
Bu məhsul əlçatan olduqda e-poçtla bildiriş alıncaq
- Təsvir
- Reviews
- Çatdırılma və ödəniş
The Schneider Electric BMXCPS3500H is a Modicon X80 power supply module designed for severe environmental conditions. It converts a 100-240 V AC primary supply into the DC power required by the rack, processor, I/O modules and field sensors. Its configuration includes separate 3.3 V DC and 24 V DC secondary supply circuits, conformal coating and an extended operating temperature range.
Power Supply Configuration
The BMXCPS3500H provides separate secondary power circuits for rack electronics, I/O and processor loads, and sensor devices. Output capacity depends on the operating temperature range, so the applicable power ratings must be considered when calculating the rack power budget.
- 3.3 V DC: Supplies internal logic power to I/O modules.
- 24 V DC: Supplies the I/O modules and processor.
- 24 V DC sensor supply: Provides power for connected field sensors.
At ambient temperatures from 0 to 60 deg C, the specified secondary power ratings are higher than those available across the extended -25 to 70 deg C operating range. This distinction is important when configuring a rack for high-temperature or low-temperature service.
Electrical Protection and Diagnostics
The primary circuit has an internal fuse that is not accessible for replacement. The secondary circuits include overload, overvoltage and short-circuit protection.
Two green status LEDs indicate rack voltage OK and sensor voltage status. A front-panel RESET push-button initiates a cold restart, providing a local means of restarting the power supply.
Backplane and Electrical Connections
The module has a 5-pin connector for line supply, protective earth and the 24 V DC sensor input, together with a separate 2-pin alarm relay connector. The backplane compatibility restriction is important for replacement selection: BMXCPS3500H is not compatible with BMEXBP..02 backplanes.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXCPS3500H |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Power Supply Module |
| Application | Severe environments |
| Primary Voltage | 100-240 V AC |
| Primary Voltage Limits | 85-264 V AC |
| Network Frequency | 50/60 Hz |
| Frequency Limits | 47-63 Hz |
| Apparent Power | 0.12 kVA |
| Input Current | 0.52 A at 240 V; 1.04 A at 115 V |
| Inrush Current | 30 A at 120 V; 60 A at 240 V |
| 3.3 V DC Logic Supply | 15 W at 0 to 60 deg C; 11.3 W at -25 to 70 deg C |
| 24 V DC I/O and Processor Supply | 31.2 W at 0 to 60 deg C; 23.4 W at -25 to 70 deg C |
| 24 V DC Sensor Supply | 21.6 W at 0 to 60 deg C; 16.2 W at -25 to 70 deg C |
| Maximum Output Current | 4.5 A at 3.3 V DC; 1.3 A at 24 V DC for I/O and processor; 0.9 A for sensor supply |
| Maximum Power Dissipation | 8.5 W |
| Protection | Primary internal fuse; secondary overload, overvoltage and short-circuit protection |
| Backplane Compatibility | Not compatible with BMEXBP..02 |
| Electrical Connections | 5-pin line supply connector; 2-pin alarm relay connector |
| Status Indicators | Green rack voltage OK LED; green sensor voltage LED |
| Reset Function | RESET push-button, cold restart |
| IP Rating | IP20 |
| Operating Temperature | -25 to +70 deg C |
| Storage Temperature | -40 to +85 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Protective Treatment | Conformal coating |
| Vibration Resistance | 3 gn |
| Shock Resistance | 30 gn |
| Immunity to Microbreaks | 1 ms |
| Operating Altitude | 0-2000 m; 2000-5000 m with derating |
| Insulation Resistance | >= 100 Mohm, primary to ground and primary to secondary |
| Dielectric Strength | 1500 V primary/secondary for logic and I/O supplies; 2300 V for sensor supply |
| Weight | 0.36 kg |
| Country of Origin | United States |
| GTIN | 3595864029894 |
Environmental Resistance
The BMXCPS3500H has conformal coating and environmental resistance classifications for operation in demanding industrial environments.
Its documented environmental characteristics include:
- Gas resistance: Class Gx, ISA S71.04.
- Gas resistance: Class 3C4, IEC 60721-3-3.
- Dust and sand resistance: Class 3S4, IEC 60721-3-3.
- Mold and fungal spore resistance: Class 3B2, IEC 60721-3-3.
- Salt resistance: Level 2, IEC 68252.
- Hazardous location classification: Class I, Division 2.
Frequently Asked Questions
Q: Can the BMXCPS3500H operate at temperatures below 0 deg C?
A: Yes. Its specified operating temperature range extends from -25 to +70 deg C. However, the available secondary power ratings are reduced compared with operation between 0 and 60 deg C.
Q: Is the BMXCPS3500H compatible with all Modicon X80 backplanes?
A: No. The specified compatibility restriction excludes BMEXBP..02 backplanes. Check the exact backplane reference before selecting this module as a replacement.
Q: What happens if a secondary power circuit experiences an overload or short circuit?
A: The secondary circuits include overload, overvoltage and short-circuit protection. The module also provides separate rack voltage and sensor voltage status indicators for local diagnosis.
Ödəniş: T/T, Western Union.
Göndərmə limanı: Syamen.
Hazırlanma müddəti: Adətən ödəniş təsdiqləndikdən sonra 1–3 iş günü (stokdan asılıdır).
Dünya üzrə çatdırılma: Sənaye avtomatlaşdırma hissələrini dünyanın hər yerindəki müştərilərə göndəririk. Daşıma haqqı sorğunuzla birlikdə hesablanır.
Tez-tez verilən suallar
Təkliflər, çatdırılma, zəmanət və qaytarılma ilə bağlı tez-tez verilən suallarMəhsul səhifəsində Təklif tələb edin düyməsinə klikləyin və bizə hissə nömrəsini, tələb olunan miqdarı və təyinat ölkəsini göndərin. Satış komandamız mövcudluq, qiymət və təxmini çatdırılma müddəti barədə sizə cavab verəcək.
Anbarda olan məhsullar adətən ödəniş və sifariş təsdiqləndikdən sonra hazırlanır. Sifarişlərin əksəriyyəti Çindəki anbarımızdan göndərilir, lakin göndərilmə yeri mövcud ehtiyatdan asılı olaraq dəyişə bilər.
Bəli. Sənaye avtomatlaşdırma hissələrini dünya üzrə müştərilərə göndəririk. Çatdırılma xərci və müddəti təyinat yerindən, bağlamanın çəkisindən, məhsulun ölçüsündən və yerli idxal tələblərindən asılıdır.
Biz adətən DHL, FedEx, UPS və digər beynəlxalq kuryer xidmətlərindən istifadə edirik. Daşıyıcı təyinat yerinə, çatdırılma sürətinə, göndərişin ölçüsünə və müştərinin tələblərinə uyğun olaraq seçilə bilər.
Məhsullarımız ümumiyyətlə 12 aylıq zəmanət ilə təmin olunur. Uyğun məhsullar həmçinin 30 günlük geri ödəniş siyasətimizə əsasən qaytarıla bilər. Tətbiq olunan şərtləri və qaytarma təlimatlarını təsdiqləmək üçün hər hansı məhsulu qaytarmadan əvvəl komandamızla əlaqə saxlayın.
Bəyənə biləcəyiniz digər məhsullar
Bloq yazıları
Sənaye avtomatlaşdırılması xəbərləri, texniki təlimatlar və məhsul yenilikləri.
