
Recibir una notificación por correo electrónico cuando este producto esté disponible
- Descripción
- Reviews
- Envío y pago
The Schneider Electric BMXDRA1605 is a 16-channel discrete relay output module in the Modicon X80 series. It provides normally open (NO) relay contacts for switching external AC or DC loads, with a specified switching capacity of 3 A. The module supports 24-240 V AC and 24-48 V DC applications and is designed for integration into Modicon M340 and M580 automation platforms.
Output Function and Configuration
The BMXDRA1605 uses electromechanical relay contacts to switch external loads according to output commands from the PLC. Its 16 normally open outputs remain open when de-energized and close when the corresponding output relay is activated.
The AC and DC voltage ranges allow the module to control different types of field circuits. The minimum switching current is 1 mA at 5 V DC, which is relevant when evaluating low-current loads. The specified output response times are less than 8 ms for activation and 10 ms for deactivation.
Platform Compatibility and Mounting
The module belongs to the Modicon X80 I/O platform, which provides a common module architecture for Modicon M340 and M580 PLC systems, including local and remote I/O configurations. It is installed in a compatible module rack and secured with two screws.
The connection is made through a 20-pin removable terminal block. The source identifies cage-clamp, screw-clamp and removable spring-terminal block options. The terminal block and associated wiring should be selected according to the cabinet configuration and field wiring requirements.
Electrical Isolation and Environmental Conditions
The module has an insulation resistance greater than 10 MOhm at 500 V DC and a dielectric withstand rating of 2000 V AC at 50/60 Hz for 1 minute. These specifications describe its insulation characteristics and should be considered when checking the separation requirements between control and field circuits.
The BMXDRA1605 has an IP20 protection rating and supports operation from 0 to 60 deg C. Relative humidity is specified as 5-95% at 55 deg C, without condensation. Its reported MTBF is approximately 2.1 million hours.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDRA1605 |
| Brand | Schneider Electric |
| Series | Modicon X80 |
| Product Type | Discrete Relay Output Module |
| Number of Outputs | 16 |
| Output Type | Normally Open (NO) Relay Contacts |
| Switching Voltage | 24-240 V AC / 24-48 V DC |
| Switching Current | 3 A |
| Minimum Switching Current | 1 mA at 5 V DC |
| Output Response Time - Activation | Less than 8 ms |
| Output Response Time - Deactivation | 10 ms |
| Discrete Output Logic | Positive |
| Insulation Resistance | Greater than 10 MOhm at 500 V DC |
| Dielectric Withstand Voltage | 2000 V AC at 50/60 Hz for 1 min |
| MTBF | Approximately 2,100,000 h |
| Mounting | Modicon X80 Module Rack; secured with 2 screws |
| Connection | 20-pin removable terminal block |
| Protection Rating | IP20 |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 5-95% at 55 deg C, non-condensing |
| Coating | Standard version |
| Product Weight | 0.15 kg |
| EAN | 3595863909234 |
| Environmental Carbon Footprint | 146 kg CO2 eq. |
Frequently Asked Questions
Q: How many relay outputs does the BMXDRA1605 provide?
A: It provides 16 normally open relay outputs. Each output switches an external circuit in response to its corresponding PLC output command.
Q: Can the BMXDRA1605 switch both AC and DC loads?
A: Yes. The specified switching voltage ranges are 24-240 V AC and 24-48 V DC, with a rated switching current of 3 A. The actual load must also comply with the applicable contact ratings and switching conditions.
Q: Which PLC platforms support the BMXDRA1605?
A: The module is specified for Modicon M340 and Modicon M580 PLC platforms, including local and remote I/O configurations. A compatible Modicon X80 rack and 20-pin terminal block are required.
Output Protection and Switching Limits
For inductive loads, the external circuit requires suitable suppression to limit switching overvoltage. Schneider's technical documentation specifies discharge diodes for DC outputs and RC circuits or ZNO surge limiters for AC outputs.
The manufacturer's product datasheet specifies a conventional free-air thermal current (Ith) of 2 A. It also provides load-dependent electrical durability ratings under AC-12, AC-15, DC-12 and DC-13 utilization categories. These ratings should be checked against the actual load rather than treating the 3 A figure in the product listing as a universal continuous switching rating.
Pago: T/T, Western Union.
Puerto de envío: Xiamen.
Plazo de entrega: Normalmente, de 1 a 3 días laborables después de confirmar el pago (sujeto a disponibilidad).
Envíos a todo el mundo: Enviamos piezas de automatización industrial a clientes de todo el mundo. El flete se cotiza con su solicitud de cotización.
Preguntas frecuentes
Preguntas frecuentes sobre cotizaciones, envíos, garantía y devolucionesHaz clic en Solicitar un presupuesto en la página del producto y envíanos el número de pieza, la cantidad necesaria y el país de destino. Nuestro equipo de ventas responderá con la disponibilidad actual, el precio y el plazo de entrega estimado.
Los artículos disponibles normalmente se preparan después del pago y la confirmación del pedido. La mayoría de los pedidos se envían desde nuestro almacén en China, aunque la ubicación del envío puede variar según el inventario disponible.
Sí. Enviamos piezas de automatización industrial a clientes de todo el mundo. El costo de envío y el tiempo de tránsito dependen del destino, el peso del paquete, el tamaño del producto y los requisitos locales de importación.
Usamos habitualmente DHL, FedEx, UPS y otros servicios de mensajería internacionales. El transportista puede seleccionarse según el destino, la velocidad de entrega, el tamaño del envío y los requisitos del cliente.
Nuestros productos generalmente están cubiertos por una garantía de 12 meses. Los productos elegibles también pueden devolverse conforme a nuestra política de reembolso de 30 días. Ponte en contacto con nuestro equipo antes de devolver cualquier artículo para confirmar los términos aplicables y las instrucciones de devolución.
También te puede gustar
Publicaciones del blog
Noticias sobre automatización industrial, guías técnicas y actualizaciones de productos.
