
Bu məhsul əlçatan olduqda e-poçtla bildiriş alıncaq
- Təsvir
- Reviews
- Çatdırılma və ödəniş
Configured for high-speed analog signal acquisition in the Modicon X80 I/O platform, the Schneider Electric BMXAMI0800RU (BMXAMI0800 analog input module) provides 8 non-isolated analog input channels for voltage and current measurement. It mounts on Modicon X80 backplanes and supports Modicon M340 and Modicon M580 controllers.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | BMXAMI0800RU |
| Brand | Schneider Electric |
| Product Family | Modicon X80 |
| Product Type | Analog input module |
| Compatible Controllers | Modicon M340, Modicon M580 |
| Number of Channels | 8 analog inputs |
| Input Type | High-level analog input |
| Channel Isolation | Non-isolated between channels |
| Voltage Input | +/-10 V, +/-5 V, 0...10 V, 0...5 V, 1...5 V |
| Current Input | +/-20 mA, 0...20 mA, 4...20 mA |
| A/D Conversion | 16 bits |
| Resolution | 15 bits + sign |
| Voltage Input Impedance | 10 MOhm |
| Current Input Impedance | 250 Ohm |
| Fast Read Cycle | 1 ms + 1 ms x number of channels used |
| Nominal Read Cycle | 9 ms for 8 channels |
| Measurement Error | Up to +/-0.1% of full scale for voltage inputs and up to +/-0.3% of full scale for current inputs over 0...60 deg C |
| Digital Filtering | First-order digital filtering |
| Crosstalk Attenuation | Minimum 80 dB |
| Common Mode Rejection | 100 dB |
| Channel-to-Bus Isolation | 1400 V DC |
| Channel-to-Ground Isolation | 1400 V DC |
| Maximum Input Overload | Up to +/-30 V for voltage ranges; up to +/-30 mA for current ranges |
| Connection | 28-way removable terminal block or FTB pre-wired cable |
| Power Consumption | 0.90 W typical, 1.10 W maximum at 24 VDC; 0.32 W typical, 0.48 W maximum at 3.3 VDC |
| Current Consumption | 150 mA at 3.3 VDC; 41 mA at 24 VDC |
| Weight | 0.165 kg |
| Operating Temp | 0...60 deg C |
| Storage Temp | -40...85 deg C |
| Relative Humidity | 5...95% at 55 deg C, non-condensing |
| Protection Rating | IP20 |
| Vibration Resistance | 3 gn |
| Shock Resistance | 30 gn |
| Operating Altitude | 0...2000 m; 2000...5000 m with derating |
| Protective Treatment | Conformal coating |
| Status Indication | RUN LED, channel diagnostic LEDs, ERR LED, I/O LED |
| Certifications | CE, RCM, CSA, EAC, Merchant Navy, UL |
| Standards | IEC 61010-2-201, IEC 61131-2, UL 61010-2-201, CSA C22.2 No 61010-2-201 |
| Origin | Not specified in the provided data |
Modicon X80 Analog Signal Processing
The BMXAMI0800RU provides eight analog acquisition channels within a single Modicon X80 module position. Voltage and current signals are converted with 16-bit A/D conversion and a stated resolution of 15 bits + sign. The module supports voltage ranges from +/-10 V to 1...5 V and current ranges from +/-20 mA to 4...20 mA.
The fast read cycle is defined as 1 ms plus 1 ms for each active channel. With all 8 channels active, the stated nominal read cycle is 9 ms. First-order digital filtering is provided for the acquired values.
The module specifies a minimum crosstalk attenuation of 80 dB and common mode rejection of 100 dB. These parameters define the signal separation and common-mode rejection characteristics of the analog acquisition circuit.
Conformal Coating and Backplane Integration
The RU version is specified with conformal coating for harsh-environment protection. The module mounts directly on a Modicon X80 backplane and interfaces with field wiring through a 28-way removable terminal block or FTB pre-wired cable.
