
แจ้งเตือนทางอีเมลเมื่อสินค้านี้พร้อมจำหน่าย
- คำอธิบาย
- Reviews
- การจัดส่งและการชำระเงิน
The Schneider Electric BMXEHC0800 is a high-speed counter module for the Modicon X80 automation platform. It provides 8 counting channels with a maximum counting frequency of 10 kHz and supports single-mode and dedicated two-phase counting configurations. The module accepts 24 VDC input signals and processes counting, frequency measurement, and encoder-related signals for PLC control applications.
Product Function and Counting Capabilities
The BMXEHC0800 processes high-speed input pulses that may exceed the practical counting capability of standard PLC digital inputs. It supports several counting functions, allowing the controller to monitor pulse events, measure frequency, and track incremental changes in position or movement.
Supported counting functions include:
- Forward and reverse counting.
- 32-bit up-counting.
- Down-counting.
- Modulo (loop) counting.
- Event counting.
- Frequency measurement.
The module supports a maximum counting frequency of 10 kHz. Its 5 ms cycle time is a separate timing parameter and should not be interpreted as the maximum input pulse period.
Input Signals and Sensor Compatibility
The module operates with 24 VDC Type 3 inputs. Compatible signal sources include 2-wire and 3-wire proximity sensors rated for 19.2-30 V, as well as incremental encoders with 10-30 V push-pull outputs.
The guaranteed logic thresholds define the input signal recognition limits:
- Logic 1: 11-30 VDC, with an input current greater than 2 mA at U >= 11 V.
- Logic 0: 5 VDC, with an input current below 1.5 mA.
These thresholds help determine whether a connected sensor or encoder provides sufficient voltage and current for reliable signal recognition.
Electrical Connection and Power Requirements
The BMXEHC0800 uses one 20-pin connector for field signal connections. Its internal power consumption is specified separately for the 3.3 VDC backplane bus and the 24 VDC sensor supply.
The stated current consumption is 200 mA from the 3.3 VDC bus and 80 mA from the 24 VDC sensor supply. These values should be considered separately when checking the power budget of the X80 rack and the connected sensor circuit.
Installation and Environmental Conditions
The module is designed for installation in a Modicon X80 module rack and is secured using two screws. Its IP20 enclosure protects the electronic components against contact with fingers and solid objects of the specified size, but does not provide protection against water ingress.
The operating temperature range is 0 to 60 deg C, with a relative humidity range of 10-95%, non-condensing. The specified insulation voltage is 1500 V for 60 seconds.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXEHC0800 |
| Brand | Schneider Electric |
| Product Type | High-Speed Counter Module |
| Product Family | Modicon X80 |
| Automation Platforms | Modicon M340 / Modicon M580 |
| Number of Channels | 8 |
| Maximum Counting Frequency | 10 kHz |
| Number of Inputs | 2 single-mode; 3 dedicated two-phase mode |
| Input Type | High-speed, 24 VDC Type 3 |
| Input Voltage | 24 VDC |
| Input Voltage Limits | 24 VDC |
| Input Current | 4.5 mA |
| Guaranteed Logic 1 Voltage | 11-30 VDC |
| Guaranteed Logic 1 Current | Greater than 2 mA at U >= 11 V |
| Guaranteed Logic 0 Voltage | 5 VDC |
| Guaranteed Logic 0 Current | Less than 1.5 mA |
| Sensor Compatibility | 19.2-30 VDC 2-wire/3-wire proximity sensors |
| Encoder Compatibility | 10-30 V push-pull incremental encoders |
| Counting Functions | Forward/reverse, 32-bit up-counting, down-counting, modulo, event counting, frequency measurement |
| Cycle Time | 5 ms |
| Insulation Voltage | 1500 V for 60 s |
| Electrical Connection | 1 x 20-pin connector |
| Backplane Current Consumption | 200 mA at 3.3 VDC |
| Sensor Supply Current Consumption | 80 mA at 24 VDC |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 10-95%, non-condensing |
| Product Weight | 0.113 kg |
| Coating | Standard version |
| EAN | 3595863910131 |
| EU Directives | 2014/35/EU; 2014/30/EU |
Frequently Asked Questions
Q: What is the maximum counting frequency of the BMXEHC0800?
