ข้ามไปยังข้อมูลผลิตภัณฑ์
1 ของ 3

Schneider BMXDRA0815 Modicon X80 Relay Output Module

มีสินค้า 18 ชิ้น ทดลองใช้ฟรี
  • Manufacturer: Schneider
  • Product No.: BMXDRA0815
  • Country of origin: France
  • Product Type: Modicon X80 Relay Output Module
  • Condition: ใหม่เอี่ยม
  • Payment: T/T, เวสเทิร์น ยูเนียน
  • Weight: 0.169 kg
  • Shipping port: เซี่ยเหมิน
  • Warranty: 12 เดือน
  • คำอธิบาย
  • Reviews
  • การจัดส่งและการชำระเงิน

The BMXDRA0815 is an 8-channel discrete relay output module in the Schneider Electric Modicon X80 range. It provides eight electrically isolated normally open (NO) relay outputs for switching AC or DC loads. The module supports rated load voltages of 24-240 V AC and 24-125 V DC, with positive output logic and a standard protective coating. It is designed for Modicon M340 and M580 automation platforms.

Output Configuration and Operation

The BMXDRA0815 uses electromechanical relay contacts to switch external loads. Each of its eight output channels operates as a normally open contact, closing when the corresponding output command is activated and opening when the command is removed.

The relay contacts support both AC and DC switching. Unlike transistor output modules, relay outputs can switch different voltage types without requiring the external load to use the same voltage as the PLC's internal logic supply. The eight outputs are electrically isolated, allowing separate load circuits within the limits of the module's electrical ratings.

Switching Characteristics and Load Protection

The module has an activation response time of 10 ms or less and a deactivation response time of 13 ms or less. These characteristics should be considered when selecting the module for applications involving frequent switching or time-sensitive output sequences.

The permissible switching load depends on voltage, load type, ambient temperature and electrical operating conditions. Inductive loads require particular attention because switching can generate voltage transients across relay contacts.

  • AC inductive loads require an appropriately rated RC circuit or ZNO-type surge limiter across each output channel.
  • DC inductive loads require a discharge diode on each output channel.
  • External fast-blow fuses are required for short-circuit and overload protection.

The minimum switching load is also relevant when controlling low-current signals. Contact operation should be checked against the manufacturer's specified minimum load rather than assuming that the rated voltage range guarantees reliable switching at every current level.

Modicon X80 Platform Integration

The BMXDRA0815 belongs to the Modicon X80 common I/O architecture, which provides a shared hardware environment for Modicon M340 and M580 PLC systems. It can be used in local or remote I/O configurations, subject to the selected PLC architecture and rack arrangement.

The module is installed in an appropriate X80 module rack and secured using two mounting screws. Its field connections use a compatible 20-pin connection arrangement, with cage-clamp, screw-clamp or removable spring-type terminal block options.

Technical Specifications

Parameter Specification
Model BMXDRA0815
Brand Schneider Electric
Product Series Modicon X80
Product Type Discrete Relay Output Module
Number of Outputs 8
Output Type Electromechanical Relay
Contact Configuration 8 Normally Open (NO)
Output Isolation Electrically isolated channels
Discrete Output Logic Positive
Rated AC Voltage 24-240 V AC
Rated DC Voltage 24-125 V DC
Minimum Switching Load 5 V DC / 10 mA
Output Activation Time 10 MOhm at 500 V DC
Dielectric Strength 1780 V AC at 50/60 Hz for 1 min
MTBF 3,200,000 h (product specification)
Operating Temperature 0 to 60 deg C
Relative Humidity 5-95% at 60 deg C, non-condensing
Protection Rating IP20
Protective Coating Standard version
Product Weight 0.169 kg
EAN 3606481275608
Lifecycle Carbon Footprint 157 kg CO2 eq.

Frequently Asked Questions

Q: How many relay outputs does the BMXDRA0815 provide?

A: It provides eight electrically isolated normally open relay outputs. Each channel can switch an external AC or DC load within its specified electrical switching limits.

Q: Can the BMXDRA0815 switch both AC and DC loads?

A: Yes. Its rated voltage ranges are 24-240 V AC and 24-125 V DC. However, permissible switching power and current depend on the load type and operating conditions. Inductive loads require appropriate external suppression components.

Q: Is the BMXDRA0815 compatible with Modicon M340 and M580 PLC systems?

A: Yes. It belongs to the Modicon X80 I/O family and is specified for Modicon M340 and M580 local or remote I/O configurations. The selected rack, connection block and system architecture must support the module.

การชำระเงิน: T/T, Western Union

ท่าเรือขนส่ง: เซี่ยเหมิน

ระยะเวลาดำเนินการ: โดยทั่วไป 1–3 วันทำการหลังยืนยันการชำระเงิน (ขึ้นอยู่กับสินค้าในสต็อก)

จัดส่งทั่วโลก: เราจัดส่งชิ้นส่วนระบบอัตโนมัติทางอุตสาหกรรมให้แก่ลูกค้าทั่วโลก โดยจะแจ้งค่าขนส่งพร้อมใบขอใบเสนอราคาของคุณ

คำถามที่พบบ่อย

คำถามที่พบบ่อยเกี่ยวกับใบเสนอราคา การจัดส่ง การรับประกัน และการคืนสินค้า

คลิก ขอใบเสนอราคา ในหน้าสินค้า แล้วส่งหมายเลขชิ้นส่วน จำนวนที่ต้องการ และประเทศปลายทางให้เรา ทีมฝ่ายขายของเราจะตอบกลับพร้อมข้อมูลสินค้าที่มีจำหน่าย ราคา และระยะเวลาจัดส่งโดยประมาณ

สินค้าที่มีอยู่ในสต็อกโดยปกติจะจัดเตรียมหลังจากได้รับการชำระเงินและยืนยันคำสั่งซื้อแล้ว คำสั่งซื้อส่วนใหญ่จัดส่งจากคลังสินค้าของเราในประเทศจีน แต่สถานที่จัดส่งอาจแตกต่างกันไปตามสต็อกปัจจุบัน

ใช่ เราจัดส่งชิ้นส่วนระบบอัตโนมัติทางอุตสาหกรรมให้ลูกค้าทั่วโลก ค่าจัดส่งและระยะเวลาในการขนส่งขึ้นอยู่กับปลายทาง น้ำหนักพัสดุ ขนาดสินค้า และข้อกำหนดการนำเข้าของท้องถิ่น

เราใช้บริการ DHL, FedEx, UPS และบริษัทขนส่งระหว่างประเทศอื่น ๆ เป็นประจำ โดยสามารถเลือกผู้ให้บริการขนส่งได้ตามปลายทาง ความเร็วในการจัดส่ง ขนาดของพัสดุ และความต้องการของลูกค้า

โดยทั่วไป สินค้าของเราครอบคลุมการรับประกัน 12 เดือน สินค้าที่มีสิทธิ์ยังสามารถส่งคืนได้ภายใต้นโยบายคืนเงินภายใน 30 วัน โปรดติดต่อทีมงานของเราก่อนส่งคืนสินค้าใด ๆ เพื่อยืนยันข้อกำหนดที่ใช้บังคับและคำแนะนำในการส่งคืน

Products FAQs

คุณอาจชอบสิ่งเหล่านี้ด้วย