
Recibir una notificación por correo electrónico cuando este producto esté disponible
- Descripción
- Reviews
- Envío y pago
The Schneider Electric BMXEHC0200 is a two-channel high-speed counter module for the Modicon automation platform. It processes pulse signals from incremental encoders and 2-wire or 3-wire proximity sensors, with a maximum counting frequency of 60 kHz. The module provides six inputs and two 24 V DC outputs, supporting multiple counting and measurement functions, including frequency measurement, pulse-width modulation and 32-bit counting.
Counting Channels and Input Configuration
The BMXEHC0200 provides two independent high-speed counting channels, with six inputs divided into three high-speed inputs and three auxiliary inputs. This configuration allows the module to receive encoder or proximity sensor signals and use auxiliary signals for counting control and synchronization functions.
Supported input devices include:
- 2-wire and 3-wire proximity sensors operating at 19.2-30 V DC.
- Incremental encoders with 10-30 V DC push-pull outputs.
- 24 V DC Type 3 input signals.
The maximum counting frequency is 60 kHz. The module has a 1 ms cycle time, while the actual measurement limits depend on the selected counting mode and input signal characteristics.
Counting and Measurement Functions
The module supports several operating modes for processing pulse signals and calculating process values:
- Loop (modulo) counting for cyclic counting within a configured range.
- Up-counting and down-counting.
- 32-bit event counting.
- Frequency measurement for pulse-based speed or rate monitoring.
- Ratio measurement between two input signals.
- Time-period measurement.
- Pulse-width modulation (PWM).
- Event counting.
These functions allow the PLC application to process pulse information directly through the counting module rather than relying entirely on standard cyclic input processing. The appropriate operating mode and input configuration must be selected according to the signal source and measurement requirements.
24 V DC Outputs and Electrical Protection
The BMXEHC0200 has two 24 V DC outputs with configurable positive or negative logic. Each output supports a maximum current of 0.5 A, with a maximum combined module output current of 2 A specified in the product data.
The outputs include integrated overload and short-circuit protection. The specified maximum leakage current in the OFF state is 0.1 mA, and the maximum voltage drop in the ON state is less than 3 V.
The module also provides sensor power distribution with short-circuit and overload protection. When planning the installation, the sensor supply requirements and connected output loads should be checked against the module's electrical limits.
Electrical and Mechanical Specifications
The module operates with a 24 V DC sensor and I/O configuration. Its backplane power consumption is specified as 200 mA on the 3.3 V bus and 40 mA on the 24 V rack bus. The sensor supply current is specified separately as 80 mA in the supplied product data.
The module provides 1500 V isolation for 60 seconds according to the product specification. Its IP20 enclosure protects the internal electronics against contact with solid objects within the protection rating; it does not provide protection against water ingress.
For installation, the module is fitted into the appropriate rack position and secured using two screws.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | BMXEHC0200 |
| Brand | Schneider Electric |
| Product Range | Modicon X80 |
| Product Type | High-Speed Counter Module |
| Automation Platform | Modicon M340 |
| Number of Channels | 2 |
| Maximum Counting Frequency | 60 kHz |
| Number of Inputs | 6 |
| High-Speed Inputs | 3 |
| Auxiliary Inputs | 3 |
| Input Voltage | 24 V DC Type 3 |
| Input Compatibility | 19.2-30 V DC, 2-wire/3-wire proximity sensors |
| Encoder Compatibility | 10-30 V DC incremental encoders with push-pull outputs |
| Number of Outputs | 2 |
| Output Voltage | 24 V DC |
| Maximum Output Current | 0.5 A per output |
| Maximum Module Output Current | 2 A |
| Output Logic | Positive or negative, configurable |
| Maximum Leakage Current | 0.1 mA in OFF state |
| Maximum Voltage Drop | Less than 3 V in ON state |
| Output Protection | Integrated overload and short-circuit protection |
| Counter Functions | Modulo counting, up/down counting, 32-bit counting, frequency measurement, ratio measurement, time-period measurement, event counting and PWM |
| Module Cycle Time | 1 ms |
| Isolation Voltage | 1500 V for 60 s |
| 3.3 V Bus Current Consumption | 200 mA typical |
| 24 V Rack Current Consumption | 40 mA typical |
| 24 V Sensor Supply Current | 80 mA |
| Mounting | Modicon rack, secured with 2 screws |
| Dimensions (W x H x D) | 32 x 103.76 x 92 mm |
| Operating Temperature | 0 to 60 deg C |
| Relative Humidity | 10-95%, non-condensing |
| Protection Rating | IP20 |
| Product Weight | 0.112 kg |
| Coating | Standard version |
| EAN | 3595863910148 |
| Lifecycle Carbon Footprint | 101 kg CO2 eq. |
Frequently Asked Questions
Q: What is the difference between the BMXEHC0200 and a standard digital input module?
A: The BMXEHC0200 is designed for high-speed pulse counting and measurement. It processes encoder and proximity sensor pulses at frequencies up to 60 kHz and supports dedicated counting functions, whereas a standard digital input module primarily handles discrete ON/OFF signals.
Q: Which encoders and proximity sensors can be connected to the BMXEHC0200?
A: It supports 2-wire and 3-wire proximity sensors with 19.2-30 V DC operating voltage and incremental encoders with 10-30 V DC push-pull outputs. The encoder output type and signal voltage must match the module input specifications.
Q: Can the BMXEHC0200 be replaced while the Modicon rack is powered?
A: Yes. Schneider Electric's BMXEHC0200 hardware manual specifies hot replacement capability. The rack can remain powered during removal and reinsertion, but the counter may need to be revalidated after the module is reinserted.
Pago: T/T, Western Union.
Puerto de envío: Xiamen.
Plazo de entrega: Normalmente, de 1 a 3 días laborables después de confirmar el pago (sujeto a disponibilidad).
Envíos a todo el mundo: Enviamos piezas de automatización industrial a clientes de todo el mundo. El flete se cotiza con su solicitud de cotización.
Preguntas frecuentes
Preguntas frecuentes sobre cotizaciones, envíos, garantía y devolucionesHaz clic en Solicitar un presupuesto en la página del producto y envíanos el número de pieza, la cantidad necesaria y el país de destino. Nuestro equipo de ventas responderá con la disponibilidad actual, el precio y el plazo de entrega estimado.
Los artículos disponibles normalmente se preparan después del pago y la confirmación del pedido. La mayoría de los pedidos se envían desde nuestro almacén en China, aunque la ubicación del envío puede variar según el inventario disponible.
Sí. Enviamos piezas de automatización industrial a clientes de todo el mundo. El costo de envío y el tiempo de tránsito dependen del destino, el peso del paquete, el tamaño del producto y los requisitos locales de importación.
Usamos habitualmente DHL, FedEx, UPS y otros servicios de mensajería internacionales. El transportista puede seleccionarse según el destino, la velocidad de entrega, el tamaño del envío y los requisitos del cliente.
Nuestros productos generalmente están cubiertos por una garantía de 12 meses. Los productos elegibles también pueden devolverse conforme a nuestra política de reembolso de 30 días. Ponte en contacto con nuestro equipo antes de devolver cualquier artículo para confirmar los términos aplicables y las instrucciones de devolución.
También te puede gustar
Publicaciones del blog
Noticias sobre automatización industrial, guías técnicas y actualizaciones de productos.
