
Recibir una notificación por correo electrónico cuando este producto esté disponible
- Descripción
- Reviews
- Envío y pago
The Schneider Electric BMXDDO6402K is a 64-channel discrete transistor output module in the Modicon X80 range. It operates with a 24 VDC output supply and uses positive output logic. The module provides individual channel control, output status detection thresholds, and protection against reverse polarity, external short circuits, overloads, and overvoltage.
Output Configuration and Operation
The BMXDDO6402K provides 64 transistor output channels for controlling external actuators and other discrete loads. Its positive output logic determines the output switching arrangement. The specified output response time is 1.2 ms, which defines the delay between an output command and the corresponding output response.
The module supports output paralleling, with a maximum of three outputs. This configuration must follow the manufacturer's channel and load restrictions. The specified switching frequency is expressed as 0.5/LI² Hz, so the applicable load inductance and current conditions should be checked before selecting a switching rate.
Electrical Protection and Diagnostics
The output circuits include reverse-polarity, external short-circuit, overload, and overvoltage protection. An external fuse is also specified as part of the protection arrangement. These functions address electrical faults that can occur in field wiring and connected loads.
The module provides voltage detection thresholds for preactuator fault monitoring. A voltage below 14 VDC indicates a preactuator fault, while a voltage above 18 VDC is specified for preactuator detection at state 0. These thresholds are relevant when checking output-side voltage conditions during troubleshooting.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXDDO6402K |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | Discrete Transistor Output Module |
| Number of Outputs | 64 |
| Output Technology | Solid-state transistor |
| Output Logic | Positive |
| Rated Output Voltage | 24 VDC |
| Output Voltage Range | 19-30 VDC |
| Rated Current per Channel | 0.1 A |
| Maximum Current per Module | 6.4 A |
| Output Response Time | 1.2 ms |
| Maximum Parallel Outputs | 3 |
| Maximum Overload Duration | 15 ms |
| Switching Frequency | 0.5/LI² Hz |
| Minimum Ohmic Load Impedance | 220 Ohm |
| Voltage Detection Threshold | Below 14 VDC: preactuator fault; above 18 VDC: preactuator at state 0 |
| Insulation Resistance | Greater than 10 MOhm at 500 VDC |
| Dielectric Strength | 1500 VAC, 50/60 Hz, 1 min (output/ground and output/internal logic); 500 VDC, 1 min (between channel groups) |
| Protection | Reverse polarity, short circuit, overload and overvoltage |
| Required External Fuse | 2 A fast-blow fuse per 16-channel group |
| IP Rating | IP20 |
| Protective Treatment | Standard version |
| MTBF | 150,000 hours |
| Net Weight | 0.15 kg |
| Country of Origin | USA |
| GTIN | 3595863910490 |
System Integration
The BMXDDO6402K belongs to the Modicon X80 common I/O platform, which is used with Modicon M340 and M580 programmable automation controllers. Its 64-channel configuration provides a high-density discrete output interface for rack-based control systems.
The module uses two 40-pin connectors for field output connections. The 64 channels are arranged in four groups of 16, with an external 2 A fast-blow fuse specified for each group. This grouping is important when planning field wiring and fault isolation.
Frequently Asked Questions
Q: What is the rated output current of the BMXDDO6402K?
A: The rated output current is 0.1 A per channel, with a maximum aggregate module current of 6.4 A. The total load must remain within the module limit even when multiple channels operate simultaneously.
Q: Can the BMXDDO6402K drive inductive loads?
A: The module supports transistor output switching, but the permissible switching frequency depends on load inductance and current. The specified frequency relationship is 0.5/LI² Hz. Check the load characteristics and manufacturer's switching limits before application.
Q: What external protection is required?
A: A 2 A fast-blow fuse is specified for each 16-channel group. The module also incorporates electronic overload, short-circuit, reverse-polarity and overvoltage protection.
Pago: T/T, Western Union.
Puerto de envío: Xiamen.
Plazo de entrega: Normalmente, de 1 a 3 días laborables después de confirmar el pago (sujeto a disponibilidad).
Envíos a todo el mundo: Enviamos piezas de automatización industrial a clientes de todo el mundo. El flete se cotiza con su solicitud de cotización.
Preguntas frecuentes
Preguntas frecuentes sobre cotizaciones, envíos, garantía y devolucionesHaz clic en Solicitar un presupuesto en la página del producto y envíanos el número de pieza, la cantidad necesaria y el país de destino. Nuestro equipo de ventas responderá con la disponibilidad actual, el precio y el plazo de entrega estimado.
Los artículos disponibles normalmente se preparan después del pago y la confirmación del pedido. La mayoría de los pedidos se envían desde nuestro almacén en China, aunque la ubicación del envío puede variar según el inventario disponible.
Sí. Enviamos piezas de automatización industrial a clientes de todo el mundo. El costo de envío y el tiempo de tránsito dependen del destino, el peso del paquete, el tamaño del producto y los requisitos locales de importación.
Usamos habitualmente DHL, FedEx, UPS y otros servicios de mensajería internacionales. El transportista puede seleccionarse según el destino, la velocidad de entrega, el tamaño del envío y los requisitos del cliente.
Nuestros productos generalmente están cubiertos por una garantía de 12 meses. Los productos elegibles también pueden devolverse conforme a nuestra política de reembolso de 30 días. Ponte en contacto con nuestro equipo antes de devolver cualquier artículo para confirmar los términos aplicables y las instrucciones de devolución.
También te puede gustar
Publicaciones del blog
Noticias sobre automatización industrial, guías técnicas y actualizaciones de productos.
