ข้ามไปยังข้อมูลผลิตภัณฑ์
1 ของ 3

Schneider Electric BMXFTA300 Modicon X80 Prefabricated Cable Assembly

มีสินค้า 18 ชิ้น ทดลองใช้ฟรี
  • Manufacturer: Schneider
  • Product No.: BMXFTA300
  • Country of origin: France
  • Product Type: Modicon X80 Prefabricated Cable Assembly
  • Condition: ใหม่เอี่ยม
  • Payment: T/T, เวสเทิร์น ยูเนียน
  • Weight: 0.5 kg
  • Shipping port: เซี่ยเหมิน
  • Warranty: 12 เดือน
  • คำอธิบาย
  • Reviews
  • การจัดส่งและการชำระเงิน

The Schneider Electric BMXFTA300, also cataloged as the BMXFTA300 prefabricated cable assembly, provides the electrical connection between Modicon M340 I/O modules and Advantys Telefast ABE 7 terminal blocks. It uses a 28-pin removable terminal block connector on the module side and a 25-pin SUB-D connector on the terminal block side, with a cable length of 3 m.

Hardware Specifications

Parameter Specification
Model BMXFTA300
Brand Schneider Electric
Product Series Modicon X80
Product Type Prefabricated Cable Assembly
Accessory Type Preformed Cable Set
Weight 0.5 kg
Cable Length 3 m
Module-Side Connection 1 removable 28-pin terminal block
Terminal Block-Side Connection 1 SUB-D 25-pin connector
Connector Configuration 28-pin terminal block to 25-pin SUB-D
Compatible I/O Modules BMXAMI0800, BMXAMI0810
Compatible Terminal Blocks ABE7CPA02, ABE7CPA03, ABE7CPA31, ABE7CPA31/E
Packaging Quantity 1 unit
EAN 3595864080451

I/O Connection Architecture and Compatibility

The BMXFTA300 provides a preassembled electrical interface between Modicon M340 analog I/O modules and Advantys Telefast ABE 7 connection systems.

Its connection arrangement consists of:

  • Module side: A removable 28-pin terminal block connects to the I/O module.
  • Terminal block side: A 25-pin SUB-D connector connects to the ABE 7 terminal block.
  • Cable assembly: A fixed 3 m cable carries the corresponding electrical connections between both interfaces.

The cable is specified for the BMXAMI0800 and BMXAMI0810 analog input modules. Compatibility also includes the ABE7CPA02, ABE7CPA03, ABE7CPA31, and ABE7CPA31/E terminal block references.

For system integration, connector pin assignments and channel wiring must correspond to the selected I/O module and terminal block configuration.

Frequently Asked Questions

Q: Can the BMXFTA300 be used with both BMXAMI0800 and BMXAMI0810?

A: Yes. Both analog input modules are explicitly listed as compatible products. The cable provides the 28-pin terminal block interface required on the module side.

Q: Does the BMXFTA300 support hot-swapping?

A: Hot-swapping capability is not specified for this cable assembly. Disconnect the associated electrical circuits and follow the module manufacturer's maintenance procedure before removing or installing connectors.

Q: What should be checked when replacing an existing BMXFTA300?

A: Verify the 28-pin removable terminal block, 25-pin SUB-D connector, 3 m cable length, and compatibility with the installed ABE 7 terminal block. Check connector condition and wiring continuity before returning the I/O circuit to service.

Field Installation Guidelines

1. Connector Verification: Confirm that the 28-pin removable terminal block matches the designated Modicon I/O module interface and that the 25-pin SUB-D connector matches the ABE 7 terminal block.

2. Cable Routing: Route the 3 m cable away from high-voltage power conductors, motor cables, and sources of electromagnetic interference where practical.

3. Mechanical Installation: Avoid excessive bending, tensile loading, twisting, or compression of the cable. Secure the assembly to prevent connector strain.

4. Electrical Inspection: Inspect connector contacts for oxidation, contamination, or mechanical damage before installation.

5. Shielding and Grounding: Follow the module and terminal block installation documentation for cable shielding and grounding arrangements. Do not assume an undocumented shield termination configuration.

6. Commissioning: Verify connector engagement, wiring continuity, channel correspondence, and analog input signal readings before placing the associated control loop into operation.

การชำระเงิน: T/T, Western Union

ท่าเรือขนส่ง: เซี่ยเหมิน

ระยะเวลาดำเนินการ: โดยทั่วไป 1–3 วันทำการหลังยืนยันการชำระเงิน (ขึ้นอยู่กับสินค้าในสต็อก)

จัดส่งทั่วโลก: เราจัดส่งชิ้นส่วนระบบอัตโนมัติทางอุตสาหกรรมให้แก่ลูกค้าทั่วโลก โดยจะแจ้งค่าขนส่งพร้อมใบขอใบเสนอราคาของคุณ

คำถามที่พบบ่อย

คำถามที่พบบ่อยเกี่ยวกับใบเสนอราคา การจัดส่ง การรับประกัน และการคืนสินค้า

คลิก ขอใบเสนอราคา ในหน้าสินค้า แล้วส่งหมายเลขชิ้นส่วน จำนวนที่ต้องการ และประเทศปลายทางให้เรา ทีมฝ่ายขายของเราจะตอบกลับพร้อมข้อมูลสินค้าที่มีจำหน่าย ราคา และระยะเวลาจัดส่งโดยประมาณ

สินค้าที่มีอยู่ในสต็อกโดยปกติจะจัดเตรียมหลังจากได้รับการชำระเงินและยืนยันคำสั่งซื้อแล้ว คำสั่งซื้อส่วนใหญ่จัดส่งจากคลังสินค้าของเราในประเทศจีน แต่สถานที่จัดส่งอาจแตกต่างกันไปตามสต็อกปัจจุบัน

ใช่ เราจัดส่งชิ้นส่วนระบบอัตโนมัติทางอุตสาหกรรมให้ลูกค้าทั่วโลก ค่าจัดส่งและระยะเวลาในการขนส่งขึ้นอยู่กับปลายทาง น้ำหนักพัสดุ ขนาดสินค้า และข้อกำหนดการนำเข้าของท้องถิ่น

เราใช้บริการ DHL, FedEx, UPS และบริษัทขนส่งระหว่างประเทศอื่น ๆ เป็นประจำ โดยสามารถเลือกผู้ให้บริการขนส่งได้ตามปลายทาง ความเร็วในการจัดส่ง ขนาดของพัสดุ และความต้องการของลูกค้า

โดยทั่วไป สินค้าของเราครอบคลุมการรับประกัน 12 เดือน สินค้าที่มีสิทธิ์ยังสามารถส่งคืนได้ภายใต้นโยบายคืนเงินภายใน 30 วัน โปรดติดต่อทีมงานของเราก่อนส่งคืนสินค้าใด ๆ เพื่อยืนยันข้อกำหนดที่ใช้บังคับและคำแนะนำในการส่งคืน

Products FAQs

คุณอาจชอบสิ่งเหล่านี้ด้วย