
แจ้งเตือนทางอีเมลเมื่อสินค้านี้พร้อมจำหน่าย
- คำอธิบาย
- Reviews
- การจัดส่งและการชำระเงิน
The Schneider Electric BMXDDM16025H is a Modicon X80 discrete I/O module with 8 DC inputs and 8 relay outputs. It combines 24 VDC input signal monitoring with relay-based output switching in a single module. Its conformal coating and severe-environment classification distinguish this version from standard-treatment configurations.
Input and Output Configuration
The module provides two different signal interfaces within one I/O unit:
- 8 discrete inputs: 24 VDC positive logic, current-sinking input type.
- 8 relay outputs: Isolated relay contacts for switching DC or AC loads.
- Input current: 3.5 mA per channel.
- Input impedance: 6,800 Ohm.
- Input channels cannot be connected in parallel.
The inputs receive signals from field sensors, while the relay outputs switch external loads through their respective output circuits. This arrangement allows the controller to monitor discrete field states and operate relay-controlled devices using the same module.
Input Signal Characteristics
The 24 VDC inputs support 2-wire and 3-wire proximity sensors conforming to IEC 60947-5-2 and IEC 61131-2 Type 3 requirements. The guaranteed input thresholds are:
- Logic state 1: At least 11 V and 2 mA.
- Logic state 0: Maximum 5 V and 1.5 mA.
- Typical response time: 4 ms.
- Maximum response time: 7 ms.
These thresholds define the signal levels required for reliable input-state recognition. The module also provides reverse-polarity protection on the input side.
Relay Output Characteristics
The eight relay outputs support both DC and AC switching applications.
- DC operating voltage: 19-30 VDC.
- AC operating voltage: 19-264 VAC.
- Maximum output current: 2 A.
- Output activation response:
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDM16025H |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Discrete I/O Module |
| Application | Severe environments |
| Discrete Inputs | 8 |
| Input Voltage | 24 VDC |
| Input Type | Current sink, positive logic |
| Input Current | 3.5 mA |
| Input Impedance | 6,800 Ohm |
| Discrete Outputs | 8 |
| Output Type | Relay |
| DC Output Voltage | 19-30 VDC |
| AC Output Voltage | 19-264 VAC |
| Maximum Output Current | 2 A |
| Typical Input Response Time | 4 ms |
| Maximum Input Response Time | 7 ms |
| Output Activation Time | 10 MOhm at 500 VDC |
| Dielectric Strength | 1,500 VAC, primary/secondary; 2,830 VAC, output relay; 500 VDC, between I/O groups |
| External Input Fuse | 0.5 A fast-blow per input group |
| Output Protection | External fast-blow fuse per output channel or group |
| Protective Treatment | Conformal coating |
| Operating Temperature | -25 to 70 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Environmental Protection | IP20 |
| Gas Resistance | Gx, 3C4 |
| Dust and Sand Resistance | 3S4 |
| Salt Resistance | Level 2 |
| Mold and Fungal Spore Resistance | 3B2 |
| Net Weight | 0.135 kg |
| Package Dimensions | 12.0 x 11.0 x 5.5 cm |
| Package Weight | 168 g |
| Lifecycle Carbon Footprint | 35 kg CO2 eq. |
Frequently Asked Questions
Q: What is the difference between BMXDDM16025H and BMXDDM16025?
A: Both models provide 8 x 24 VDC positive logic inputs and 8 relay outputs. The BMXDDM16025H is the hardened version, featuring conformal coating and an extended operating temperature range of -25 to 70 deg C.
Q: Can the relay outputs switch both AC and DC loads?
A: Yes. The relay outputs support 19-30 VDC and 19-264 VAC operating ranges, with a maximum output current of 2 A. The connected load must remain within the applicable voltage and current ratings.
Q: Can the eight input channels be connected in parallel?
A: No. Input paralleling is not permitted. Each input channel should receive its own correctly wired field signal.
การชำระเงิน: T/T, Western Union
ท่าเรือขนส่ง: เซี่ยเหมิน
ระยะเวลาดำเนินการ: โดยทั่วไป 1–3 วันทำการหลังยืนยันการชำระเงิน (ขึ้นอยู่กับสินค้าในสต็อก)
จัดส่งทั่วโลก: เราจัดส่งชิ้นส่วนระบบอัตโนมัติทางอุตสาหกรรมให้แก่ลูกค้าทั่วโลก โดยจะแจ้งค่าขนส่งพร้อมใบขอใบเสนอราคาของคุณ
คำถามที่พบบ่อย
คำถามที่พบบ่อยเกี่ยวกับใบเสนอราคา การจัดส่ง การรับประกัน และการคืนสินค้าคลิก ขอใบเสนอราคา ในหน้าสินค้า แล้วส่งหมายเลขชิ้นส่วน จำนวนที่ต้องการ และประเทศปลายทางให้เรา ทีมฝ่ายขายของเราจะตอบกลับพร้อมข้อมูลสินค้าที่มีจำหน่าย ราคา และระยะเวลาจัดส่งโดยประมาณ
สินค้าที่มีอยู่ในสต็อกโดยปกติจะจัดเตรียมหลังจากได้รับการชำระเงินและยืนยันคำสั่งซื้อแล้ว คำสั่งซื้อส่วนใหญ่จัดส่งจากคลังสินค้าของเราในประเทศจีน แต่สถานที่จัดส่งอาจแตกต่างกันไปตามสต็อกปัจจุบัน
ใช่ เราจัดส่งชิ้นส่วนระบบอัตโนมัติทางอุตสาหกรรมให้ลูกค้าทั่วโลก ค่าจัดส่งและระยะเวลาในการขนส่งขึ้นอยู่กับปลายทาง น้ำหนักพัสดุ ขนาดสินค้า และข้อกำหนดการนำเข้าของท้องถิ่น
เราใช้บริการ DHL, FedEx, UPS และบริษัทขนส่งระหว่างประเทศอื่น ๆ เป็นประจำ โดยสามารถเลือกผู้ให้บริการขนส่งได้ตามปลายทาง ความเร็วในการจัดส่ง ขนาดของพัสดุ และความต้องการของลูกค้า
โดยทั่วไป สินค้าของเราครอบคลุมการรับประกัน 12 เดือน สินค้าที่มีสิทธิ์ยังสามารถส่งคืนได้ภายใต้นโยบายคืนเงินภายใน 30 วัน โปรดติดต่อทีมงานของเราก่อนส่งคืนสินค้าใด ๆ เพื่อยืนยันข้อกำหนดที่ใช้บังคับและคำแนะนำในการส่งคืน
คุณอาจชอบสิ่งเหล่านี้ด้วย
บทความในบล็อก
ข่าวสารระบบอัตโนมัติในภาคอุตสาหกรรม คู่มือด้านเทคนิค และอัปเดตผลิตภัณฑ์