A: The module supports a maximum counting frequency of 10 kHz. This allows it to process pulse signals from compatible proximity sensors and incremental encoders for high-speed counting applications.
Q: Which sensors and encoders can be connected to the BMXEHC0800?
A: It supports 2-wire and 3-wire proximity sensors operating at 19.2-30 VDC and incremental encoders with 10-30 V push-pull outputs. The connected signal source must also meet the specified logic voltage and current thresholds.
Q: What power requirements should be considered when installing this module?
A: The BMXEHC0800 requires 200 mA from the 3.3 VDC backplane bus and 80 mA from the 24 VDC sensor supply. Both values should be included when checking rack power capacity and sensor supply requirements.
การชำระเงิน: T/T, Western Union
ท่าเรือขนส่ง: เซี่ยเหมิน
ระยะเวลาดำเนินการ: โดยทั่วไป 1–3 วันทำการหลังยืนยันการชำระเงิน (ขึ้นอยู่กับสินค้าในสต็อก)
จัดส่งทั่วโลก: เราจัดส่งชิ้นส่วนระบบอัตโนมัติทางอุตสาหกรรมให้แก่ลูกค้าทั่วโลก โดยจะแจ้งค่าขนส่งพร้อมใบขอใบเสนอราคาของคุณ
คำถามที่พบบ่อย
คำถามที่พบบ่อยเกี่ยวกับใบเสนอราคา การจัดส่ง การรับประกัน และการคืนสินค้าคลิก ขอใบเสนอราคา ในหน้าสินค้า แล้วส่งหมายเลขชิ้นส่วน จำนวนที่ต้องการ และประเทศปลายทางให้เรา ทีมฝ่ายขายของเราจะตอบกลับพร้อมข้อมูลสินค้าที่มีจำหน่าย ราคา และระยะเวลาจัดส่งโดยประมาณ
สินค้าที่มีอยู่ในสต็อกโดยปกติจะจัดเตรียมหลังจากได้รับการชำระเงินและยืนยันคำสั่งซื้อแล้ว คำสั่งซื้อส่วนใหญ่จัดส่งจากคลังสินค้าของเราในประเทศจีน แต่สถานที่จัดส่งอาจแตกต่างกันไปตามสต็อกปัจจุบัน
ใช่ เราจัดส่งชิ้นส่วนระบบอัตโนมัติทางอุตสาหกรรมให้ลูกค้าทั่วโลก ค่าจัดส่งและระยะเวลาในการขนส่งขึ้นอยู่กับปลายทาง น้ำหนักพัสดุ ขนาดสินค้า และข้อกำหนดการนำเข้าของท้องถิ่น
เราใช้บริการ DHL, FedEx, UPS และบริษัทขนส่งระหว่างประเทศอื่น ๆ เป็นประจำ โดยสามารถเลือกผู้ให้บริการขนส่งได้ตามปลายทาง ความเร็วในการจัดส่ง ขนาดของพัสดุ และความต้องการของลูกค้า
โดยทั่วไป สินค้าของเราครอบคลุมการรับประกัน 12 เดือน สินค้าที่มีสิทธิ์ยังสามารถส่งคืนได้ภายใต้นโยบายคืนเงินภายใน 30 วัน โปรดติดต่อทีมงานของเราก่อนส่งคืนสินค้าใด ๆ เพื่อยืนยันข้อกำหนดที่ใช้บังคับและคำแนะนำในการส่งคืน
คุณอาจชอบสิ่งเหล่านี้ด้วย
บทความในบล็อก
ข่าวสารระบบอัตโนมัติในภาคอุตสาหกรรม คู่มือด้านเทคนิค และอัปเดตผลิตภัณฑ์
