EAC, Merchant Navy, UL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eIEC 61010-2-201, IEC 61131-2, UL 61010-2-201, CSA C22.2 No. 61010-2-201\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e3595864144467\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the difference between the BMXNRP0201 copper and fiber ports?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: The two RJ45 ports provide 100BASE-TX Ethernet connections over copper, while the two 100BASE-FX ports provide Ethernet communication over single-mode optical fiber. This arrangement allows copper-based Ethernet equipment to communicate through an optical link.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What fiber type and wavelength does the BMXNRP0201 require?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: The specified fiber type is single-mode, with a nominal wavelength of 1310 nm and optical attenuation parameters based on 9\/125 um fiber. Fiber and connector specifications should be checked against the optical link requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does the BMXNRP0201 support hot swapping?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA: Yes. Schneider Electric lists hot swap as an available function for this module. Replacement must follow the applicable Modicon X80 rack and system procedures.\u003c\/p\u003e","brand":"Schneider","offers":[{"title":"Default Title","offer_id":68137382084893,"sku":"BMXNRP0201","price":9.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/5387\/3181\/files\/BMXNRP0201.jpg?v=1795168201","url":"https:\/\/www.6gcontrols.com\/ru\/products\/schneider-electric-bmxnrp0201-modicon-x80-fiber-optic-repeater","provider":"6G Controls","version":"1.0","type":"link"}