Ir a la información del producto
1 de 3

Schneider Electric BMXCRA31200 Modicon X80 Ethernet RIO Head Adapter

18 disponibles en stock
  • Manufacturer: Schneider
  • Product No.: BMXCRA31200
  • Country of origin: France
  • Product Type: Modicon X80 Ethernet RIO Head Adapter
  • Condition: Completamente nuevo
  • Payment: T/T, Western Union
  • Weight: 0.225 kg
  • Shipping port: Xiamen
  • Warranty: 12 meses
  • Descripción
  • Reviews
  • Envío y pago

The Schneider Electric BMXCRA31200, also cataloged as the BMXCRA31200 Ethernet Remote I/O (RIO) Head Adapter, provides EtherNet/IP communication between a Modicon M580 or compatible automation controller and distributed Modicon X80 I/O modules. It collects input data from remote modules and distributes output data received from the controller through a two-port Ethernet RIO network.

Hardware Specifications

Parameter Specification
Model BMXCRA31200
Brand Schneider Electric
Series Modicon X80
Product Type Ethernet Remote I/O Head Adapter
Weight 0.225 kg
Dimensions 32 x 100 x 87.5 mm (W x H x D)
Operating Temp 0 to 60 deg C
Storage Temperature -40 to 85 deg C
Power Consumption 1200 mA current consumption
Input Voltage 3.3 VDC
Bus Type X-Bus via remote module rack
Ethernet Ports 2 x RJ45
Communication Protocol EtherNet/IP
Network Type IPv4
Ethernet Speed 10/100 Mbit/s
Ethernet Interface 10/100BASE-TX
Network Redundancy RSTP ring topology support
Communication Modes Half-duplex, Full-duplex, Auto-Negotiation, Auto-MDIX
Compatible Controllers Modicon M580, Modicon Quantum
Digital I/O Capacity 0 to 128 channels
Analog I/O Capacity 0 to 16 channels
Diagnostic Services Modbus TCP Server, SNMP Agent, SNTP Client, DHCP Client, TFTP Client, FTP Client, FDR Client
Additional Services QoS, CIP Explicit Messaging, Syslog
Configuration Function CCOTF (Configuration Change on the Fly)
Event Timestamping 10 ms
Protection Rating IP20
Installation Rack-mounted, secured with two screws
Maximum Operating Altitude 2000 m
Maximum Transport Altitude 3000 m
Relative Humidity 95%, non-condensing
Certifications CE, UL, CSA, RCM, EAC, Merchant Navy
Standards IEC 61131-2, IEC 61010-2-201, IEC 61850-3, IEC 61000-6-5
EAN 3595864132457

EtherNet/IP Communication and Remote I/O Architecture

The BMXCRA31200 operates as the communication head of a Modicon X80 Ethernet Remote I/O drop. Its two RJ45 interfaces connect the remote rack to the Ethernet RIO network using EtherNet/IP.

The data exchange follows two directions:

  • Input processing: Remote digital and analog input modules acquire field signals and transfer the collected data through the X-Bus to the head adapter. The adapter communicates this information to the controller over the Ethernet RIO network.
  • Output processing: The adapter receives output data from the controller and distributes it to the corresponding remote output modules through the X-Bus.

RSTP support enables ring network topology. The adapter also provides network diagnostics, device diagnostics through Device DDT, and a 10 ms timestamping function for event data.

CCOTF allows supported configuration changes without stopping the PLC. Actual availability depends on the controller architecture, configuration and supported module functions.

Frequently Asked Questions

Q: Does the BMXCRA31200 support hot-swapping?

A: The supplied documentation specifies rack installation and fastening with two screws but does not establish hot-swap capability. Replacement procedures should follow the Modicon X80 hardware and system maintenance instructions.

Q: What is the current consumption and backplane voltage of this adapter?

A: The specified current consumption is 1200 mA, with an input voltage of 3.3 VDC. The rack power budget should account for this load together with the installed I/O modules.

Q: Can the BMXCRA31200 operate in an Ethernet ring network?

A: Yes. It supports RSTP ring topology through its two Ethernet ports. Network configuration and recovery behavior must be coordinated with the connected Ethernet RIO devices and controller architecture.

Field Installation Guidelines

  1. Rack Installation: Install the BMXCRA31200 in the designated Modicon X80 module rack and secure it using the specified two mounting screws.
  2. Power Verification: Check the rack power supply and verify that the specified 3.3 VDC input and 1200 mA current requirement are accommodated by the system power budget.
  3. Ethernet Connections: Connect the two RJ45 interfaces to the designated Ethernet RIO network ports. Verify cable integrity, connector engagement and network topology before commissioning.
  4. Network Configuration: Configure the adapter within the controller's Ethernet RIO architecture. Check IP addressing, EtherNet/IP communication and RSTP settings.
  5. Grounding and Shielding: Follow Schneider Electric grounding instructions for the X80 rack and Ethernet installation. Maintain appropriate separation between communication cables and high-voltage or motor power wiring.
  6. LED Diagnostics: Inspect the RUN, ERR, Mod Status, Net Status and STS indicators. Confirm normal module operation and Ethernet communication before enabling field output operations.
  7. Environmental Conditions: Maintain an operating temperature between 0 and 60 deg C. The enclosure must provide protection appropriate to the module's IP20 rating.
  8. Configuration Validation: Verify I/O channel allocation, Device DDT diagnostics and controller communication after installation. Test input acquisition and output updates before returning the remote station to service.

Pago: T/T, Western Union.

Puerto de envío: Xiamen.

Plazo de entrega: Normalmente, de 1 a 3 días laborables después de confirmar el pago (sujeto a disponibilidad).

Envíos a todo el mundo: Enviamos piezas de automatización industrial a clientes de todo el mundo. El flete se cotiza con su solicitud de cotización.

Preguntas frecuentes

Preguntas frecuentes sobre cotizaciones, envíos, garantía y devoluciones

Haz clic en Solicitar un presupuesto en la página del producto y envíanos el número de pieza, la cantidad necesaria y el país de destino. Nuestro equipo de ventas responderá con la disponibilidad actual, el precio y el plazo de entrega estimado.

Los artículos disponibles normalmente se preparan después del pago y la confirmación del pedido. La mayoría de los pedidos se envían desde nuestro almacén en China, aunque la ubicación del envío puede variar según el inventario disponible.

Sí. Enviamos piezas de automatización industrial a clientes de todo el mundo. El costo de envío y el tiempo de tránsito dependen del destino, el peso del paquete, el tamaño del producto y los requisitos locales de importación.

Usamos habitualmente DHL, FedEx, UPS y otros servicios de mensajería internacionales. El transportista puede seleccionarse según el destino, la velocidad de entrega, el tamaño del envío y los requisitos del cliente.

Nuestros productos generalmente están cubiertos por una garantía de 12 meses. Los productos elegibles también pueden devolverse conforme a nuestra política de reembolso de 30 días. Ponte en contacto con nuestro equipo antes de devolver cualquier artículo para confirmar los términos aplicables y las instrucciones de devolución.

Products FAQs

También te puede gustar