The provided data identifies the input channels as non-isolated between channels while also specifying 1400 V DC isolation between channels and ground and between channels and the bus. Installation documentation should therefore be checked against the exact hardware revision and wiring configuration before applying channel-to-channel isolation assumptions.
Frequently Asked Questions
Q: How many analog channels does the BMXAMI0800RU provide?
A: It provides 8 analog input channels.
Q: What signal ranges are supported?
A: Voltage ranges include +/-10 V, +/-5 V, 0...10 V, 0...5 V, and 1...5 V. Current ranges include +/-20 mA, 0...20 mA, and 4...20 mA.
Q: What is the stated power consumption?
A: The module consumes 0.90 W typical and 1.10 W maximum at 24 VDC, with an additional stated 3.3 VDC consumption of 0.32 W typical and 0.48 W maximum.
Field Installation Guidelines
Install the BMXAMI0800RU on the specified Modicon X80 backplane and secure the module before connecting field wiring. Use the specified 28-way removable terminal block or compatible FTB pre-wired cable interface.
Keep analog signal wiring separated from high-current power conductors and switching circuits where practical. Maintain appropriate cable routing and shielding practices for low-level analog signals. Terminate cable shields according to the control-system grounding design and the applicable installation documentation.
Verify the selected voltage or current input range before commissioning each channel. For current inputs requiring an external shunt or specified wiring arrangement, verify the resistor value and wiring configuration before applying the field signal.
The module has IP20 protection and a stated operating range of 0...60 deg C. Confirm cabinet ventilation, humidity control, vibration conditions, and installation altitude against the specified environmental limits before commissioning.
Ödəniş: T/T, Western Union.
Göndərmə limanı: Syamen.
Hazırlanma müddəti: Adətən ödəniş təsdiqləndikdən sonra 1–3 iş günü (stokdan asılıdır).
Dünya üzrə çatdırılma: Sənaye avtomatlaşdırma hissələrini dünyanın hər yerindəki müştərilərə göndəririk. Daşıma haqqı sorğunuzla birlikdə hesablanır.
Tez-tez verilən suallar
Təkliflər, çatdırılma, zəmanət və qaytarılma ilə bağlı tez-tez verilən suallarMəhsul səhifəsində Təklif tələb edin düyməsinə klikləyin və bizə hissə nömrəsini, tələb olunan miqdarı və təyinat ölkəsini göndərin. Satış komandamız mövcudluq, qiymət və təxmini çatdırılma müddəti barədə sizə cavab verəcək.
Anbarda olan məhsullar adətən ödəniş və sifariş təsdiqləndikdən sonra hazırlanır. Sifarişlərin əksəriyyəti Çindəki anbarımızdan göndərilir, lakin göndərilmə yeri mövcud ehtiyatdan asılı olaraq dəyişə bilər.
Bəli. Sənaye avtomatlaşdırma hissələrini dünya üzrə müştərilərə göndəririk. Çatdırılma xərci və müddəti təyinat yerindən, bağlamanın çəkisindən, məhsulun ölçüsündən və yerli idxal tələblərindən asılıdır.
Biz adətən DHL, FedEx, UPS və digər beynəlxalq kuryer xidmətlərindən istifadə edirik. Daşıyıcı təyinat yerinə, çatdırılma sürətinə, göndərişin ölçüsünə və müştərinin tələblərinə uyğun olaraq seçilə bilər.
Məhsullarımız ümumiyyətlə 12 aylıq zəmanət ilə təmin olunur. Uyğun məhsullar həmçinin 30 günlük geri ödəniş siyasətimizə əsasən qaytarıla bilər. Tətbiq olunan şərtləri və qaytarma təlimatlarını təsdiqləmək üçün hər hansı məhsulu qaytarmadan əvvəl komandamızla əlaqə saxlayın.
Bəyənə biləcəyiniz digər məhsullar
Bloq yazıları
Sənaye avtomatlaşdırılması xəbərləri, texniki təlimatlar və məhsul yenilikləri.
